Hi, I'm trying to run Pinnacle Systems MovieBox (510-USB) on linux. lsusb gives me: ID 2304:0223 Pinnacle Systems, Inc. DazzleTV Sat BDA Device tried modify kernel like: https://www.linuxtv.org/pipermail/linux-dvb/2007-February/015779.html (there is note about 0223) My changes: $ diff /usr/src/linux/drivers/media/dvb-core/dvb-usb-ids.h dvb-usb-ids.h 307d306 < #define USB_PID_PCTV_510 0x0223 $ diff /usr/src/linux/drivers/media/usb/dvb-usb/ttusb2.c ttusb2.c 638d637 < { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_510) }, 691c690 < .num_device_descs = 3, --- > .num_device_descs = 2, 701,704d699 < { "Pinnacle 510 DVB-S USB2.0", < { &ttusb2_table[2], NULL }, < { NULL }, < }, full dmesg: https://paste.pound-python.org/show/dLUwdNRT04k61TDPM6QP/ relevant parts of dmesg: [ 0.777732] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 0.954800] usb 3-2: New USB device found, idVendor=2304, idProduct=0223 [ 0.954803] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.954804] usb 3-2: Product: Pinnacle High Speed USB Device [ 0.954805] usb 3-2: Manufacturer: Pinnacle Systems, Inc. [ 4.320028] dvb-usb: recv bulk message failed: -110 [ 4.320030] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0) [ 6.368006] dvb-usb: recv bulk message failed: -110 [ 6.368008] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0) [ 6.368051] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 6.368123] dvbdev: DVB: registering new adapter (Pinnacle 510 DVB-S USB2.0) [ 8.416049] dvb-usb: recv bulk message failed: -110 [ 8.416054] ttusb2: there might have been an error during control message transfer. (rlen = 4, was 0) [ 8.416056] ttusb2: i2c transfer failed. [ 8.416066] dvb-usb: no frontend was attached by 'Pinnacle 510 DVB-S USB2.0' [ 10.464023] dvb-usb: recv bulk message failed: -110 [ 10.464027] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0) [ 12.512017] dvb-usb: recv bulk message failed: -110 [ 12.512021] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0) [ 12.512026] dvb-usb: Pinnacle 510 DVB-S USB2.0 successfully initialized and connected. [ 12.512082] usbcore: registered new interface driver dvb_usb_ttusb2 # ls -l /dev/dvb/adapter0/ celkem 0 crw-rw----+ 1 root video 212, 4 16. říj 10.52 demux0 crw-rw----+ 1 root video 212, 5 16. říj 10.52 dvr0 crw-rw----+ 1 root video 212, 7 16. říj 10.52 net0 I don't know why module doesn't ask for firmware. Is there a chance to get it to run? Thanks deim
