[PATCH v2 00/25] lirc scancode interface, and more

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce lirc scancode mode, use that to port lirc_zilog to rc-core
using that interface, and then remove the lirc kernel api.

In summary:
 - This removes the lirc staging directory.
 - lirc IR TX can use in-kernel encoders for scancode encoding
 - lirc_zilog uses the same interface
 - lirc kapi (not uapi!) is gone
 - The reading lirc scancode gives more information (e.g. protocol,
   toggle, repeat). So you can determine what protocol variant a remotes uses
 - Line count is actually down and code cleaner (imo)
 - The scancode interface can be used for cec keycode transmit.

On the cec keycode transmit I am hoping for feedback. Also I am ensure what
to do with the new firmware file for the zilog_ir.

v2:
 - Add MAINTAINERS entries
 - Fixes for nec repeat
 - Validate scancode for tx
 - Minor bugfixes

Sean Young (25):
  media: lirc: implement scancode sending
  media: lirc: use the correct carrier for scancode transmit
  media: rc: auto load encoder if necessary
  media: lirc_zilog: remove receiver
  media: lirc_zilog: fix variable types and other ugliness
  media: lirc_zilog: port to rc-core using scancode tx interface
  media: promote lirc_zilog out of staging
  media: lirc: remove LIRCCODE and LIRC_GET_LENGTH
  media: lirc: lirc interface should not be a raw decoder
  media: lirc: validate scancode for transmit
  media: lirc: merge lirc_dev_fop_ioctl and ir_lirc_ioctl
  media: lirc: use kfifo rather than lirc_buffer for raw IR
  media: lirc: move lirc_dev->attached to rc_dev->registered
  media: lirc: do not call rc_close() on unregistered devices
  media: lirc: create rc-core open and close lirc functions
  media: lirc: remove name from lirc_dev
  media: lirc: remove last remnants of lirc kapi
  media: lirc: implement reading scancode
  media: rc: ensure lirc device receives nec repeats
  media: lirc: document LIRC_MODE_SCANCODE
  media: lirc: introduce LIRC_SET_POLL_MODE
  media: lirc: scancode rc devices should have a lirc device too
  media: MAINTAINERS: remove lirc staging area
  media: MAINTAINERS: add entry for zilog_ir
  media: rc: nec decoder should not send both repeat and keycode

 Documentation/media/kapi/rc-core.rst               |    5 -
 Documentation/media/lirc.h.rst.exceptions          |   31 +
 Documentation/media/uapi/rc/lirc-dev-intro.rst     |   43 +-
 Documentation/media/uapi/rc/lirc-func.rst          |    2 +-
 Documentation/media/uapi/rc/lirc-get-features.rst  |   17 +-
 Documentation/media/uapi/rc/lirc-get-length.rst    |   44 -
 Documentation/media/uapi/rc/lirc-get-rec-mode.rst  |    7 +-
 Documentation/media/uapi/rc/lirc-get-send-mode.rst |    4 +-
 Documentation/media/uapi/rc/lirc-read.rst          |   14 +-
 Documentation/media/uapi/rc/lirc-set-poll-mode.rst |   45 +
 Documentation/media/uapi/rc/lirc-write.rst         |   16 +-
 MAINTAINERS                                        |   12 +-
 drivers/media/rc/Kconfig                           |   41 +-
 drivers/media/rc/Makefile                          |    6 +-
 drivers/media/rc/ir-jvc-decoder.c                  |    1 +
 drivers/media/rc/ir-lirc-codec.c                   |  560 ++++---
 drivers/media/rc/ir-mce_kbd-decoder.c              |   12 +-
 drivers/media/rc/ir-nec-decoder.c                  |   30 +-
 drivers/media/rc/ir-rc5-decoder.c                  |    1 +
 drivers/media/rc/ir-rc6-decoder.c                  |    1 +
 drivers/media/rc/ir-sanyo-decoder.c                |    1 +
 drivers/media/rc/ir-sharp-decoder.c                |    1 +
 drivers/media/rc/ir-sony-decoder.c                 |    1 +
 drivers/media/rc/lirc_dev.c                        |  481 +-----
 drivers/media/rc/rc-core-priv.h                    |   54 +-
 drivers/media/rc/rc-ir-raw.c                       |   56 +-
 drivers/media/rc/rc-main.c                         |  150 +-
 drivers/media/rc/zilog_ir.c                        |  742 +++++++++
 drivers/staging/media/Kconfig                      |    3 -
 drivers/staging/media/Makefile                     |    1 -
 drivers/staging/media/lirc/Kconfig                 |   21 -
 drivers/staging/media/lirc/Makefile                |    6 -
 drivers/staging/media/lirc/TODO                    |   36 -
 drivers/staging/media/lirc/lirc_zilog.c            | 1653 --------------------
 include/media/lirc_dev.h                           |  192 ---
 include/media/rc-core.h                            |   55 +-
 include/media/rc-map.h                             |   54 +-
 include/uapi/linux/lirc.h                          |   93 ++
 38 files changed, 1701 insertions(+), 2791 deletions(-)
 delete mode 100644 Documentation/media/uapi/rc/lirc-get-length.rst
 create mode 100644 Documentation/media/uapi/rc/lirc-set-poll-mode.rst
 create mode 100644 drivers/media/rc/zilog_ir.c
 delete mode 100644 drivers/staging/media/lirc/Kconfig
 delete mode 100644 drivers/staging/media/lirc/Makefile
 delete mode 100644 drivers/staging/media/lirc/TODO
 delete mode 100644 drivers/staging/media/lirc/lirc_zilog.c
 delete mode 100644 include/media/lirc_dev.h

-- 
2.13.6




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux