Re: [PATCH] v4l: vsp1: Start and stop DRM pipeline independently of planes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

Thankyou for the patch.

On 15/08/17 23:57, Laurent Pinchart wrote:
> The KMS API supports enabling a CRTC without any plane. To enable that
> use case, we need to start the pipeline when configuring the LIF,
> instead of when enabling the first plane.

Tested and verified on Salvator-X ES1.0 using the KMS Test suite, including
suspend/resume, in combination with the "[PATCH 0/3] R-Car DU: Clip planes to
screen boundaries" series.

Tested-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

> ---
>  drivers/media/platform/vsp1/vsp1_drm.c | 37 +++++++++++++++++++++++++---------
>  1 file changed, 27 insertions(+), 10 deletions(-)
> 
> This patch is based on top of the VSP+DU large patch series queued through
> Dave's DRM tree for v4.14-rc1. It doesn't can't be merged independently
> through the linux-media tree for the same kernel version. As the change is not
> urgent, it can be delayed until v4.15-rc1.
> 
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index 4dfbeac8f42c..7ce69f23f50a 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -84,8 +84,12 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
>  	struct vsp1_drm_pipeline *drm_pipe;
>  	struct vsp1_pipeline *pipe;
>  	struct vsp1_bru *bru;
> +	struct vsp1_entity *entity;
> +	struct vsp1_entity *next;
> +	struct vsp1_dl_list *dl;
>  	struct v4l2_subdev_format format;
>  	const char *bru_name;
> +	unsigned long flags;
>  	unsigned int i;
>  	int ret;
>  
> @@ -250,6 +254,29 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
>  	vsp1_write(vsp1, VI6_DISP_IRQ_STA, 0);
>  	vsp1_write(vsp1, VI6_DISP_IRQ_ENB, 0);
>  
> +	/* Configure all entities in the pipeline. */
> +	dl = vsp1_dl_list_get(pipe->output->dlm);
> +
> +	list_for_each_entry_safe(entity, next, &pipe->entities, list_pipe) {
> +		vsp1_entity_route_setup(entity, pipe, dl);
> +
> +		if (entity->ops->configure) {
> +			entity->ops->configure(entity, pipe, dl,
> +					       VSP1_ENTITY_PARAMS_INIT);
> +			entity->ops->configure(entity, pipe, dl,
> +					       VSP1_ENTITY_PARAMS_RUNTIME);
> +			entity->ops->configure(entity, pipe, dl,
> +					       VSP1_ENTITY_PARAMS_PARTITION);
> +		}

Hrm ... this configure section now has quite a lot duplicated from the
vsp1_du_atomic_flush(). Perhaps we could abstract that part out to a common
function - but I don't think that's essential.


> +	}
> +
> +	vsp1_dl_list_commit(dl);
> +
> +	/* Start the pipeline. */
> +	spin_lock_irqsave(&pipe->irqlock, flags);
> +	vsp1_pipeline_run(pipe);
> +	spin_unlock_irqrestore(&pipe->irqlock, flags);
> +
>  	dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
>  
>  	return 0;
> @@ -488,7 +515,6 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index)
>  	struct vsp1_entity *next;
>  	struct vsp1_dl_list *dl;
>  	const char *bru_name;
> -	unsigned long flags;
>  	unsigned int i;
>  	int ret;
>  
> @@ -570,15 +596,6 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index)
>  	}
>  
>  	vsp1_dl_list_commit(dl);
> -
> -	/* Start or stop the pipeline if needed. */
> -	if (!drm_pipe->enabled && pipe->num_inputs) {
> -		spin_lock_irqsave(&pipe->irqlock, flags);
> -		vsp1_pipeline_run(pipe);
> -		spin_unlock_irqrestore(&pipe->irqlock, flags);
> -	} else if (drm_pipe->enabled && !pipe->num_inputs) {
> -		vsp1_pipeline_stop(pipe);
> -	}
>  }
>  EXPORT_SYMBOL_GPL(vsp1_du_atomic_flush);
>  
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux