Hi Andrey, On Monday, 25 September 2017 15:40:13 EEST Andrey Konovalov wrote: > Hi! > > I've got the following report while fuzzing the kernel with syzkaller. Thank you for the report. > On commit e19b205be43d11bff638cad4487008c48d21c103 (4.14-rc2). > > list_add double add: new=ffff880069084010, prev=ffff880069084010, > next=ffff880067d22298. > ------------[ cut here ]------------ > WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0 > Modules linked in: > CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted > 4.14.0-rc2-42613-g1488251d1a98 #238 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 > Workqueue: usb_hub_wq hub_event > task: ffff88006b01ca40 task.stack: ffff880064358000 > RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29 > RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286 > RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000 > RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac > RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000 > R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010 > R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0 > FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0 > Call Trace: > __list_add ./include/linux/list.h:59 > list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92 > uvc_scan_chain_forward.isra.8+0x373/0x416 > drivers/media/usb/uvc/uvc_driver.c:1471 > uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585 > uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769 > uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104 So the issue happens at probe time, before the driver registers the V4L2 device nodes that allow userspace access to the device. I wonder how fuzzing caused this. Do you have a more detailed log ? Could you also tell me what webcam you're using to test this out ? The output of lsusb -v would be useful. > usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 > really_probe drivers/base/dd.c:413 > driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 > __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 > bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 > __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 > device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 > bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 > device_add+0xd0b/0x1660 drivers/base/core.c:1835 > usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 > generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 > usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 > really_probe drivers/base/dd.c:413 > driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 > __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 > bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 > __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 > device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 > bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 > device_add+0xd0b/0x1660 drivers/base/core.c:1835 > usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 > hub_port_connect drivers/usb/core/hub.c:4903 > hub_port_connect_change drivers/usb/core/hub.c:5009 > port_event drivers/usb/core/hub.c:5115 > hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 > process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 > worker_thread+0x221/0x1850 kernel/workqueue.c:2253 > kthread+0x3a1/0x470 kernel/kthread.c:231 > ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 > Code: f1 48 c7 c7 c0 89 a5 85 48 89 de e8 38 34 e1 fe 0f ff 31 c0 eb > c3 48 89 f2 48 89 d9 4c 89 e6 48 c7 c7 40 8a a5 85 e8 1d 34 e1 fe <0f> > ff 31 c0 eb a8 48 89 75 e8 e8 e4 b3 2a ff 48 8b 75 e8 e9 5b > ---[ end trace 23181469b7a6915e ]--- -- Regards, Laurent Pinchart
