Hi Mauro,
Here is the new tango driver and some fixes to ensure drivers which depend
on device tree, only build if device tree is enabled (or test compile).
Please note that MAINTAINERS already has an entry for tango, which matches
the new driver.
Thanks,
Sean
The following changes since commit c1301077213d4dca34f01fc372b64d3c4a49a437:
[media] media: rc: fix gpio-ir-receiver build failure (2017-10-05 10:16:21 -0300)
are available in the git repository at:
git://linuxtv.org/syoung/media_tree.git for-v4.15b
for you to fetch changes up to d4218fbb8c47457c172a60ccc7f0baec7ce1f6f6:
media: rc: ir-spi needs OF (2017-10-09 11:27:29 +0100)
----------------------------------------------------------------
David Härdeman (1):
media: lirc_dev: remove min_timeout and max_timeout
Mans Rullgard (1):
media: rc: Add driver for tango HW IR decoder
Marc Gonzalez (2):
media: rc: Add tango keymap
media: dt: bindings: Add binding for tango HW IR decoder
Sean Young (6):
media: rc: nec decoder should not send both repeat and keycode
media: rc: gpio-ir-tx does not work without devicetree or gpiolib
media: rc: pwm-ir-tx needs OF
media: rc: hix5hd2 drivers needs OF
media: rc: check for integer overflow
media: rc: ir-spi needs OF
.../devicetree/bindings/media/tango-ir.txt | 21 ++
drivers/media/rc/Kconfig | 14 +
drivers/media/rc/Makefile | 1 +
drivers/media/rc/ir-lirc-codec.c | 9 +-
drivers/media/rc/ir-nec-decoder.c | 29 ++-
drivers/media/rc/keymaps/Makefile | 1 +
drivers/media/rc/keymaps/rc-tango.c | 92 +++++++
drivers/media/rc/lirc_dev.c | 18 --
drivers/media/rc/tango-ir.c | 281 +++++++++++++++++++++
include/media/lirc_dev.h | 6 -
include/media/rc-map.h | 1 +
11 files changed, 434 insertions(+), 39 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/tango-ir.txt
create mode 100644 drivers/media/rc/keymaps/rc-tango.c
create mode 100644 drivers/media/rc/tango-ir.c
