If you want to poll for both decoded scancodes and raw IR, then this
ioctl will help you.
int fd = open("/dev/lirc0", O_RDONLY | O_NONBLOCK);
for (;;) {
unsigned mode = LIRC_MODE_SCANCODE | LIRC_MODE_MODE2;
ioctl(fd, LIRC_SET_POLL_MODE, &mode);
poll(&((struct pollfd){ .fd = fd, .events = POLLIN }), 1, -1);
mode = LIRC_MODE_SCANCODE;
ioctl(fd, LIRC_SET_REC_MODE, &mode);
struct lirc_scancode sc;
if (read(fd, &sc, sizeof(sc)) == sizeof(sc)) {
printf("scancode protocol:%d scancode:%llx\n",
sc.rc_proto, sc.scancode);
}
mode = LIRC_MODE_MODE2;
ioctl(fd, LIRC_SET_REC_MODE, &mode);
unsigned sample;
if (read(fd, &sample, sizeof(sample)) == sizeof(sample)) {
if (LIRC_IS_SPACE(sample))
printf("space %u\n", LIRC_VAL(sample)));
if (LIRC_IS_PULSE(sample))
printf("pulse %u\n", LIRC_VAL(sample)));
}
}
Note that LIRC_SET_REC_MODE will also affect the poll mode, so you
must set it again before calling poll.
Signed-off-by: Sean Young <sean@xxxxxxxx>
---
Documentation/media/uapi/rc/lirc-func.rst | 1 +
Documentation/media/uapi/rc/lirc-set-poll-mode.rst | 44 ++++++++++++++++++++++
drivers/media/rc/ir-lirc-codec.c | 25 +++++++++---
drivers/media/rc/lirc_dev.c | 1 +
include/media/rc-core.h | 3 ++
5 files changed, 68 insertions(+), 6 deletions(-)
create mode 100644 Documentation/media/uapi/rc/lirc-set-poll-mode.rst
diff --git a/Documentation/media/uapi/rc/lirc-func.rst b/Documentation/media/uapi/rc/lirc-func.rst
index ddb4620de294..a09fb03f6722 100644
--- a/Documentation/media/uapi/rc/lirc-func.rst
+++ b/Documentation/media/uapi/rc/lirc-func.rst
@@ -25,3 +25,4 @@ LIRC Function Reference
lirc-set-rec-timeout-reports
lirc-set-measure-carrier-mode
lirc-set-wideband-receiver
+ lirc-set-poll-mode
diff --git a/Documentation/media/uapi/rc/lirc-set-poll-mode.rst b/Documentation/media/uapi/rc/lirc-set-poll-mode.rst
new file mode 100644
index 000000000000..56112bb0dcc9
--- /dev/null
+++ b/Documentation/media/uapi/rc/lirc-set-poll-mode.rst
@@ -0,0 +1,44 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _lirc_set_poll_mode:
+
+**********************************************
+ioctls LIRC_SET_POLL_MODE
+**********************************************
+
+Name
+====
+
+LIRC_SET_POLL_MODE - Set poll modes
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_POLL_MODE, __u32 modes)
+ :name: LIRC_SET_POLL_MODE
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``modes``
+ Bitmask with enabled poll lirc modes
+
+Description
+===========
+
+Set lirc modes for which read readiness is reported by poll. Only
+:ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` and
+:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported.
+Use :ref:`lirc_get_features` to find out which modes the driver supports.
+
+Note that using :ref:`lirc-set-rec-mode` resets the poll mode.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index 43936128e303..46c6e05e85a6 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -342,6 +342,17 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
return -EINVAL;
dev->rec_mode = val;
+ dev->poll_mode = val;
+ return 0;
+
+ case LIRC_SET_POLL_MODE:
+ if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
+ return -ENOTTY;
+
+ if (val & ~(LIRC_MODE_MODE2 | LIRC_MODE_SCANCODE))
+ return -EINVAL;
+
+ dev->poll_mode = val;
return 0;
case LIRC_GET_SEND_MODE:
@@ -480,12 +491,14 @@ static unsigned int ir_lirc_poll(struct file *file,
if (!rcdev->registered) {
events = POLLHUP | POLLERR;
- } else if (rcdev->rec_mode == LIRC_MODE_SCANCODE) {
- if (!kfifo_is_empty(&rcdev->scancodes))
- events = POLLIN | POLLRDNORM;
- } else if (rcdev->rec_mode == LIRC_MODE_MODE2) {
- if (!kfifo_is_empty(&rcdev->rawir))
- events = POLLIN | POLLRDNORM;
+ } else {
+ if ((rcdev->poll_mode & LIRC_MODE_SCANCODE) &&
+ !kfifo_is_empty(&rcdev->scancodes))
+ events |= POLLIN | POLLRDNORM;
+
+ if ((rcdev->poll_mode & LIRC_MODE_MODE2) &&
+ !kfifo_is_empty(&rcdev->rawir))
+ events |= POLLIN | POLLRDNORM;
}
return events;
diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index e5672b0a6dc4..df592240f1e5 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -57,6 +57,7 @@ int ir_lirc_register(struct rc_dev *dev)
dev->lirc_dev.release = lirc_release_device;
dev->send_mode = LIRC_MODE_PULSE;
dev->rec_mode = LIRC_MODE_MODE2;
+ dev->poll_mode = LIRC_MODE_MODE2;
if (dev->driver_type == RC_DRIVER_IR_RAW) {
if (kfifo_alloc(&dev->rawir, MAX_IR_EVENT_SIZE, GFP_KERNEL))
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index 86f62e75dcab..da9624b2cc1a 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -132,6 +132,8 @@ enum rc_filter_type {
* LIRC_MODE_PULSE
* @rec_mode: lirc mode for recording, either LIRC_MODE_SCANCODE or
* LIRC_MODE_MODE2
+ * @poll_mode: lirc mode used for polling, can poll for both LIRC_MODE_SCANCODE
+ * and LIRC_MODE_MODE2
* @registered: set to true by rc_register_device(), false by
* rc_unregister_device
* @change_protocol: allow changing the protocol used on hardware decoders
@@ -208,6 +210,7 @@ struct rc_dev {
wait_queue_head_t wait_poll;
u8 send_mode;
u8 rec_mode;
+ u8 poll_mode;
#endif
bool registered;
int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
--
2.13.5
