There was no specific item regarding what should be done to sensor, lens
and flash drivers. Add one, to replace the vague item denoting support
only to particular sensor, lens and flash devices.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/staging/media/atomisp/TODO | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/media/atomisp/TODO b/drivers/staging/media/atomisp/TODO
index 737452c..a960247 100644
--- a/drivers/staging/media/atomisp/TODO
+++ b/drivers/staging/media/atomisp/TODO
@@ -36,13 +36,18 @@
there are any specific things that can be done to fold in support for
multiple firmware versions.
+8. Switch to V4L2 async API to set up sensor, lens and flash devices.
+ Control those devices using V4L2 sub-device API without custom
+ extensions.
-Limitations:
+9. Switch to standard V4L2 sub-device API for sensor, lens and flash
+ drivers. In particular, the user space API needs to support V4L2
+ controls as defined in the V4L2 spec and references to atomisp must be
+ removed from these drivers.
-1. Currently the patch only support some camera sensors
- gc2235/gc0310/0v2680/ov2722/ov5693/mt9m114...
+Limitations:
-2. To test the patches, you also need the ISP firmware
+1. To test the patches, you also need the ISP firmware
for BYT:/lib/firmware/shisp_2400b0_v21.bin
for CHT:/lib/firmware/shisp_2401a0_v21.bin
@@ -51,14 +56,14 @@ Limitations:
device but can also be extracted from the upgrade kit if you've managed
to lose them somehow.
-3. Without a 3A libary the capture behaviour is not very good. To take a good
+2. Without a 3A libary the capture behaviour is not very good. To take a good
picture, you need tune ISP parameters by IOCTL functions or use a 3A libary
such as libxcam.
-4. The driver is intended to drive the PCI exposed versions of the device.
+3. The driver is intended to drive the PCI exposed versions of the device.
It will not detect those devices enumerated via ACPI as a field of the
i915 GPU driver.
-5. The driver supports only v2 of the IPU/Camera. It will not work with the
+4. The driver supports only v2 of the IPU/Camera. It will not work with the
versions of the hardware in other SoCs.
--
2.7.4
