Hi Sakari,
Thank you for the patch.
On Friday, 8 September 2017 16:51:40 EET Sakari Ailus wrote:
> Remove the V4L2 AS3645A sub-device driver in favour of the LED flash class
> driver for the same hardware, drivers/leds/leds-as3645a.c. The latter uses
> the V4L2 flash LED class framework to provide V4L2 sub-device interface.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> MAINTAINERS | 8 -
> drivers/media/i2c/Kconfig | 8 -
> drivers/media/i2c/Makefile | 1 -
> drivers/media/i2c/as3645a.c | 880
> -------------------------------------------- include/media/i2c/as3645a.h |
> 66 ----
> 5 files changed, 963 deletions(-)
> delete mode 100644 drivers/media/i2c/as3645a.c
> delete mode 100644 include/media/i2c/as3645a.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index eb930ebecfcb..40964ab8cbbd 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2129,14 +2129,6 @@ L: linux-leds@xxxxxxxxxxxxxxx
> S: Maintained
> F: drivers/leds/leds-as3645a.c
>
> -AS3645A LED FLASH CONTROLLER DRIVER
> -M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> -L: linux-media@xxxxxxxxxxxxxxx
> -T: git git://linuxtv.org/media_tree.git
> -S: Maintained
> -F: drivers/media/i2c/as3645a.c
> -F: include/media/i2c/as3645a.h
> -
> ASAHI KASEI AK8974 DRIVER
> M: Linus Walleij <linus.walleij@xxxxxxxxxx>
> L: linux-iio@xxxxxxxxxxxxxxx
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 94153895fcd4..559ee95a47cf 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -796,14 +796,6 @@ config VIDEO_ADP1653
> This is a driver for the ADP1653 flash controller. It is used for
> example in Nokia N900.
>
> -config VIDEO_AS3645A
> - tristate "AS3645A flash driver support"
> - depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
> - depends on MEDIA_CAMERA_SUPPORT
> - ---help---
> - This is a driver for the AS3645A and LM3555 flash controllers. It has
> - build in control for flash, torch and indicator LEDs.
> -
> config VIDEO_LM3560
> tristate "LM3560 dual flash driver support"
> depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index c843c181dfb9..e88cdb20eb72 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -83,7 +83,6 @@ obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o
> obj-$(CONFIG_VIDEO_S5K5BAF) += s5k5baf.o
> obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/
> obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
> -obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o
> obj-$(CONFIG_VIDEO_LM3560) += lm3560.o
> obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
> obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o
> diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c
> deleted file mode 100644
> index af5db71a0888..000000000000
> --- a/drivers/media/i2c/as3645a.c
> +++ /dev/null
> @@ -1,880 +0,0 @@
> -/*
> - * drivers/media/i2c/as3645a.c - AS3645A and LM3555 flash controllers
> driver - *
> - * Copyright (C) 2008-2011 Nokia Corporation
> - * Copyright (c) 2011, Intel Corporation.
> - *
> - * Contact: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> - * General Public License for more details.
> - *
> - * TODO:
> - * - Check hardware FSTROBE control when sensor driver add support for this
> - *
> - */
> -
> -#include <linux/delay.h>
> -#include <linux/i2c.h>
> -#include <linux/module.h>
> -#include <linux/mutex.h>
> -#include <linux/slab.h>
> -
> -#include <media/i2c/as3645a.h>
> -#include <media/v4l2-ctrls.h>
> -#include <media/v4l2-device.h>
> -
> -#define AS_TIMER_MS_TO_CODE(t) (((t) - 100) / 50)
> -#define AS_TIMER_CODE_TO_MS(c) (50 * (c) + 100)
> -
> -/* Register definitions */
> -
> -/* Read-only Design info register: Reset state: xxxx 0001 */
> -#define AS_DESIGN_INFO_REG 0x00
> -#define AS_DESIGN_INFO_FACTORY(x) (((x) >> 4))
> -#define AS_DESIGN_INFO_MODEL(x) ((x) & 0x0f)
> -
> -/* Read-only Version control register: Reset state: 0000 0000
> - * for first engineering samples
> - */
> -#define AS_VERSION_CONTROL_REG 0x01
> -#define AS_VERSION_CONTROL_RFU(x) (((x) >> 4))
> -#define AS_VERSION_CONTROL_VERSION(x) ((x) & 0x0f)
> -
> -/* Read / Write (Indicator and timer register): Reset state: 0000 1111 */
> -#define AS_INDICATOR_AND_TIMER_REG 0x02
> -#define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT 0
> -#define AS_INDICATOR_AND_TIMER_VREF_SHIFT 4
> -#define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT 6
> -
> -/* Read / Write (Current set register): Reset state: 0110 1001 */
> -#define AS_CURRENT_SET_REG 0x03
> -#define AS_CURRENT_ASSIST_LIGHT_SHIFT 0
> -#define AS_CURRENT_LED_DET_ON (1 << 3)
> -#define AS_CURRENT_FLASH_CURRENT_SHIFT 4
> -
> -/* Read / Write (Control register): Reset state: 1011 0100 */
> -#define AS_CONTROL_REG 0x04
> -#define AS_CONTROL_MODE_SETTING_SHIFT 0
> -#define AS_CONTROL_STROBE_ON (1 << 2)
> -#define AS_CONTROL_OUT_ON (1 << 3)
> -#define AS_CONTROL_EXT_TORCH_ON (1 << 4)
> -#define AS_CONTROL_STROBE_TYPE_EDGE (0 << 5)
> -#define AS_CONTROL_STROBE_TYPE_LEVEL (1 << 5)
> -#define AS_CONTROL_COIL_PEAK_SHIFT 6
> -
> -/* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000
> */ -#define AS_FAULT_INFO_REG 0x05
> -#define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT (1 << 1)
> -#define AS_FAULT_INFO_INDICATOR_LED (1 << 2)
> -#define AS_FAULT_INFO_LED_AMOUNT (1 << 3)
> -#define AS_FAULT_INFO_TIMEOUT (1 << 4)
> -#define AS_FAULT_INFO_OVER_TEMPERATURE (1 << 5)
> -#define AS_FAULT_INFO_SHORT_CIRCUIT (1 << 6)
> -#define AS_FAULT_INFO_OVER_VOLTAGE (1 << 7)
> -
> -/* Boost register */
> -#define AS_BOOST_REG 0x0d
> -#define AS_BOOST_CURRENT_DISABLE (0 << 0)
> -#define AS_BOOST_CURRENT_ENABLE (1 << 0)
> -
> -/* Password register is used to unlock boost register writing */
> -#define AS_PASSWORD_REG 0x0f
> -#define AS_PASSWORD_UNLOCK_VALUE 0x55
> -
> -enum as_mode {
> - AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT,
> - AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT,
> - AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT,
> - AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT,
> -};
> -
> -/*
> - * struct as3645a
> - *
> - * @subdev: V4L2 subdev
> - * @pdata: Flash platform data
> - * @power_lock: Protects power_count
> - * @power_count: Power reference count
> - * @led_mode: V4L2 flash LED mode
> - * @timeout: Flash timeout in microseconds
> - * @flash_current: Flash current (0=200mA ... 15=500mA). Maximum
> - * values are 400mA for two LEDs and 500mA for one LED.
> - * @assist_current: Torch/Assist light current (0=20mA, 1=40mA ...
7=160mA)
> - * @indicator_current: Indicator LED current (0=0mA, 1=2.5mA ... 4=10mA) -
> * @strobe_source: Flash strobe source (software or external)
> - */
> -struct as3645a {
> - struct v4l2_subdev subdev;
> - const struct as3645a_platform_data *pdata;
> -
> - struct mutex power_lock;
> - int power_count;
> -
> - /* Controls */
> - struct v4l2_ctrl_handler ctrls;
> -
> - enum v4l2_flash_led_mode led_mode;
> - unsigned int timeout;
> - u8 flash_current;
> - u8 assist_current;
> - u8 indicator_current;
> - enum v4l2_flash_strobe_source strobe_source;
> -};
> -
> -#define to_as3645a(sd) container_of(sd, struct as3645a, subdev)
> -
> -/* Return negative errno else zero on success */
> -static int as3645a_write(struct as3645a *flash, u8 addr, u8 val)
> -{
> - struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
> - int rval;
> -
> - rval = i2c_smbus_write_byte_data(client, addr, val);
> -
> - dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val,
> - rval < 0 ? "fail" : "ok");
> -
> - return rval;
> -}
> -
> -/* Return negative errno else a data byte received from the device. */
> -static int as3645a_read(struct as3645a *flash, u8 addr)
> -{
> - struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
> - int rval;
> -
> - rval = i2c_smbus_read_byte_data(client, addr);
> -
> - dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval,
> - rval < 0 ? "fail" : "ok");
> -
> - return rval;
> -}
> -
> -/*
> ---------------------------------------------------------------------------
> -- - * Hardware configuration and trigger
> - */
> -
> -/*
> - * as3645a_set_config - Set flash configuration registers
> - * @flash: The flash
> - *
> - * Configure the hardware with flash, assist and indicator currents, as
> well as - * flash timeout.
> - *
> - * Return 0 on success, or a negative error code if an I2C communication
> error - * occurred.
> - */
> -static int as3645a_set_config(struct as3645a *flash)
> -{
> - int ret;
> - u8 val;
> -
> - val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT)
> - | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT)
> - | AS_CURRENT_LED_DET_ON;
> -
> - ret = as3645a_write(flash, AS_CURRENT_SET_REG, val);
> - if (ret < 0)
> - return ret;
> -
> - val = AS_TIMER_MS_TO_CODE(flash->timeout / 1000)
> - << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT;
> -
> - val |= (flash->pdata->vref << AS_INDICATOR_AND_TIMER_VREF_SHIFT)
> - | ((flash->indicator_current ? flash->indicator_current - 1 : 0)
> - << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT);
> -
> - return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val);
> -}
> -
> -/*
> - * as3645a_set_control - Set flash control register
> - * @flash: The flash
> - * @mode: Desired output mode
> - * @on: Desired output state
> - *
> - * Configure the hardware with output mode and state.
> - *
> - * Return 0 on success, or a negative error code if an I2C communication
> error - * occurred.
> - */
> -static int
> -as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on)
> -{
> - u8 reg;
> -
> - /* Configure output parameters and operation mode. */
> - reg = (flash->pdata->peak << AS_CONTROL_COIL_PEAK_SHIFT)
> - | (on ? AS_CONTROL_OUT_ON : 0)
> - | mode;
> -
> - if (flash->led_mode == V4L2_FLASH_LED_MODE_FLASH &&
> - flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) {
> - reg |= AS_CONTROL_STROBE_TYPE_LEVEL
> - | AS_CONTROL_STROBE_ON;
> - }
> -
> - return as3645a_write(flash, AS_CONTROL_REG, reg);
> -}
> -
> -/*
> - * as3645a_set_output - Configure output and operation mode
> - * @flash: Flash controller
> - * @strobe: Strobe the flash (only valid in flash mode)
> - *
> - * Turn the LEDs output on/off and set the operation mode based on the
> current - * parameters.
> - *
> - * The AS3645A can't control the indicator LED independently of the
> flash/torch - * LED. If the flash controller is in V4L2_FLASH_LED_MODE_NONE
> mode, set the - * chip to indicator mode. Otherwise set it to assist light
> (torch) or flash - * mode.
> - *
> - * In indicator and assist modes, turn the output on/off based on the
> indicator - * and torch currents. In software strobe flash mode, turn the
> output on/off - * based on the strobe parameter.
> - */
> -static int as3645a_set_output(struct as3645a *flash, bool strobe)
> -{
> - enum as_mode mode;
> - bool on;
> -
> - switch (flash->led_mode) {
> - case V4L2_FLASH_LED_MODE_NONE:
> - on = flash->indicator_current != 0;
> - mode = AS_MODE_INDICATOR;
> - break;
> - case V4L2_FLASH_LED_MODE_TORCH:
> - on = true;
> - mode = AS_MODE_ASSIST;
> - break;
> - case V4L2_FLASH_LED_MODE_FLASH:
> - on = strobe;
> - mode = AS_MODE_FLASH;
> - break;
> - default:
> - BUG();
> - }
> -
> - /* Configure output parameters and operation mode. */
> - return as3645a_set_control(flash, mode, on);
> -}
> -
> -/*
> ---------------------------------------------------------------------------
> -- - * V4L2 controls
> - */
> -
> -static int as3645a_is_active(struct as3645a *flash)
> -{
> - int ret;
> -
> - ret = as3645a_read(flash, AS_CONTROL_REG);
> - return ret < 0 ? ret : !!(ret & AS_CONTROL_OUT_ON);
> -}
> -
> -static int as3645a_read_fault(struct as3645a *flash)
> -{
> - struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
> - int rval;
> -
> - /* NOTE: reading register clear fault status */
> - rval = as3645a_read(flash, AS_FAULT_INFO_REG);
> - if (rval < 0)
> - return rval;
> -
> - if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT)
> - dev_dbg(&client->dev, "Inductor Peak limit fault\n");
> -
> - if (rval & AS_FAULT_INFO_INDICATOR_LED)
> - dev_dbg(&client->dev,
> - "Indicator LED fault: Short circuit or open loop\n");
> -
> - dev_dbg(&client->dev, "%u connected LEDs\n",
> - rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1);
> -
> - if (rval & AS_FAULT_INFO_TIMEOUT)
> - dev_dbg(&client->dev, "Timeout fault\n");
> -
> - if (rval & AS_FAULT_INFO_OVER_TEMPERATURE)
> - dev_dbg(&client->dev, "Over temperature fault\n");
> -
> - if (rval & AS_FAULT_INFO_SHORT_CIRCUIT)
> - dev_dbg(&client->dev, "Short circuit fault\n");
> -
> - if (rval & AS_FAULT_INFO_OVER_VOLTAGE)
> - dev_dbg(&client->dev,
> - "Over voltage fault: Indicates missing capacitor or open connection
\n");
> -
> - return rval;
> -}
> -
> -static int as3645a_get_ctrl(struct v4l2_ctrl *ctrl)
> -{
> - struct as3645a *flash =
> - container_of(ctrl->handler, struct as3645a, ctrls);
> - struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
> - int value;
> -
> - switch (ctrl->id) {
> - case V4L2_CID_FLASH_FAULT:
> - value = as3645a_read_fault(flash);
> - if (value < 0)
> - return value;
> -
> - ctrl->cur.val = 0;
> - if (value & AS_FAULT_INFO_SHORT_CIRCUIT)
> - ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
> - if (value & AS_FAULT_INFO_OVER_TEMPERATURE)
> - ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
> - if (value & AS_FAULT_INFO_TIMEOUT)
> - ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
> - if (value & AS_FAULT_INFO_OVER_VOLTAGE)
> - ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
> - if (value & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT)
> - ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_CURRENT;
> - if (value & AS_FAULT_INFO_INDICATOR_LED)
> - ctrl->cur.val |= V4L2_FLASH_FAULT_INDICATOR;
> - break;
> -
> - case V4L2_CID_FLASH_STROBE_STATUS:
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
> - ctrl->cur.val = 0;
> - break;
> - }
> -
> - value = as3645a_is_active(flash);
> - if (value < 0)
> - return value;
> -
> - ctrl->cur.val = value;
> - break;
> - }
> -
> - dev_dbg(&client->dev, "G_CTRL %08x:%d\n", ctrl->id, ctrl->cur.val);
> -
> - return 0;
> -}
> -
> -static int as3645a_set_ctrl(struct v4l2_ctrl *ctrl)
> -{
> - struct as3645a *flash =
> - container_of(ctrl->handler, struct as3645a, ctrls);
> - struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
> - int ret;
> -
> - dev_dbg(&client->dev, "S_CTRL %08x:%d\n", ctrl->id, ctrl->val);
> -
> - /* If a control that doesn't apply to the current mode is modified,
> - * we store the value and return immediately. The setting will be
> - * applied when the LED mode is changed. Otherwise we apply the setting
> - * immediately.
> - */
> -
> - switch (ctrl->id) {
> - case V4L2_CID_FLASH_LED_MODE:
> - if (flash->indicator_current)
> - return -EBUSY;
> -
> - ret = as3645a_set_config(flash);
> - if (ret < 0)
> - return ret;
> -
> - flash->led_mode = ctrl->val;
> - return as3645a_set_output(flash, false);
> -
> - case V4L2_CID_FLASH_STROBE_SOURCE:
> - flash->strobe_source = ctrl->val;
> -
> - /* Applies to flash mode only. */
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> - break;
> -
> - return as3645a_set_output(flash, false);
> -
> - case V4L2_CID_FLASH_STROBE:
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> - return -EBUSY;
> -
> - return as3645a_set_output(flash, true);
> -
> - case V4L2_CID_FLASH_STROBE_STOP:
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> - return -EBUSY;
> -
> - return as3645a_set_output(flash, false);
> -
> - case V4L2_CID_FLASH_TIMEOUT:
> - flash->timeout = ctrl->val;
> -
> - /* Applies to flash mode only. */
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> - break;
> -
> - return as3645a_set_config(flash);
> -
> - case V4L2_CID_FLASH_INTENSITY:
> - flash->flash_current = (ctrl->val - AS3645A_FLASH_INTENSITY_MIN)
> - / AS3645A_FLASH_INTENSITY_STEP;
> -
> - /* Applies to flash mode only. */
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> - break;
> -
> - return as3645a_set_config(flash);
> -
> - case V4L2_CID_FLASH_TORCH_INTENSITY:
> - flash->assist_current =
> - (ctrl->val - AS3645A_TORCH_INTENSITY_MIN)
> - / AS3645A_TORCH_INTENSITY_STEP;
> -
> - /* Applies to torch mode only. */
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_TORCH)
> - break;
> -
> - return as3645a_set_config(flash);
> -
> - case V4L2_CID_FLASH_INDICATOR_INTENSITY:
> - if (flash->led_mode != V4L2_FLASH_LED_MODE_NONE)
> - return -EBUSY;
> -
> - flash->indicator_current =
> - (ctrl->val - AS3645A_INDICATOR_INTENSITY_MIN)
> - / AS3645A_INDICATOR_INTENSITY_STEP;
> -
> - ret = as3645a_set_config(flash);
> - if (ret < 0)
> - return ret;
> -
> - if ((ctrl->val == 0) == (ctrl->cur.val == 0))
> - break;
> -
> - return as3645a_set_output(flash, false);
> - }
> -
> - return 0;
> -}
> -
> -static const struct v4l2_ctrl_ops as3645a_ctrl_ops = {
> - .g_volatile_ctrl = as3645a_get_ctrl,
> - .s_ctrl = as3645a_set_ctrl,
> -};
> -
> -/*
> ---------------------------------------------------------------------------
> -- - * V4L2 subdev core operations
> - */
> -
> -/* Put device into know state. */
> -static int as3645a_setup(struct as3645a *flash)
> -{
> - struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
> - int ret;
> -
> - /* clear errors */
> - ret = as3645a_read(flash, AS_FAULT_INFO_REG);
> - if (ret < 0)
> - return ret;
> -
> - dev_dbg(&client->dev, "Fault info: %02x\n", ret);
> -
> - ret = as3645a_set_config(flash);
> - if (ret < 0)
> - return ret;
> -
> - ret = as3645a_set_output(flash, false);
> - if (ret < 0)
> - return ret;
> -
> - /* read status */
> - ret = as3645a_read_fault(flash);
> - if (ret < 0)
> - return ret;
> -
> - dev_dbg(&client->dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n",
> - as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG));
> - dev_dbg(&client->dev, "AS_CURRENT_SET_REG: %02x\n",
> - as3645a_read(flash, AS_CURRENT_SET_REG));
> - dev_dbg(&client->dev, "AS_CONTROL_REG: %02x\n",
> - as3645a_read(flash, AS_CONTROL_REG));
> -
> - return ret & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0;
> -}
> -
> -static int __as3645a_set_power(struct as3645a *flash, int on)
> -{
> - int ret;
> -
> - if (!on)
> - as3645a_set_control(flash, AS_MODE_EXT_TORCH, false);
> -
> - if (flash->pdata->set_power) {
> - ret = flash->pdata->set_power(&flash->subdev, on);
> - if (ret < 0)
> - return ret;
> - }
> -
> - if (!on)
> - return 0;
> -
> - ret = as3645a_setup(flash);
> - if (ret < 0) {
> - if (flash->pdata->set_power)
> - flash->pdata->set_power(&flash->subdev, 0);
> - }
> -
> - return ret;
> -}
> -
> -static int as3645a_set_power(struct v4l2_subdev *sd, int on)
> -{
> - struct as3645a *flash = to_as3645a(sd);
> - int ret = 0;
> -
> - mutex_lock(&flash->power_lock);
> -
> - if (flash->power_count == !on) {
> - ret = __as3645a_set_power(flash, !!on);
> - if (ret < 0)
> - goto done;
> - }
> -
> - flash->power_count += on ? 1 : -1;
> - WARN_ON(flash->power_count < 0);
> -
> -done:
> - mutex_unlock(&flash->power_lock);
> - return ret;
> -}
> -
> -static int as3645a_registered(struct v4l2_subdev *sd)
> -{
> - struct as3645a *flash = to_as3645a(sd);
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> - int rval, man, model, rfu, version;
> - const char *vendor;
> -
> - /* Power up the flash driver and read manufacturer ID, model ID, RFU
> - * and version.
> - */
> - rval = as3645a_set_power(&flash->subdev, 1);
> - if (rval < 0)
> - return rval;
> -
> - rval = as3645a_read(flash, AS_DESIGN_INFO_REG);
> - if (rval < 0)
> - goto power_off;
> -
> - man = AS_DESIGN_INFO_FACTORY(rval);
> - model = AS_DESIGN_INFO_MODEL(rval);
> -
> - rval = as3645a_read(flash, AS_VERSION_CONTROL_REG);
> - if (rval < 0)
> - goto power_off;
> -
> - rfu = AS_VERSION_CONTROL_RFU(rval);
> - version = AS_VERSION_CONTROL_VERSION(rval);
> -
> - /* Verify the chip model and version. */
> - if (model != 0x01 || rfu != 0x00) {
> - dev_err(&client->dev,
> - "AS3645A not detected (model %d rfu %d)\n", model, rfu);
> - rval = -ENODEV;
> - goto power_off;
> - }
> -
> - switch (man) {
> - case 1:
> - vendor = "AMS, Austria Micro Systems";
> - break;
> - case 2:
> - vendor = "ADI, Analog Devices Inc.";
> - break;
> - case 3:
> - vendor = "NSC, National Semiconductor";
> - break;
> - case 4:
> - vendor = "NXP";
> - break;
> - case 5:
> - vendor = "TI, Texas Instrument";
> - break;
> - default:
> - vendor = "Unknown";
> - }
> -
> - dev_info(&client->dev, "Chip vendor: %s (%d) Version: %d\n", vendor,
> - man, version);
> -
> - rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE);
> - if (rval < 0)
> - goto power_off;
> -
> - rval = as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE);
> - if (rval < 0)
> - goto power_off;
> -
> - /* Setup default values. This makes sure that the chip is in a known
> - * state, in case the power rail can't be controlled.
> - */
> - rval = as3645a_setup(flash);
> -
> -power_off:
> - as3645a_set_power(&flash->subdev, 0);
> -
> - return rval;
> -}
> -
> -static int as3645a_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> -{
> - return as3645a_set_power(sd, 1);
> -}
> -
> -static int as3645a_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> -{
> - return as3645a_set_power(sd, 0);
> -}
> -
> -static const struct v4l2_subdev_core_ops as3645a_core_ops = {
> - .s_power = as3645a_set_power,
> -};
> -
> -static const struct v4l2_subdev_ops as3645a_ops = {
> - .core = &as3645a_core_ops,
> -};
> -
> -static const struct v4l2_subdev_internal_ops as3645a_internal_ops = {
> - .registered = as3645a_registered,
> - .open = as3645a_open,
> - .close = as3645a_close,
> -};
> -
> -/*
> ---------------------------------------------------------------------------
> -- - * I2C driver
> - */
> -#ifdef CONFIG_PM
> -
> -static int as3645a_suspend(struct device *dev)
> -{
> - struct i2c_client *client = to_i2c_client(dev);
> - struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> - struct as3645a *flash = to_as3645a(subdev);
> - int rval;
> -
> - if (flash->power_count == 0)
> - return 0;
> -
> - rval = __as3645a_set_power(flash, 0);
> -
> - dev_dbg(&client->dev, "Suspend %s\n", rval < 0 ? "failed" : "ok");
> -
> - return rval;
> -}
> -
> -static int as3645a_resume(struct device *dev)
> -{
> - struct i2c_client *client = to_i2c_client(dev);
> - struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> - struct as3645a *flash = to_as3645a(subdev);
> - int rval;
> -
> - if (flash->power_count == 0)
> - return 0;
> -
> - rval = __as3645a_set_power(flash, 1);
> -
> - dev_dbg(&client->dev, "Resume %s\n", rval < 0 ? "fail" : "ok");
> -
> - return rval;
> -}
> -
> -#else
> -
> -#define as3645a_suspend NULL
> -#define as3645a_resume NULL
> -
> -#endif /* CONFIG_PM */
> -
> -/*
> - * as3645a_init_controls - Create controls
> - * @flash: The flash
> - *
> - * The number of LEDs reported in platform data is used to compute default
> - * limits. Parameters passed through platform data can override those
> limits. - */
> -static int as3645a_init_controls(struct as3645a *flash)
> -{
> - const struct as3645a_platform_data *pdata = flash->pdata;
> - struct v4l2_ctrl *ctrl;
> - int maximum;
> -
> - v4l2_ctrl_handler_init(&flash->ctrls, 10);
> -
> - /* V4L2_CID_FLASH_LED_MODE */
> - v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_LED_MODE, 2, ~7,
> - V4L2_FLASH_LED_MODE_NONE);
> -
> - /* V4L2_CID_FLASH_STROBE_SOURCE */
> - v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_STROBE_SOURCE,
> - pdata->ext_strobe ? 1 : 0,
> - pdata->ext_strobe ? ~3 : ~1,
> - V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
> -
> - flash->strobe_source = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
> -
> - /* V4L2_CID_FLASH_STROBE */
> - v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
> -
> - /* V4L2_CID_FLASH_STROBE_STOP */
> - v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
> -
> - /* V4L2_CID_FLASH_STROBE_STATUS */
> - ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_STROBE_STATUS, 0, 1, 1, 1);
> - if (ctrl != NULL)
> - ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
> -
> - /* V4L2_CID_FLASH_TIMEOUT */
> - maximum = pdata->timeout_max;
> -
> - v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_TIMEOUT, AS3645A_FLASH_TIMEOUT_MIN,
> - maximum, AS3645A_FLASH_TIMEOUT_STEP, maximum);
> -
> - flash->timeout = maximum;
> -
> - /* V4L2_CID_FLASH_INTENSITY */
> - maximum = pdata->flash_max_current;
> -
> - v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_INTENSITY, AS3645A_FLASH_INTENSITY_MIN,
> - maximum, AS3645A_FLASH_INTENSITY_STEP, maximum);
> -
> - flash->flash_current = (maximum - AS3645A_FLASH_INTENSITY_MIN)
> - / AS3645A_FLASH_INTENSITY_STEP;
> -
> - /* V4L2_CID_FLASH_TORCH_INTENSITY */
> - maximum = pdata->torch_max_current;
> -
> - v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_TORCH_INTENSITY,
> - AS3645A_TORCH_INTENSITY_MIN, maximum,
> - AS3645A_TORCH_INTENSITY_STEP,
> - AS3645A_TORCH_INTENSITY_MIN);
> -
> - flash->assist_current = 0;
> -
> - /* V4L2_CID_FLASH_INDICATOR_INTENSITY */
> - v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_INDICATOR_INTENSITY,
> - AS3645A_INDICATOR_INTENSITY_MIN,
> - AS3645A_INDICATOR_INTENSITY_MAX,
> - AS3645A_INDICATOR_INTENSITY_STEP,
> - AS3645A_INDICATOR_INTENSITY_MIN);
> -
> - flash->indicator_current = 0;
> -
> - /* V4L2_CID_FLASH_FAULT */
> - ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
> - V4L2_CID_FLASH_FAULT, 0,
> - V4L2_FLASH_FAULT_OVER_VOLTAGE |
> - V4L2_FLASH_FAULT_TIMEOUT |
> - V4L2_FLASH_FAULT_OVER_TEMPERATURE |
> - V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
> - if (ctrl != NULL)
> - ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
> -
> - flash->subdev.ctrl_handler = &flash->ctrls;
> -
> - return flash->ctrls.error;
> -}
> -
> -static int as3645a_probe(struct i2c_client *client,
> - const struct i2c_device_id *devid)
> -{
> - struct as3645a *flash;
> - int ret;
> -
> - if (client->dev.platform_data == NULL)
> - return -ENODEV;
> -
> - flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
> - if (flash == NULL)
> - return -ENOMEM;
> -
> - flash->pdata = client->dev.platform_data;
> -
> - v4l2_i2c_subdev_init(&flash->subdev, client, &as3645a_ops);
> - flash->subdev.internal_ops = &as3645a_internal_ops;
> - flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> -
> - ret = as3645a_init_controls(flash);
> - if (ret < 0)
> - goto done;
> -
> - ret = media_entity_pads_init(&flash->subdev.entity, 0, NULL);
> - if (ret < 0)
> - goto done;
> -
> - flash->subdev.entity.function = MEDIA_ENT_F_FLASH;
> -
> - mutex_init(&flash->power_lock);
> -
> - flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
> -
> -done:
> - if (ret < 0)
> - v4l2_ctrl_handler_free(&flash->ctrls);
> -
> - return ret;
> -}
> -
> -static int as3645a_remove(struct i2c_client *client)
> -{
> - struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> - struct as3645a *flash = to_as3645a(subdev);
> -
> - v4l2_device_unregister_subdev(subdev);
> - v4l2_ctrl_handler_free(&flash->ctrls);
> - media_entity_cleanup(&flash->subdev.entity);
> - mutex_destroy(&flash->power_lock);
> -
> - return 0;
> -}
> -
> -static const struct i2c_device_id as3645a_id_table[] = {
> - { AS3645A_NAME, 0 },
> - { },
> -};
> -MODULE_DEVICE_TABLE(i2c, as3645a_id_table);
> -
> -static const struct dev_pm_ops as3645a_pm_ops = {
> - .suspend = as3645a_suspend,
> - .resume = as3645a_resume,
> -};
> -
> -static struct i2c_driver as3645a_i2c_driver = {
> - .driver = {
> - .name = AS3645A_NAME,
> - .pm = &as3645a_pm_ops,
> - },
> - .probe = as3645a_probe,
> - .remove = as3645a_remove,
> - .id_table = as3645a_id_table,
> -};
> -
> -module_i2c_driver(as3645a_i2c_driver);
> -
> -MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>");
> -MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their
> clones"); -MODULE_LICENSE("GPL");
> diff --git a/include/media/i2c/as3645a.h b/include/media/i2c/as3645a.h
> deleted file mode 100644
> index fffd4b563f5a..000000000000
> --- a/include/media/i2c/as3645a.h
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -/*
> - * include/media/i2c/as3645a.h
> - *
> - * Copyright (C) 2008-2011 Nokia Corporation
> - *
> - * Contact: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> - * General Public License for more details.
> - *
> - */
> -
> -#ifndef __AS3645A_H__
> -#define __AS3645A_H__
> -
> -#include <media/v4l2-subdev.h>
> -
> -#define AS3645A_NAME "as3645a"
> -#define AS3645A_I2C_ADDR (0x60 >> 1) /* W:0x60, R:0x61 */
> -
> -#define AS3645A_FLASH_TIMEOUT_MIN 100000 /* us */
> -#define AS3645A_FLASH_TIMEOUT_MAX 850000
> -#define AS3645A_FLASH_TIMEOUT_STEP 50000
> -
> -#define AS3645A_FLASH_INTENSITY_MIN 200 /* mA */
> -#define AS3645A_FLASH_INTENSITY_MAX_1LED 500
> -#define AS3645A_FLASH_INTENSITY_MAX_2LEDS 400
> -#define AS3645A_FLASH_INTENSITY_STEP 20
> -
> -#define AS3645A_TORCH_INTENSITY_MIN 20 /* mA */
> -#define AS3645A_TORCH_INTENSITY_MAX 160
> -#define AS3645A_TORCH_INTENSITY_STEP 20
> -
> -#define AS3645A_INDICATOR_INTENSITY_MIN 0 /* uA */
> -#define AS3645A_INDICATOR_INTENSITY_MAX 10000
> -#define AS3645A_INDICATOR_INTENSITY_STEP 2500
> -
> -/*
> - * as3645a_platform_data - Flash controller platform data
> - * @set_power: Set power callback
> - * @vref: VREF offset (0=0V, 1=+0.3V, 2=-0.3V, 3=+0.6V)
> - * @peak: Inductor peak current limit (0=1.25A, 1=1.5A, 2=1.75A, 3=2.0A)
> - * @ext_strobe: True if external flash strobe can be used
> - * @flash_max_current: Max flash current (mA, <=
> AS3645A_FLASH_INTENSITY_MAX) - * @torch_max_current: Max torch current (mA,
> >= AS3645A_TORCH_INTENSITY_MAX) - * @timeout_max: Max flash timeout (us, <=
> AS3645A_FLASH_TIMEOUT_MAX) - */
> -struct as3645a_platform_data {
> - int (*set_power)(struct v4l2_subdev *subdev, int on);
> - unsigned int vref;
> - unsigned int peak;
> - bool ext_strobe;
> -
> - /* Flash and torch currents and timeout limits */
> - unsigned int flash_max_current;
> - unsigned int torch_max_current;
> - unsigned int timeout_max;
> -};
> -
> -#endif /* __AS3645A_H__ */
--
Regards,
Laurent Pinchart
