On Sun, 2017-09-24 at 16:59 +0200, Devid Antonio Floni wrote:
> The ov5648 5-megapixel camera sensor from OmniVision supports up to
> 2592x1944
> resolution and MIPI CSI-2 interface. Output format is raw sRGB/Bayer
> with
> 10 bits per colour (SGRBG10_1X10).
>
> This patch is a port of ov5648 driver after applying following
> 01org/ProductionKernelQuilts patches:
> - 0004-ov2680-ov5648-Fork-lift-source-from-CTS.patch
> - 0005-ov2680-ov5648-gminification.patch
> - 0006-ov5648-Focus-support.patch
> - 0007-Fix-resolution-issues-on-rear-camera.patch
> - 0008-ov2680-ov5648-Enabled-the-set_exposure-functions.patch
> - 0010-IRDA-cameras-mode-list-cleanup-unification.patch
> - 0012-ov5648-Add-1296x972-binned-mode.patch
> - 0014-ov5648-Adapt-to-Atomisp2-Gmin-VCM-framework.patch
> - 0015-dw9714-Gmin-Atomisp-specific-VCM-driver.patch
> - 0017-ov5648-Fix-deadlock-on-I2C-error.patch
> - 0018-gc2155-Fix-deadlock-on-error.patch
> - 0019-ov5648-Add-1280x960-binned-mode.patch
> - 0020-ov5648-Make-1280x960-as-default-video-resolution.patch
> - 0021-MALATA-Fix-testCameraToSurfaceTextureMetadata-CTS.patch
> - 0023-OV5648-Added-5MP-video-resolution.patch
>
> New changes introduced during the port:
> - Rename entity types to entity functions
> - Replace v4l2_subdev_fh by v4l2_subdev_pad_config
> - Make use of media_bus_format enum
> - Rename media_entity_init function to media_entity_pads_init
> - Replace try_mbus_fmt by set_fmt
> - Replace s_mbus_fmt by set_fmt
> - Replace g_mbus_fmt by get_fmt
> - Use s_ctrl/g_volatile_ctrl instead of ctrl core ops
> - Update gmin platform API path
> - Constify acpi_device_id
> - Add "INT5648" value to acpi_device_id
> - Fix some checkpatch errors and warnings
> - Remove FSF's mailing address from the sample GPL notice
>
> Changes in v2:
> - Fix indentation
> - Add atomisp prefix to Kconfig option
The above paragraph usually goes after --- delimiter line.
While v2 is better, it needs much more work. See my few comments (tip of
an iceberg) below.
>
> "INT5648" ACPI device id can be found in following production
> hardware:
> BIOS Information
> Vendor: LENOVO
> Version: 1HCN40WW
> Release Date: 11/04/2016
> ...
> BIOS Revision: 0.40
> Firmware Revision: 0.0
> ...
> System Information
> Manufacturer: LENOVO
> Product Name: 80SG
> Version: MIIX 310-10ICR
> ...
> SKU Number: LENOVO_MT_80SG_BU_idea_FM_MIIX 310-10ICR
> Family: IDEAPAD
> ...
>
> Device DSDT excerpt:
> Device (CA00)
> {
> Name (_ADR, Zero) // _ADR: Address
> Name (_HID, "INT5648") // _HID: Hardware ID
> Name (_CID, "INT5648") // _CID: Compatible ID
> Name (_SUB, "INTL0000") // _SUB: Subsystem ID
> Name (_DDN, "ov5648") // _DDN: DOS Device Name
> ...
Thanks for the above description!
>
> I was not able to properly test this patch on my Lenovo Miix 310 due
> to other
> issues with atomisp, the output is the same as ov2680 driver
> (OVTI2680)
> which is very similar.
> +#include <linux/module.h>
(1)
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/mm.h>
> +#include <linux/string.h>
> +#include <linux/errno.h>
> +#include <linux/init.h>
(2)
> +#include <linux/kmod.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/moduleparam.h>
> +#include <media/v4l2-device.h>
> +#include <linux/io.h>
> +#include "../include/linux/atomisp_gmin_platform.h"
> +
> +#include "ov5648.h"
One of (1) and (2) is redundant.
Can we also keep them in alphabetical order? Rationale is to fast search
among and avoiding duplication.
> +static int ov5648_read_reg(struct i2c_client *client,
> + u16 data_length, u16 reg, u16 *val)
> +{
> + int err;
> + struct i2c_msg msg[2];
> + unsigned char data[6];
> +
> + if (!client->adapter) {
> + dev_err(&client->dev, "%s error, no client-
> >adapter\n",
> + __func__);
> + return -ENODEV;
> + }
Hmm... When it's possible?
> +
> + if (data_length != OV5648_8BIT && data_length != OV5648_16BIT
> + && data_length !=
> OV5648_32BIT) {
> + dev_err(&client->dev, "%s error, invalid data
> length\n",
> + __func__);
> + return -EINVAL;
> + }
> +
>
> +
> + err = i2c_transfer(client->adapter, msg, 2);
> + if (err != 2) {
> + if (err >= 0)
> + err = -EIO;
This will hide an error below (in case it's returned -EIO vs. err ==
1)...
> + dev_err(&client->dev,
> + "read from offset 0x%x error %d", reg, err);
...thus would be better to
dev_err();
return err < 0 ? err : - EIO;
> + return err;
> + }
> +
> + *val = 0;
> + /* high byte comes first */
> + if (data_length == OV5648_8BIT)
> + *val = (u8)data[0];
> + else if (data_length == OV5648_16BIT)
> + *val = be16_to_cpu(*(u16 *)&data[0]);
> + else
> + *val = be32_to_cpu(*(u32 *)&data[0]);
If you can use i2c_smbus_*() functions they will convert endianess at
the same time.
> +
> + return 0;
> +}
>
> +static int ov5648_write_reg(struct i2c_client *client, u16
> data_length,
> + u16 reg, u16 val)
> +{
> + int ret;
> + unsigned char data[4] = {0};
> + u16 *wreg = (u16 *)data;
> + const u16 len = data_length + sizeof(u16); /* 16-bit address
> + data */
> +
> + if (data_length != OV5648_8BIT && data_length !=
> OV5648_16BIT) {
Where 32 bit data width gone?
> + dev_err(&client->dev,
> + "%s error, invalid data_length\n", __func__);
> + return -EINVAL;
> + }
> +
> + /* high byte goes out first */
> + *wreg = cpu_to_be16(reg);
> +
> + if (data_length == OV5648_8BIT) {
> + data[2] = (u8)(val);
> + } else {
> + /* OV5648_16BIT */
> + u16 *wdata = (u16 *)&data[2];
> + *wdata = cpu_to_be16(val);
> + }
> +
> + ret = ov5648_i2c_write(client, len, data);
> + if (ret)
> + dev_err(&client->dev,
> + "write error: wrote 0x%x to offset 0x%x error
> %d",
> + val, reg, ret);
> +
> + return ret;
> +}
> +static int ov5648_write_reg_array(struct i2c_client *client,
> + const struct ov5648_reg *reglist)
> +{
> + const struct ov5648_reg *next = reglist;
> + struct ov5648_write_ctrl ctrl;
> + int err;
> +
> + ctrl.index = 0;
> + for (; next->type != OV5648_TOK_TERM; next++) {
Better to
for (next = reglist; ...) {
> + switch (next->type & OV5648_TOK_MASK) {
> + case OV5648_TOK_DELAY:
> + err = __ov5648_flush_reg_array(client,
> &ctrl);
> + if (err)
> + return err;
> + msleep(next->val);
Oy vey, how can you guarantee that this will not be long enough to make
user experience awful?
> + break;
> + default:
> + /*
> + * If next address is not consecutive, data
> needs to be
> + * flushed before proceed.
> + */
> + if
> (!__ov5648_write_reg_is_consecutive(client, &ctrl,
> + next)
> ) {
> + err =
> __ov5648_flush_reg_array(client, &ctrl);
> + if (err)
> + return err;
> + }
> + err = __ov5648_buf_reg_array(client, &ctrl,
> next);
> + if (err) {
> + dev_err(&client->dev, "%s: write
> error, aborted\n",
> + __func__);
> + return err;
> + }
> + break;
> + }
> + }
> +
> + return __ov5648_flush_reg_array(client, &ctrl);
> +}
+ empty line.
> +static int ov5648_g_focal(struct v4l2_subdev *sd, s32 *val)
> +{
> + *val = (OV5648_FOCAL_LENGTH_NUM << 16) |
> OV5648_FOCAL_LENGTH_DEM;
> + return 0;
> +}
> +
> +static int ov5648_g_fnumber(struct v4l2_subdev *sd, s32 *val)
> +{
> + /*const f number for imx*/
Bad style.
> + *val = (OV5648_F_NUMBER_DEFAULT_NUM << 16) |
> OV5648_F_NUMBER_DEM;
> + return 0;
> +}
> +static int ov5648_get_intg_factor(struct i2c_client *client,
> + struct camera_mipi_info *info,
> + const struct ov5648_resolution *res)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + struct atomisp_sensor_mode_data *buf = &info->data;
> + unsigned int pix_clk_freq_hz;
> + u16 reg_val;
> + int ret;
> +
> + if (!info)
> + return -EINVAL;
> +
> + /* pixel clock */
Isn't it obvious from the code?
> + pix_clk_freq_hz = res->pix_clk_freq * 1000000;
> +
> + dev->vt_pix_clk_freq_mhz = pix_clk_freq_hz;
> + buf->vt_pix_clk_freq_mhz = pix_clk_freq_hz;
> +
> + /* get integration time */
Ditto.
> + buf->coarse_integration_time_min =
> OV5648_COARSE_INTG_TIME_MIN;
> + buf->coarse_integration_time_max_margin =
> + OV5648_COARSE_INTG_TIME_MAX_MARGIN;
> +
> + buf->fine_integration_time_min = OV5648_FINE_INTG_TIME_MIN;
> + buf->fine_integration_time_max_margin =
> + OV5648_FINE_INTG_TIME_MAX_MARGIN;
> +
> + buf->fine_integration_time_def = OV5648_FINE_INTG_TIME_MIN;
> + buf->frame_length_lines = res->lines_per_frame;
> + buf->line_length_pck = res->pixels_per_line;
> + buf->read_mode = res->bin_mode;
> +
> + /* get the cropping and output resolution to ISP for this
> mode. */
>
Style of comments.
Make them consistent over the code and be following the code-style
rules.
> +}
> + // EXPOSURE CONTROL DISABLED FOR INITIAL CHECKIN, TUNING
> DOESN'T WORK
Huh?
This style of comments should not be in upstream code.
> + return ov5648_set_exposure(sd, exp, gain, digitgain);
> +}
> +err:
> + return ret;
In above like cases err: label is redundant.
> +}
> +static int ov5648_h_flip(struct v4l2_subdev *sd, s32 value)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + int ret;
> + u16 val;
+ empty line.
> + dev_dbg(&client->dev, "@%s: value:%d\n", __func__, value);
Please, remove __func__ from all dev_dbg() and pr_debug() calls.
Dynamic debug can do it for you.
Moreover, if you wish to do better debug, switch to trace points.
> +static int ov5648_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct ov5648_device *dev = container_of(ctrl->handler,
> + struct ov5648_device, ctrl_handler);
> + int ret = 0;
Redundant assignment. Check the rest of the code for it and remove where
it's not needed. Otherwise it might hide a potential error.
> +
> + switch (ctrl->id) {
> + case V4L2_CID_EXPOSURE_ABSOLUTE:
> + ret = ov5648_q_exposure(&dev->sd, &ctrl->val);
> + break;
> + case V4L2_CID_FOCAL_ABSOLUTE:
> + ret = ov5648_g_focal(&dev->sd, &ctrl->val);
> + break;
> + case V4L2_CID_FNUMBER_ABSOLUTE:
> + ret = ov5648_g_fnumber(&dev->sd, &ctrl->val);
> + break;
> + case V4L2_CID_FNUMBER_RANGE:
> + ret = ov5648_g_fnumber_range(&dev->sd, &ctrl->val);
> + break;
> + case V4L2_CID_BIN_FACTOR_HORZ:
> + ret = ov5648_g_bin_factor_x(&dev->sd, &ctrl->val);
> + break;
> + case V4L2_CID_BIN_FACTOR_VERT:
> + ret = ov5648_g_bin_factor_y(&dev->sd, &ctrl->val);
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +#if 1
WTF?
> +/*
> + *Camera driver need to load AWB calibration data
> + *stored in OTP and write to gain registers after
> + *initialization of register settings.
> + * index: index of otp group. (1, 2, 3)
> + * return: 0, group index is empty
> + * 1, group index has invalid data
> + * 2, group index has valid data
> + */
> +static int check_otp(struct i2c_client *client, int index)
> +{
> + int i;
> + u16 flag = 0, rg = 0, bg = 0;
> + if (index == 1) {
> + /* read otp --Bank 0 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d05, &flag);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d07, &rg);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d08, &bg);
> + } else if (index == 2) {
> + /* read otp --Bank 0 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d0e, &flag);
> +
> + /* read otp --Bank 1 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d00, &rg);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d01, &bg);
> + } else if (index == 3) {
> + /* read otp --Bank 1 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d07, &flag);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d09, &rg);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d0a, &bg);
> + }
> +
> + flag = flag & 0x80;
> +
> + /* clear otp buffer */
> + for (i = 0; i < 16; i++)
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d00 + i,
> 0x00);
> +
> + if (flag)
> + return 1;
> + else {
> + if (rg == 0 && bg == 0)
> + return 0;
> + else
> + return 2;
> + }
> +
> +}
> +
> +/* index: index of otp group. (1, 2, 3)
> + * return: 0,
> + */
> +static int read_otp(struct i2c_client *client,
> + int index, struct otp_struct *otp_ptr)
> +{
> + int i;
> + u16 temp;
> + /* read otp into buffer */
> + if (index == 1) {
> + /* read otp --Bank 0 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d05, &((*otp_ptr).module_integrator_id));
> + (*otp_ptr).module_integrator_id =
> + (*otp_ptr).module_integrator_id & 0x7f;
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d06, &((*otp_ptr).lens_id));
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d0b, &temp);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d07, &((*otp_ptr).rg_ratio));
> + (*otp_ptr).rg_ratio =
> + ((*otp_ptr).rg_ratio<<2) + ((temp>>6) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d08, &((*otp_ptr).bg_ratio));
> + (*otp_ptr).bg_ratio =
> + ((*otp_ptr).bg_ratio<<2) + ((temp>>4) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0c, &((*otp_ptr).light_rg));
> + (*otp_ptr).light_rg =
> + ((*otp_ptr).light_rg<<2) + ((temp>>2) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0d, &((*otp_ptr).light_bg));
> + (*otp_ptr).light_bg =
> + ((*otp_ptr).light_bg<<2) + (temp & 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d09, &((*otp_ptr).user_data[0]));
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0a, &((*otp_ptr).user_data[1]));
> + } else if (index == 2) {
> + /* read otp --Bank 0 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0e, &((*otp_ptr).module_integrator_id));
> + (*otp_ptr).module_integrator_id =
> + (*otp_ptr).module_integrator_id & 0x7f;
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0f, &((*otp_ptr).lens_id));
> + /* read otp --Bank 1 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d04, &temp);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d00, &((*otp_ptr).rg_ratio));
> + (*otp_ptr).rg_ratio =
> + ((*otp_ptr).rg_ratio<<2) + ((temp>>6) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d01, &((*otp_ptr).bg_ratio));
> + (*otp_ptr).bg_ratio =
> + ((*otp_ptr).bg_ratio<<2) + ((temp>>4) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d05, &((*otp_ptr).light_rg));
> + (*otp_ptr).light_rg =
> + ((*otp_ptr).light_rg<<2) + ((temp>>2) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d06, &((*otp_ptr).light_bg));
> + (*otp_ptr).light_bg =
> + ((*otp_ptr).light_bg<<2) + (temp & 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d02, &((*otp_ptr).user_data[0]));
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d03, &((*otp_ptr).user_data[1]));
> + } else if (index == 3) {
> + /* read otp --Bank 1 */
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> + mdelay(5);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d07, &((*otp_ptr).module_integrator_id));
> + (*otp_ptr).module_integrator_id =
> + (*otp_ptr).module_integrator_id & 0x7f;
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d08, &((*otp_ptr).lens_id));
> + ov5648_read_reg(client, OV5648_8BIT, 0x3d0d, &temp);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d09, &((*otp_ptr).rg_ratio));
> + (*otp_ptr).rg_ratio =
> + ((*otp_ptr).rg_ratio<<2) + ((temp>>6) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0a, &((*otp_ptr).bg_ratio));
> + (*otp_ptr).bg_ratio =
> + ((*otp_ptr).bg_ratio<<2) + ((temp>>4) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0e, &((*otp_ptr).light_rg));
> + (*otp_ptr).light_rg =
> + ((*otp_ptr).light_rg<<2) + ((temp>>2) &
> 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0f, &((*otp_ptr).light_bg));
> + (*otp_ptr).light_bg =
> + ((*otp_ptr).light_bg<<2) + (temp & 0x03);
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0b, &((*otp_ptr).user_data[0]));
> + ov5648_read_reg(client, OV5648_8BIT,
> + 0x3d0c, &((*otp_ptr).user_data[1]));
> + }
> + /* clear otp buffer */
> + for (i = 0; i < 16; i++)
> + ov5648_write_reg(client, OV5648_8BIT, 0x3d00 + i,
> 0x00);
> +
> + return 0;
> +}
> +/* R_gain, sensor red gain of AWB, 0x400 =1
> + * G_gain, sensor green gain of AWB, 0x400 =1
> + * B_gain, sensor blue gain of AWB, 0x400 =1
> + * return 0;
> + */
> +static int update_awb_gain(struct v4l2_subdev *sd)
> +{
> +
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + int R_gain = dev->current_otp.R_gain;
> + int G_gain = dev->current_otp.G_gain;
> + int B_gain = dev->current_otp.B_gain;
> + if (R_gain > 0x400) {
> + ov5648_write_reg(client, OV5648_8BIT, 0x5186,
> R_gain>>8);
> + ov5648_write_reg(client, OV5648_8BIT, 0x5187, R_gain
> & 0x00ff);
> + }
> + if (G_gain > 0x400) {
> + ov5648_write_reg(client, OV5648_8BIT, 0x5188,
> G_gain>>8);
> + ov5648_write_reg(client, OV5648_8BIT, 0x5189, G_gain
> & 0x00ff);
> + }
> + if (B_gain > 0x400) {
> + ov5648_write_reg(client, OV5648_8BIT, 0x518a,
> B_gain>>8);
> + ov5648_write_reg(client, OV5648_8BIT, 0x518b, B_gain
> & 0x00ff);
> + }
> + #ifdef OV5648_DEBUG_EN
> + dev_dbg(&client->dev, "_ov5648_: %s : rgain:%x ggain:%x
> bgain:%x\n", __func__, R_gain, G_gain, B_gain);
> + #endif
> + return 0;
> +}
> +
> +/* call this function after OV5648 initialization
> + * return: 0 update success
> + * 1, no OTP
> + */
> +static int update_otp(struct v4l2_subdev *sd)
> +{
> + struct otp_struct current_otp;
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + int i, ret;
> + int otp_index;
> + u16 temp;
> + int R_gain, G_gain, B_gain, G_gain_R, G_gain_B;
> + u16 rg = 1, bg = 1;
> +
> + //otp valid after mipi on and sw stream on
> + ov5648_write_reg(client, OV5648_8BIT, OV5648_SW_STREAM,
> OV5648_START_STREAMING);
> +
> + /* R/G and B/G of current camera module is read out from
> sensor OTP
> + * check first OTP with valid data
> + */
> + for (i = 1; i <= 3; i++) {
> + temp = check_otp(client, i);
> + if (temp == 2) {
> + otp_index = i;
> + break;
> + }
> + }
> + if (i > 3) {
> + printk(KERN_INFO"@%s: no valid wb otp data\n",
> __func__);
> + /* no valid wb OTP data */
> + return 1;
> + }
> + read_otp(client, otp_index, ¤t_otp);
> + if (current_otp.light_rg == 0) {
> + /* no light source information in OTP */
> + rg = current_otp.rg_ratio;
> + } else {
> + /* light source information found in OTP */
> + rg = current_otp.rg_ratio * (current_otp.light_rg +
> 512) / 1024;
> + }
> + if (current_otp.light_bg == 0) {
> + /* no light source information in OTP */
> + bg = current_otp.bg_ratio;
> + } else {
> + /* light source information found in OTP */
> + bg = current_otp.bg_ratio * (current_otp.light_bg +
> 512) / 1024;
> + }
> + #ifdef OV5648_DEBUG_EN
> + dev_dbg(&client->dev, "_ov5648_: %s : rg:%x bg:%x\n",
> __func__, rg, bg);
> + #endif
> + if (rg == 0)
> + rg = 1;
> + if (bg == 0)
> + bg = 1;
> + /*calculate G gain
> + *0x400 = 1x gain
> + */
> + if (bg < BG_Ratio_Typical) {
> + if (rg < RG_Ratio_Typical) {
> + /* current_otp.bg_ratio < BG_Ratio_typical &&
> + * current_otp.rg_ratio < RG_Ratio_typical
> + */
> + G_gain = 0x400;
> + B_gain = 0x400 * BG_Ratio_Typical / bg;
> + R_gain = 0x400 * RG_Ratio_Typical / rg;
> + } else {
> + /* current_otp.bg_ratio < BG_Ratio_typical &&
> + * current_otp.rg_ratio >= RG_Ratio_typical
> + */
> + R_gain = 0x400;
> + G_gain = 0x400 * rg / RG_Ratio_Typical;
> + B_gain = G_gain * BG_Ratio_Typical / bg;
> + }
> + } else {
> + if (rg < RG_Ratio_Typical) {
> + /* current_otp.bg_ratio >= BG_Ratio_typical
> &&
> + * current_otp.rg_ratio < RG_Ratio_typical
> + */
> + B_gain = 0x400;
> + G_gain = 0x400 * bg / BG_Ratio_Typical;
> + R_gain = G_gain * RG_Ratio_Typical / rg;
> + } else {
> + /* current_otp.bg_ratio >= BG_Ratio_typical
> &&
> + * current_otp.rg_ratio >= RG_Ratio_typical
> + */
> + G_gain_B = 0x400 * bg / BG_Ratio_Typical;
> + G_gain_R = 0x400 * rg / RG_Ratio_Typical;
> + if (G_gain_B > G_gain_R) {
> + B_gain = 0x400;
> + G_gain = G_gain_B;
> + R_gain = G_gain * RG_Ratio_Typical /
> rg;
> + } else {
> + R_gain = 0x400;
> + G_gain = G_gain_R;
> + B_gain = G_gain * BG_Ratio_Typical /
> bg;
> + }
> + }
> + }
> +
> + dev->current_otp.R_gain = R_gain;
> + dev->current_otp.G_gain = G_gain;
> + dev->current_otp.B_gain = B_gain;
> +
> + ret = ov5648_write_reg(client, OV5648_8BIT,
> + OV5648_SW_STREAM, OV5648_STOP_STREAMING);
> + return ret ;
> +}
> +
> +#endif
> +
> +static int power_ctrl(struct v4l2_subdev *sd, bool flag)
> +{
> + int ret = 0;
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + if (!dev || !dev->platform_data)
> + return -ENODEV;
> +
> + /* Non-gmin platforms use the legacy callback */
> + if (dev->platform_data->power_ctrl)
> + return dev->platform_data->power_ctrl(sd, flag);
> +
> + if (flag) {
> + ret |= dev->platform_data->v1p8_ctrl(sd, 1);
> + ret |= dev->platform_data->v2p8_ctrl(sd, 1);
> + usleep_range(10000, 15000);
> + }
> +
> + if (!flag || ret) {
> + ret |= dev->platform_data->v1p8_ctrl(sd, 0);
> + ret |= dev->platform_data->v2p8_ctrl(sd, 0);
> + }
> + return ret;
> +}
> +
> +static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
> +{
> + int ret;
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
Better to use reversed xmas tree order in such blocks.
> +
> + if (!dev || !dev->platform_data)
> + return -ENODEV;
> +
When it's the case?
> + /* Non-gmin platforms use the legacy callback */
> + if (dev->platform_data->gpio_ctrl)
> + return dev->platform_data->gpio_ctrl(sd, flag);
What the platforms? Are they sold in the open market?
> +
> + /* GPIO0 == "RESETB", GPIO1 == "PWDNB", named in opposite
> + * senses but with the same behavior: both must be high for
> + * the device to opperate */
> + if (flag) {
> + ret = dev->platform_data->gpio0_ctrl(sd, 1);
> + usleep_range(10000, 15000);
> + ret |= dev->platform_data->gpio1_ctrl(sd, 1);
> + usleep_range(10000, 15000);
> + } else {
> + ret = dev->platform_data->gpio1_ctrl(sd, 0);
> + ret |= dev->platform_data->gpio0_ctrl(sd, 0);
> + }
> + return ret;
> +}
> +
> +static int power_up(struct v4l2_subdev *sd)
> +{
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + int ret;
> +
> + dev_dbg(&client->dev, "@%s:\n", __func__);
> + if (!dev->platform_data) {
> + dev_err(&client->dev,
> + "no camera_sensor_platform_data");
> + return -ENODEV;
> + }
> +
> + /* power control */
> + ret = power_ctrl(sd, 1);
> + if (ret)
> + goto fail_power;
> +
> + /* according to DS, at least 5ms is needed between DOVDD and
> PWDN */
> + usleep_range(5000, 6000);
> +
> + /* gpio ctrl */
> + ret = gpio_ctrl(sd, 1);
> + if (ret) {
> + ret = gpio_ctrl(sd, 1);
> + if (ret)
> + goto fail_power;
> + }
> +
> + /* flis clock control */
> + ret = dev->platform_data->flisclk_ctrl(sd, 1);
> + if (ret)
> + goto fail_clk;
> +
> + /* according to DS, 20ms is needed between PWDN and i2c
> access */
> + msleep(20);
> +
> + return 0;
> +
> +fail_clk:
> + gpio_ctrl(sd, 0);
> +fail_power:
> + power_ctrl(sd, 0);
> + dev_err(&client->dev, "sensor power-up failed\n");
> +
> + return ret;
> +}
> +
> +static int power_down(struct v4l2_subdev *sd)
> +{
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + int ret = 0;
> +
> + h_flag = H_FLIP_DEFAULT;
> + v_flag = V_FLIP_DEFAULT;
> + dev_dbg(&client->dev, "@%s:\n", __func__);
> + if (!dev->platform_data) {
> + dev_err(&client->dev,
> + "no camera_sensor_platform_data");
> + return -ENODEV;
> + }
> +
> + ret = dev->platform_data->flisclk_ctrl(sd, 0);
> + if (ret)
> + dev_err(&client->dev, "flisclk failed\n");
> +
> + /* gpio ctrl */
> + ret = gpio_ctrl(sd, 0);
> + if (ret) {
> + ret = gpio_ctrl(sd, 0);
> + if (ret)
> + dev_err(&client->dev, "gpio failed 2\n");
> + }
> +
> + /* power control */
> + ret = power_ctrl(sd, 0);
> + if (ret)
> + dev_err(&client->dev, "vprog failed.\n");
> +
> + return ret;
> +}
For all above play around GPIO you need to register a voltage regulator
and use regulator framework.
> +#define LARGEST_ALLOWED_RATIO_MISMATCH 900
> +static int distance(struct ov5648_resolution *res, u32 w, u32 h)
> +{
> + unsigned int w_ratio = ((res->width << 13) / w);
Redundant parens.
> + unsigned int h_ratio;
> + int match;
> +
> + if (h == 0)
> + return -1;
> + h_ratio = ((res->height << 13) / h);
Ditto.
> + if (h_ratio == 0)
> + return -1;
> + match = abs(((w_ratio << 13) / h_ratio) - ((int)8192));
Ditto.
> +
> + if ((w_ratio < (int)8192) || (h_ratio < (int)8192) ||
> + (match > LARGEST_ALLOWED_RATIO_MISMATCH))
> + return -1;
Why (int) casting here and above?!
> +
> + return w_ratio + h_ratio;
> +}
> +
> +/* Return the nearest higher resolution index */
> +static int nearest_resolution_index(int w, int h)
> +{
> + int i;
> + int idx = -1;
> + int dist;
> + int min_dist = INT_MAX;
> + struct ov5648_resolution *tmp_res = NULL;
Reversed xmas tree order.
> +
> + for (i = 0; i < N_RES; i++) {
> + tmp_res = &ov5648_res[i];
> + dist = distance(tmp_res, w, h);
> + if (dist == -1)
> + continue;
> + if (dist < min_dist) {
> + min_dist = dist;
> + idx = i;
> + }
> + }
> +
> + return idx;
> +}
>
> + id = ((((u16) high) << 8) | (u16) low);
Redundant parens. Please, check all lines to avoid such.
> +
>
> + revision = (u8) high & 0x0f;
> +
> + dev_dbg(&client->dev, "sensor_revision = 0x%x\n", revision);
> + dev_dbg(&client->dev, "detect ov5648 success\n");
It would be one line, moreover, instead of above, you may use
...("...%c...", hex_asc_lo[high]);
> + return 0;
> +}
> +
> +static int ov5648_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + int ret;
+ empty line.
Please check all functions.
> + dev_dbg(&client->dev, "@%s:\n", __func__);
Noise. Remove.
Do this for all similar cases.
> + mutex_lock(&dev->input_lock);
> +
> + ret = ov5648_write_reg(client, OV5648_8BIT, OV5648_SW_STREAM,
> + enable ? OV5648_START_STREAMING :
> + OV5648_STOP_STREAMING);
> +
> + mutex_unlock(&dev->input_lock);
> +
> + return ret;
> +}
> +static int ov5648_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ov5648_device *dev = to_ov5648_sensor(sd);
> + dev_dbg(&client->dev, "ov5648_remove...\n");
Noise, remove.
> +
> + dev->platform_data->csi_cfg(sd, 0);
> +
> + v4l2_device_unregister_subdev(sd);
> + media_entity_cleanup(&dev->sd.entity);
> + v4l2_ctrl_handler_free(&dev->ctrl_handler);
> + kfree(dev);
> +
> + return 0;
> +}
> +
> +static int ov5648_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct ov5648_device *dev;
> + size_t len = CAMERA_MODULE_ID_LEN * sizeof(char);
> + int ret;
> + void *pdata;
> + unsigned int i;
> +
> + dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> + if (!dev) {
> + dev_err(&client->dev, "out of memory\n");
> + return -ENOMEM;
> + }
> +
> + dev->camera_module = kzalloc(len, GFP_KERNEL);
> + if (!dev->camera_module) {
> + kfree(dev);
> + dev_err(&client->dev, "out of memory\n");
> + return -ENOMEM;
> + }
> +
> + mutex_init(&dev->input_lock);
> +
> + dev->fmt_idx = 0;
> + //otp functions
Wrong style, noisy comment. Remove.
> + dev->current_otp.otp_en = 1;// enable otp functions
Ditto.
> + v4l2_i2c_subdev_init(&(dev->sd), client, &ov5648_ops);
> +
> + if (gmin_get_config_var(&client->dev, "CameraModule",
> + dev->camera_module, &len)) {
> + kfree(dev->camera_module);
> + dev->camera_module = NULL;
> + dev_info(&client->dev, "Camera module id is
> missing\n");
> + }
> +
> + if (ACPI_COMPANION(&client->dev))
> + pdata = gmin_camera_platform_data(&dev->sd,
> + ATOMISP_INPUT_FORMA
> T_RAW_10,
> + atomisp_bayer_order
> _bggr);
> + else
> + pdata = client->dev.platform_data;
What kind of platforms will use platform_data?
> +out_free:
> + v4l2_device_unregister_subdev(&dev->sd);
Doesn't v4l2 have devm_*() helpers?
> + kfree(dev->camera_module);
> + kfree(dev);
Shouldn't those be devm_kzalloc() ?
> + return ret;
> +}
> +
> +static const struct acpi_device_id ov5648_acpi_match[] = {
> + {"XXOV5648"},
WTF is that?
> + {"INT5648"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, ov5648_acpi_match);
> +
> +MODULE_DEVICE_TABLE(i2c, ov5648_id);
Where is the table?
> +static struct i2c_driver ov5648_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
Redundant.
> + .name = OV5648_NAME,
> + .acpi_match_table = ACPI_PTR(ov5648_acpi_match),
> + },
> + .probe = ov5648_probe,
> + .remove = ov5648_remove,
> + .id_table = ov5648_id,
> +};
> +
> +static int init_ov5648(void)
> +{
> + return i2c_add_driver(&ov5648_driver);
> +}
> +
> +static void exit_ov5648(void)
> +{
> +
> + i2c_del_driver(&ov5648_driver);
> +}
> +
> +module_init(init_ov5648);
> +module_exit(exit_ov5648);
module_i2c_driver();
> +#ifndef __OV5648_H__
> +#define __OV5648_H__
+ empty line.
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +#include <linux/videodev2.h>
> +#include <linux/spinlock.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <linux/v4l2-mediabus.h>
> +#include <media/media-entity.h>
> +#include <linux/acpi.h>
> +#include "../include/linux/atomisp_platform.h"
Why? Are they all needed for definitions below?
I'm pretty sure you may leave only couple out of them.
> +
> +#define OV5648_NAME "ov5648"
Why it's here?
> +static const struct i2c_device_id ov5648_id[] = {
> + {OV5648_NAME, 0},
> + {}
> +};
WTF?! It shouldn't be in the header!
--
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy
