DT bindings document the property "ams,input-max-microamp" that limits the
chip's maximum input current. The driver and the DTS however used
"peak-current-limit" property. Fix this by using the property documented
in DT binding documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Acked-by: Pavel Machek <pavel@xxxxxx>
Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
---
arch/arm/boot/dts/omap3-n950-n9.dtsi | 2 +-
drivers/leds/leds-as3645a.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index cb47ae79a5f9..b86fc83a5a65 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -273,7 +273,7 @@
flash-timeout-us = <150000>;
flash-max-microamp = <320000>;
led-max-microamp = <60000>;
- peak-current-limit = <1750000>;
+ ams,input-max-microamp = <1750000>;
};
indicator {
led-max-microamp = <10000>;
diff --git a/drivers/leds/leds-as3645a.c b/drivers/leds/leds-as3645a.c
index bbbbe0898233..e3f89c6130d2 100644
--- a/drivers/leds/leds-as3645a.c
+++ b/drivers/leds/leds-as3645a.c
@@ -534,7 +534,7 @@ static int as3645a_parse_node(struct as3645a *flash,
of_property_read_u32(flash->flash_node, "voltage-reference",
&cfg->voltage_reference);
- of_property_read_u32(flash->flash_node, "peak-current-limit",
+ of_property_read_u32(flash->flash_node, "ams,input-max-microamp",
&cfg->peak);
cfg->peak = AS_PEAK_mA_TO_REG(cfg->peak);
--
2.11.0
