[PATCH v7 12/25] rcar-vin: move media bus configuration to struct rvin_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bus configuration will once the driver is extended to support Gen3
contain information not specific to only the directly connected parallel
subdevice. Move it to struct rvin_info to show it's not always coupled
to the parallel subdevice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 18 +++++++++---------
 drivers/media/platform/rcar-vin/rcar-dma.c  | 11 ++++++-----
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  2 +-
 drivers/media/platform/rcar-vin/rcar-vin.h  |  9 ++++-----
 4 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index cb761057459caa3f..fa76f494ec0c4bd2 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -100,10 +100,10 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
 	vin->digital->sink_pad = ret < 0 ? 0 : ret;
 
 	/* Find compatible subdevices mbus format */
-	vin->digital->code = 0;
+	vin->code = 0;
 	code.index = 0;
 	code.pad = vin->digital->source_pad;
-	while (!vin->digital->code &&
+	while (!vin->code &&
 	       !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) {
 		code.index++;
 		switch (code.code) {
@@ -111,16 +111,16 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
 		case MEDIA_BUS_FMT_UYVY8_2X8:
 		case MEDIA_BUS_FMT_UYVY10_2X10:
 		case MEDIA_BUS_FMT_RGB888_1X24:
-			vin->digital->code = code.code;
+			vin->code = code.code;
 			vin_dbg(vin, "Found media bus format for %s: %d\n",
-				subdev->name, vin->digital->code);
+				subdev->name, vin->code);
 			break;
 		default:
 			break;
 		}
 	}
 
-	if (!vin->digital->code) {
+	if (!vin->code) {
 		vin_err(vin, "Unsupported media bus format for %s\n",
 			subdev->name);
 		return -EINVAL;
@@ -186,16 +186,16 @@ static int rvin_digital_parse_v4l2(struct device *dev,
 	if (vep->base.port || vep->base.id)
 		return -ENOTCONN;
 
-	rvge->mbus_cfg.type = vep->bus_type;
+	vin->mbus_cfg.type = vep->bus_type;
 
-	switch (rvge->mbus_cfg.type) {
+	switch (vin->mbus_cfg.type) {
 	case V4L2_MBUS_PARALLEL:
 		vin_dbg(vin, "Found PARALLEL media bus\n");
-		rvge->mbus_cfg.flags = vep->bus.parallel.flags;
+		vin->mbus_cfg.flags = vep->bus.parallel.flags;
 		break;
 	case V4L2_MBUS_BT656:
 		vin_dbg(vin, "Found BT656 media bus\n");
-		rvge->mbus_cfg.flags = 0;
+		vin->mbus_cfg.flags = 0;
 		break;
 	default:
 		vin_err(vin, "Unknown media bus type\n");
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 506d51a13b4f5f40..9362e7dba5e3ba95 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -633,7 +633,7 @@ static int rvin_setup(struct rvin_dev *vin)
 	/*
 	 * Input interface
 	 */
-	switch (vin->digital->code) {
+	switch (vin->code) {
 	case MEDIA_BUS_FMT_YUYV8_1X16:
 		/* BT.601/BT.1358 16bit YCbCr422 */
 		vnmc |= VNMC_INF_YUV16;
@@ -641,7 +641,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		break;
 	case MEDIA_BUS_FMT_UYVY8_2X8:
 		/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+		vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
 			VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
 		input_is_yuv = true;
 		break;
@@ -650,7 +650,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		break;
 	case MEDIA_BUS_FMT_UYVY10_2X10:
 		/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+		vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
 			VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
 		input_is_yuv = true;
 		break;
@@ -662,11 +662,11 @@ static int rvin_setup(struct rvin_dev *vin)
 	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
 
 	/* Hsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
+	if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
 		dmr2 |= VNDMR2_HPS;
 
 	/* Vsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
+	if (!(vin->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
 		dmr2 |= VNDMR2_VPS;
 
 	/*
@@ -875,6 +875,7 @@ static void rvin_capture_stop(struct rvin_dev *vin)
 	rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG);
 }
 
+
 /* -----------------------------------------------------------------------------
  * DMA Functions
  */
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index b4e96e18ab845f8b..f7e04601007edb64 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -161,7 +161,7 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 
 	sd = vin_to_source(vin);
 
-	v4l2_fill_mbus_format(&format.format, pix, vin->digital->code);
+	v4l2_fill_mbus_format(&format.format, pix, vin->code);
 
 	pad_cfg = v4l2_subdev_alloc_pad_config(sd);
 	if (pad_cfg == NULL)
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index b97391c414d01bb0..4bd9223be1ee6b6a 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -62,8 +62,6 @@ struct rvin_video_format {
  * struct rvin_graph_entity - Video endpoint from async framework
  * @asd:	sub-device descriptor for async framework
  * @subdev:	subdevice matched using async framework
- * @code:	Media bus format from source
- * @mbus_cfg:	Media bus format from DT
  * @source_pad:	source pad of remote subdevice
  * @sink_pad:	sink pad of remote subdevice
  */
@@ -71,9 +69,6 @@ struct rvin_graph_entity {
 	struct v4l2_async_subdev asd;
 	struct v4l2_subdev *subdev;
 
-	u32 code;
-	struct v4l2_mbus_config mbus_cfg;
-
 	unsigned int source_pad;
 	unsigned int sink_pad;
 };
@@ -115,6 +110,8 @@ struct rvin_info {
  * @sequence:		V4L2 buffers sequence number
  * @state:		keeps track of operation state
  *
+ * @mbus_cfg:		media bus format from DT
+ * @code:		media bus coide from subdevice
  * @format:		active V4L2 pixel format
  *
  * @crop:		active cropping
@@ -141,6 +138,8 @@ struct rvin_dev {
 	unsigned int sequence;
 	enum rvin_dma_state state;
 
+	struct v4l2_mbus_config mbus_cfg;
+	u32 code;
 	struct v4l2_pix_format format;
 
 	struct v4l2_rect crop;
-- 
2.15.0




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux