Re: [PATCH] media: vb2: unify calling of set_page_dirty_lock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le mardi 17 octobre 2017 à 13:14 +0300, Sakari Ailus a écrit :
> On Sun, Oct 15, 2017 at 07:09:24PM -0400, Nicolas Dufresne wrote:
> > Le dimanche 15 octobre 2017 à 23:40 +0300, Sakari Ailus a écrit :
> > > Hi Nicolas,
> > > 
> > > On Tue, Oct 10, 2017 at 11:40:10AM -0400, Nicolas Dufresne wrote:
> > > > Le mardi 29 août 2017 à 14:26 +0300, Stanimir Varbanov a écrit :
> > > > > Currently videobuf2-dma-sg checks for dma direction for
> > > > > every single page and videobuf2-dc lacks any dma direction
> > > > > checks and calls set_page_dirty_lock unconditionally.
> > > > > 
> > > > > Thus unify and align the invocations of set_page_dirty_lock
> > > > > for videobuf2-dc, videobuf2-sg  memory allocators with
> > > > > videobuf2-vmalloc, i.e. the pattern used in vmalloc has been
> > > > > copied to dc and dma-sg.
> > > > 
> > > > Just before we go too far in "doing like vmalloc", I would like to
> > > > share this small video that display coherency issues when rendering
> > > > vmalloc backed DMABuf over various KMS/DRM driver. I can reproduce
> > > > this
> > > > easily with Intel and MSM display drivers using UVC or Vivid as
> > > > source.
> > > > 
> > > > The following is an HDMI capture of the following GStreamer
> > > > pipeline
> > > > running on Dragonboard 410c.
> > > > 
> > > >     gst-launch-1.0 -v v4l2src device=/dev/video2 ! video/x-
> > > > raw,format=NV16,width=1280,height=720 ! kmssink
> > > >     https://people.collabora.com/~nicolas/vmalloc-issue.mov
> > > > 
> > > > Feedback on this issue would be more then welcome. It's not clear
> > > > to me
> > > > who's bug is this (v4l2, drm or iommu). The software is unlikely to
> > > > be
> > > > blamed as this same pipeline works fine with non-vmalloc based
> > > > sources.
> > > 
> > > Could you elaborate this a little bit more? Which Intel CPU do you
> > > have
> > > there?
> > 
> > I have tested with Skylake and Ivy Bridge and on Dragonboard 410c
> > (Qualcomm APQ8016 SoC) (same visual artefact)
> 
> I presume kmssink draws on the display. Which GPU did you use?

In order, GPU will be Iris Pro 580, Intel® Ivybridge Mobile and an
Adreno (3x ?). Why does it matter ? I'm pretty sure the GPU is not used
on the DB410c for this use case.

regards,
Nicolas

Attachment: signature.asc
Description: This is a digitally signed message part


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux