On 09/27/17 23:46, Mauro Carvalho Chehab wrote:
> There are several widely macros that aren't documented using kernel-docs
> markups.
>
> Add it.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Regards,
Hans
> ---
> include/media/v4l2-device.h | 238 +++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 204 insertions(+), 34 deletions(-)
>
> diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
> index 8ffa94009d1a..d6d1c4f7d42c 100644
> --- a/include/media/v4l2-device.h
> +++ b/include/media/v4l2-device.h
> @@ -56,7 +56,6 @@ struct v4l2_ctrl_handler;
> * #) @dev->driver_data points to this struct.
> * #) @dev might be %NULL if there is no parent device
> */
> -
> struct v4l2_device {
> struct device *dev;
> #if defined(CONFIG_MEDIA_CONTROLLER)
> @@ -166,7 +165,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev);
> * v4l2_device_register_subdev - Registers a subdev with a v4l2 device.
> *
> * @v4l2_dev: pointer to struct &v4l2_device
> - * @sd: pointer to struct &v4l2_subdev
> + * @sd: pointer to &struct v4l2_subdev
> *
> * While registered, the subdev module is marked as in-use.
> *
> @@ -179,7 +178,7 @@ int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
> /**
> * v4l2_device_unregister_subdev - Unregisters a subdev with a v4l2 device.
> *
> - * @sd: pointer to struct &v4l2_subdev
> + * @sd: pointer to &struct v4l2_subdev
> *
> * .. note ::
> *
> @@ -201,7 +200,7 @@ v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev);
> /**
> * v4l2_subdev_notify - Sends a notification to v4l2_device.
> *
> - * @sd: pointer to struct &v4l2_subdev
> + * @sd: pointer to &struct v4l2_subdev
> * @notification: type of notification. Please notice that the notification
> * type is driver-specific.
> * @arg: arguments for the notification. Those are specific to each
> @@ -214,13 +213,43 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> sd->v4l2_dev->notify(sd, notification, arg);
> }
>
> -/* Iterate over all subdevs. */
> +/* Ancillary macros to iterate over all subdevs. */
> +
> +/**
> + * v4l2_device_for_each_subdev - Ancillary macro that interates over all
> + * sub-devices
> + *
> + * @sd: pointer that will be filled by the macro with all
> + * &struct v4l2_subdev sub-devices associated with @v4l2_dev.
> + * @v4l2_dev: pointer to &struct v4l2_device
> + *
> + * Sometimes, a driver may need to broadcast a command to all subdevices.
> + * This ancillary macro allows interacting to all sub-devices associated
> + * to a device.
> + */
> #define v4l2_device_for_each_subdev(sd, v4l2_dev) \
> list_for_each_entry(sd, &(v4l2_dev)->subdevs, list)
>
> -/* Call the specified callback for all subdevs matching the condition.
> - Ignore any errors. Note that you cannot add or delete a subdev
> - while walking the subdevs list. */
> +/**
> + * __v4l2_device_call_subdevs_p - Calls the specified callback for
> + * all subdevs matching the condition.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @sd: pointer that will be filled by the macro with all
> + * &struct v4l2_subdev sub-devices associated with @v4l2_dev.
> + * @cond: condition to be match
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Ignore any errors.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> + */
> #define __v4l2_device_call_subdevs_p(v4l2_dev, sd, cond, o, f, args...) \
> do { \
> list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) \
> @@ -228,6 +257,24 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> (sd)->ops->o->f((sd) , ##args); \
> } while (0)
>
> +/**
> + * __v4l2_device_call_subdevs - Calls the specified callback for
> + * all subdevs matching the condition.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @cond: condition to be match
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Ignore any errors.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> + */
> #define __v4l2_device_call_subdevs(v4l2_dev, cond, o, f, args...) \
> do { \
> struct v4l2_subdev *__sd; \
> @@ -236,10 +283,29 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> f , ##args); \
> } while (0)
>
> -/* Call the specified callback for all subdevs matching the condition.
> - If the callback returns an error other than 0 or -ENOIOCTLCMD, then
> - return with that error code. Note that you cannot add or delete a
> - subdev while walking the subdevs list. */
> +/**
> + * __v4l2_device_call_subdevs_until_err_p - Calls the specified callback for
> + * all subdevs matching the condition.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @sd: pointer that will be filled by the macro with all
> + * &struct v4l2_subdev sub-devices associated with @v4l2_dev.
> + * @cond: condition to be match
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Return:
> + *
> + * If the callback returns an error other than 0 or ``-ENOIOCTLCMD``
> + * for any subdevice, then abort and return with that error code.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> + */
> #define __v4l2_device_call_subdevs_until_err_p(v4l2_dev, sd, cond, o, f, args...) \
> ({ \
> long __err = 0; \
> @@ -253,6 +319,27 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> (__err == -ENOIOCTLCMD) ? 0 : __err; \
> })
>
> +/**
> + * __v4l2_device_call_subdevs_until_err - Calls the specified callback for
> + * all subdevs matching the condition.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @cond: condition to be match
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Return:
> + *
> + * If the callback returns an error other than 0 or ``-ENOIOCTLCMD``
> + * for any subdevice, then abort and return with that error code.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> + */
> #define __v4l2_device_call_subdevs_until_err(v4l2_dev, cond, o, f, args...) \
> ({ \
> struct v4l2_subdev *__sd; \
> @@ -260,9 +347,25 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> f , ##args); \
> })
>
> -/* Call the specified callback for all subdevs matching grp_id (if 0, then
> - match them all). Ignore any errors. Note that you cannot add or delete
> - a subdev while walking the subdevs list. */
> +/**
> + * v4l2_device_call_all - Calls the specified callback for
> + * all subdevs matching a device-specific group ID.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @grpid: &struct v4l2_subdev->grp_id group ID to match.
> + * Use 0 to match them all.
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Ignore any errors.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> + */
> #define v4l2_device_call_all(v4l2_dev, grpid, o, f, args...) \
> do { \
> struct v4l2_subdev *__sd; \
> @@ -272,10 +375,28 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> ##args); \
> } while (0)
>
> -/* Call the specified callback for all subdevs matching grp_id (if 0, then
> - match them all). If the callback returns an error other than 0 or
> - -ENOIOCTLCMD, then return with that error code. Note that you cannot
> - add or delete a subdev while walking the subdevs list. */
> +/**
> + * v4l2_device_call_until_err - Calls the specified callback for
> + * all subdevs matching a device-specific group ID.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @grpid: &struct v4l2_subdev->grp_id group ID to match.
> + * Use 0 to match them all.
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Return:
> + *
> + * If the callback returns an error other than 0 or ``-ENOIOCTLCMD``
> + * for any subdevice, then abort and return with that error code.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> + */
> #define v4l2_device_call_until_err(v4l2_dev, grpid, o, f, args...) \
> ({ \
> struct v4l2_subdev *__sd; \
> @@ -284,10 +405,24 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> ##args); \
> })
>
> -/*
> - * Call the specified callback for all subdevs where grp_id & grpmsk != 0
> - * (if grpmsk == `0, then match them all). Ignore any errors. Note that you
> - * cannot add or delete a subdev while walking the subdevs list.
> +/**
> + * v4l2_device_mask_call_all - Calls the specified callback for
> + * all subdevices where a group ID matches a specified bitmask.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
> + * group ID to be matched. Use 0 to match them all.
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Ignore any errors.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> */
> #define v4l2_device_mask_call_all(v4l2_dev, grpmsk, o, f, args...) \
> do { \
> @@ -298,11 +433,27 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> ##args); \
> } while (0)
>
> -/*
> - * Call the specified callback for all subdevs where grp_id & grpmsk != 0
> - * (if grpmsk == 0, then match them all). If the callback returns an error
> - * other than 0 or %-ENOIOCTLCMD, then return with that error code. Note that
> - * you cannot add or delete a subdev while walking the subdevs list.
> +/**
> + * v4l2_device_mask_call_until_err - Calls the specified callback for
> + * all subdevices where a group ID matches a specified bitmask.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
> + * group ID to be matched. Use 0 to match them all.
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> + * @args...: arguments for @f.
> + *
> + * Return:
> + *
> + * If the callback returns an error other than 0 or ``-ENOIOCTLCMD``
> + * for any subdevice, then abort and return with that error code.
> + *
> + * Note: subdevs cannot be added or deleted while walking at
> + * the subdevs list.
> */
> #define v4l2_device_mask_call_until_err(v4l2_dev, grpmsk, o, f, args...) \
> ({ \
> @@ -312,9 +463,19 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> ##args); \
> })
>
> -/*
> - * Does any subdev with matching grpid (or all if grpid == 0) has the given
> - * op?
> +
> +/**
> + * v4l2_device_has_op - checks if any subdev with matching grpid has a
> + * given ops.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @grpid: &struct v4l2_subdev->grp_id group ID to match.
> + * Use 0 to match them all.
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> */
> #define v4l2_device_has_op(v4l2_dev, grpid, o, f) \
> ({ \
> @@ -331,9 +492,18 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
> __result; \
> })
>
> -/*
> - * Does any subdev with matching grpmsk (or all if grpmsk == 0) has the given
> - * op?
> +/**
> + * v4l2_device_mask_has_op - checks if any subdev with matching group
> + * mask has a given ops.
> + *
> + * @v4l2_dev: pointer to &struct v4l2_device
> + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
> + * group ID to be matched. Use 0 to match them all.
> + * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
> + * Each element there groups a set of callbacks functions.
> + * @f: callback function that will be called if @cond matches.
> + * The callback functions are defined in groups, according to
> + * each element at &struct v4l2_subdev_ops.
> */
> #define v4l2_device_mask_has_op(v4l2_dev, grpmsk, o, f) \
> ({ \
>
