Re: [PATCH v4 2/5] media: dt: bindings: Add binding for NVIDIA Tegra Video Decoder Engine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11.11.2017 17:21, Vladimir Zapolskiy wrote:
> Hi Dmitry,
> 
> On 10/20/2017 12:34 AM, Dmitry Osipenko wrote:
>> Add binding documentation for the Video Decoder Engine which is found
>> on NVIDIA Tegra20/30/114/124/132 SoC's.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
>> ---
>>  .../devicetree/bindings/media/nvidia,tegra-vde.txt | 55 ++++++++++++++++++++++
>>  1 file changed, 55 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
>> new file mode 100644
>> index 000000000000..470237ed6fe5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
>> @@ -0,0 +1,55 @@
>> +NVIDIA Tegra Video Decoder Engine
>> +
>> +Required properties:
>> +- compatible : Must contain one of the following values:
>> +   - "nvidia,tegra20-vde"
>> +   - "nvidia,tegra30-vde"
>> +   - "nvidia,tegra114-vde"
>> +   - "nvidia,tegra124-vde"
>> +   - "nvidia,tegra132-vde"
>> +- reg : Must contain an entry for each entry in reg-names.
>> +- reg-names : Must include the following entries:
>> +  - sxe
>> +  - bsev
>> +  - mbe
>> +  - ppe
>> +  - mce
>> +  - tfe
>> +  - ppb
>> +  - vdma
>> +  - frameid
> 
> I've already mentioned it in my review of the driver code, but the
> version from v3 with a single region is more preferable.
> 
> Also it implies that "reg-names" property will be removed.
> 

Please see my reply to the drivers code review.

>> +- iram : Must contain phandle to the mmio-sram device node that represents
>> +         IRAM region used by VDE.
>> +- interrupts : Must contain an entry for each entry in interrupt-names.
>> +- interrupt-names : Must include the following entries:
>> +  - sync-token
>> +  - bsev
>> +  - sxe
>> +- clocks : Must include the following entries:
>> +  - vde
>> +- resets : Must include the following entries:
>> +  - vde
>> +
>> +Example:
>> +
>> +video-codec@6001a000 {
>> +	compatible = "nvidia,tegra20-vde";
>> +	reg = <0x6001a000 0x1000 /* Syntax Engine */
>> +	       0x6001b000 0x1000 /* Video Bitstream Engine */
>> +	       0x6001c000  0x100 /* Macroblock Engine */
>> +	       0x6001c200  0x100 /* Post-processing Engine */
>> +	       0x6001c400  0x100 /* Motion Compensation Engine */
>> +	       0x6001c600  0x100 /* Transform Engine */
>> +	       0x6001c800  0x100 /* Pixel prediction block */
>> +	       0x6001ca00  0x100 /* Video DMA */
>> +	       0x6001d800  0x300 /* Video frame controls */>;
>> +	reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
>> +		    "tfe", "ppb", "vdma", "frameid";
>> +	iram = <&vde_pool>; /* IRAM region */
>> +	interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
>> +		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
>> +		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
>> +	interrupt-names = "sync-token", "bsev", "sxe";
>> +	clocks = <&tegra_car TEGRA20_CLK_VDE>;
>> +	resets = <&tegra_car 61>;
>> +};
>>




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux