From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
The vdd10_lcd and vcc18_lcd regulators need to be enabled for HDMI output
to work, so add 'regulator-always-on', just as is done in rk3288-firefly.dtsi.
Also enable i2c5 and the hdmi block.
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 2 ++
arch/arm/boot/dts/rk3288-firefly-reload.dts | 9 +++++++++
2 files changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index 5f05815f47e0..5f1e336dbaac 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -184,6 +184,7 @@
regulator-name = "vdd10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-always-on;
};
vcca_18: REG7 {
@@ -223,6 +224,7 @@
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 7da0947ababb..859938d8832e 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -226,6 +226,11 @@
};
};
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
&i2c0 {
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
@@ -255,6 +260,10 @@
};
};
+&i2c5 {
+ status = "okay";
+};
+
&i2s {
status = "okay";
};
--
2.14.1
