Re: usb/media/dtt200u: use-after-free in __dvb_frontend_free

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 7, 2017 at 11:31 AM, Mauro Carvalho Chehab
<mchehab@xxxxxxxxxxxxxxxx> wrote:
> Em Mon, 23 Oct 2017 20:58:09 +0200
> Matthias Schwarzott <zzam@xxxxxxxxxx> escreveu:
>
>> Am 23.10.2017 um 16:41 schrieb Andrey Konovalov:
>> > Hi!
>> >
>> > I've got the following report while fuzzing the kernel with syzkaller.
>> >
>> > On commit 3e0cc09a3a2c40ec1ffb6b4e12da86e98feccb11 (4.14-rc5+).
>> >
>> > dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)'
>> > in warm state.
>> > dvb-usb: bulk message failed: -22 (2/1102416563)
>> > dvb-usb: will use the device's hardware PID filter (table count: 15).
>> > dvbdev: DVB: registering new adapter (WideView WT-220U PenType
>> > Receiver (based on ZL353))
>> > usb 1-1: media controller created
>> > dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
>> > usb 1-1: DVB: registering adapter 0 frontend 0 (WideView USB DVB-T)...
>> > dvbdev: dvb_create_media_entity: media entity 'WideView USB DVB-T' registered.
>> > Registered IR keymap rc-dtt200u
>> > rc rc1: IR-receiver inside an USB DVB receiver as
>> > /devices/platform/dummy_hcd.0/usb1/1-1/rc/rc1
>> > input: IR-receiver inside an USB DVB receiver as
>> > /devices/platform/dummy_hcd.0/usb1/1-1/rc/rc1/input9
>> > dvb-usb: schedule remote query interval to 300 msecs.
>> > dvb-usb: WideView WT-220U PenType Receiver (based on ZL353)
>> > successfully initialized and connected.
>> > dvb-usb: bulk message failed: -22 (1/1807119384)
>> > dvb-usb: error -22 while querying for an remote control event.
>> > dvb-usb: bulk message failed: -22 (1/1807119384)
>> > dvb-usb: error -22 while querying for an remote control event.
>> > dvb-usb: bulk message failed: -22 (1/1807119384)
>> > dvb-usb: error -22 while querying for an remote control event.
>> > dvb-usb: bulk message failed: -22 (1/1807119384)
>> > dvb-usb: error -22 while querying for an remote control event.
>> > dvb-usb: bulk message failed: -22 (1/1807119384)
>> > dvb-usb: error -22 while querying for an remote control event.
>> > dvb-usb: bulk message failed: -22 (1/1807119384)
>> > dvb-usb: error -22 while querying for an remote control event.
>> > usb 1-1: USB disconnect, device number 2
>> > ==================================================================
>> > BUG: KASAN: use-after-free in __dvb_frontend_free+0x113/0x120
>> > Write of size 8 at addr ffff880067d45a00 by task kworker/0:1/24
>> >
>> > CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc5-43687-g06ab8a23e0e6 #545
>> > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
>> > Workqueue: usb_hub_wq hub_event
>> > Call Trace:
>> >  __dump_stack lib/dump_stack.c:16
>> >  dump_stack+0x292/0x395 lib/dump_stack.c:52
>> >  print_address_description+0x78/0x280 mm/kasan/report.c:252
>> >  kasan_report_error mm/kasan/report.c:351
>> >  kasan_report+0x23d/0x350 mm/kasan/report.c:409
>> >  __asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435
>> >  __dvb_frontend_free+0x113/0x120 drivers/media/dvb-core/dvb_frontend.c:156
>> >  dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176
>> >  dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803
>> >  dvb_usb_adapter_frontend_exit+0xd6/0x160
>> > drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340
>> >  dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116
>> >  dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132
>> >  dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295
>> >  usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
>> >  __device_release_driver drivers/base/dd.c:861
>> >  device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893
>> >  device_release_driver+0x1e/0x30 drivers/base/dd.c:918
>> >  bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
>> >  device_del+0x5c4/0xab0 drivers/base/core.c:1985
>> >  usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
>> >  usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
>> >  hub_port_connect drivers/usb/core/hub.c:4754
>> >  hub_port_connect_change drivers/usb/core/hub.c:5009
>> >  port_event drivers/usb/core/hub.c:5115
>> >  hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
>> >  process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
>> >  worker_thread+0x221/0x1850 kernel/workqueue.c:2253
>> >  kthread+0x363/0x440 kernel/kthread.c:231
>> >  ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
>> >
>> It looks like this is caused by commit
>> ead666000a5fe34bdc82d61838e4df2d416ea15e ("media: dvb_frontend: only use
>> kref after initialized").
>>
>> The writing to "fe->frontend_priv" in dvb_frontend.c:156 is a
>> use-after-free in case the object dvb_frontend *fe is already freed by
>> the release callback called in line 153.
>> Only if the demod driver is based on new style i2c_client the memory is
>> still accessible.
>>
>> There are two possible solutions:
>> 1. Clear fe->frontend_priv earlier (before line 153).
>> 2. Do not clear fe->frontend_priv
>>
>> Can you try if the following patch (solution 1) fixes the issue?

Hi Mauro,

This patch also fixes the issue.

Thanks!

Tested-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>

>
> The problem with (1) is that drivers may need to use frontend_priv
> on their own release callbacks.
>
> So, I don't think this is the right fix.
>
> I guess option (2) is the best one here.
>
> Andrey,
>
> Could you please test the enclosed patch?
>
> Thanks!
> Mauro
>
> dvb_frontend: don't use-after-free the frontend struct
>
> dvb_frontend_invoke_release() may free the frontend struct.
> So, we can't update it anymore after calling it.
> That's OK, as __dvb_frontend_free() is called only when the
> krefs are zeroed, so nobody is using it anymore.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
>
>
> diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
> index daaf969719e4..80191a15cd89 100644
> --- a/drivers/media/dvb-core/dvb_frontend.c
> +++ b/drivers/media/dvb-core/dvb_frontend.c
> @@ -153,7 +153,6 @@ static void __dvb_frontend_free(struct dvb_frontend *fe)
>         dvb_frontend_invoke_release(fe, fe->ops.release);
>
>         kfree(fepriv);
> -       fe->frontend_priv = NULL;
>  }
>
>  static void dvb_frontend_free(struct kref *ref)
>
>
> Thanks,
> Mauro



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux