[PATCH 4/4] media: ov7670: add get_fmt() pad ops callback

[Akinobu Mita <akinobu.mita@xxxxxxxxx>]

This enables to print the current format on the source pad of the ov7670
subdev by media-ctl.

Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
---
 drivers/media/i2c/ov7670.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index 38e1876..9fe99c5 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -234,6 +234,7 @@ struct ov7670_info {
 		struct v4l2_ctrl *hue;
 	};
 	struct ov7670_format_struct *fmt;  /* Current format */
+	struct ov7670_win_size *wsize;	/* Current format */
 	struct clk *clk;
 	struct gpio_desc *resetb_gpio;
 	struct gpio_desc *pwdn_gpio;
@@ -875,6 +876,36 @@ static int ov7670_set_framerate_legacy(struct v4l2_subdev *sd,
 	return ov7670_write(sd, REG_CLKRC, info->clkrc);
 }
 
+static int ov7670_get_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *fmt)
+{
+	struct ov7670_info *info = to_state(sd);
+
+	if (fmt->pad)
+		return -EINVAL;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+		struct v4l2_mbus_framefmt *mf;
+
+		mf = v4l2_subdev_get_try_format(sd, cfg, 0);
+		fmt->format = *mf;
+		return 0;
+#else
+		return -ENOTTY;
+#endif
+	}
+
+	fmt->format.colorspace = info->fmt->colorspace;
+	fmt->format.code = info->fmt->mbus_code;
+	fmt->format.field = V4L2_FIELD_NONE;
+	fmt->format.width = info->wsize->width;
+	fmt->format.height = info->wsize->height;
+
+	return 0;
+}
+
 /*
  * Store a set of start/stop values into the camera.
  */
@@ -1026,6 +1057,7 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd,
 	if (wsize->regs)
 		ret = ov7670_write_array(sd, wsize->regs);
 	info->fmt = ovfmt;
+	info->wsize = wsize;
 
 	/*
 	 * If we're running RGB565, we must rewrite clkrc after setting
@@ -1529,6 +1561,7 @@ static const struct v4l2_subdev_pad_ops ov7670_pad_ops = {
 	.enum_frame_interval = ov7670_enum_frame_interval,
 	.enum_frame_size = ov7670_enum_frame_size,
 	.enum_mbus_code = ov7670_enum_mbus_code,
+	.get_fmt = ov7670_get_fmt,
 	.set_fmt = ov7670_set_fmt,
 };
 
@@ -1647,6 +1680,7 @@ static int ov7670_probe(struct i2c_client *client,
 
 	info->devtype = &ov7670_devdata[id->driver_data];
 	info->fmt = &ov7670_formats[0];
+	info->wsize = &info->devtype->win_sizes[0];
 	info->clkrc = 0;
 
 	/* Set default frame rate to 30 fps */
-- 
2.7.4