Dear all, I recently got a Geniatech X9320 DVB-S2 PCIe card : https://www.geniatech.com/product/x9320-quad-dvb-s2s-tv-tuner/ The card is not listed in the LinuxTV so it's most probably not supported as of now. I quickly tried it on a 4.9 kernel and it seems that no driver was loaded. On the hardware side, the board is based on the following ICs : - Renesas µPD720201 USB 3.0 controller (4 ports) - Cypress CY68013 USB bridge - Montage M88DS3103as demodulator - Unknown RF Tuner but most probably Montage M88TS2022. If required, I can remove the RF shield and have a look at the chip. The board is very similar to the Geniatech HD Star (hardware V3.0) : https://www.linuxtv.org/wiki/index.php/Geniatech_HD_Star_DVB-S2_USB2.0 However, it reports a different idProduct. Instead of 0x3000 (idProduct of Geniatech HD Star), it returns the following list (different idProduct for each DVB-S2 tuner) : Bus 001 Device 005: ID 1f4d:3300 G-Tek Electronics Group Bus 001 Device 004: ID 1f4d:3301 G-Tek Electronics Group Bus 001 Device 003: ID 1f4d:3302 G-Tek Electronics Group Bus 001 Device 002: ID 1f4d:3303 G-Tek Electronics Group I assume that since the hardware is almost the same, the drivers used for the HD Star should work with the X9320 card by adding the new idProduct. I've no experience in Linux driver development but I would give it a try if someone can show me where to look at. Regards, Alex
