On 09/19/17 12:00, Sakari Ailus wrote:
> Hi Hans,
>
> On Tue, Sep 19, 2017 at 10:40:14AM +0200, Hans Verkuil wrote:
>> On 09/19/2017 10:20 AM, Sakari Ailus wrote:
>>> Hi Hans,
>>>
>>> Thank you for the review.
>>>
>>> On Tue, Sep 19, 2017 at 10:03:27AM +0200, Hans Verkuil wrote:
>>>> On 09/15/2017 04:17 PM, Sakari Ailus wrote:
> ...
>>>>> +static int __v4l2_async_notifier_parse_fwnode_endpoints(
>>>>> + struct device *dev, struct v4l2_async_notifier *notifier,
>>>>> + size_t asd_struct_size, unsigned int port, bool has_port,
>>>>> + int (*parse_endpoint)(struct device *dev,
>>>>> + struct v4l2_fwnode_endpoint *vep,
>>>>> + struct v4l2_async_subdev *asd))
>>>>> +{
>>>>> + struct fwnode_handle *fwnode = NULL;
>>>>> + unsigned int max_subdevs = notifier->max_subdevs;
>>>>> + int ret;
>>>>> +
>>>>> + if (WARN_ON(asd_struct_size < sizeof(struct v4l2_async_subdev)))
>>>>> + return -EINVAL;
>>>>> +
>>>>> + for (fwnode = NULL; (fwnode = fwnode_graph_get_next_endpoint(
>>>>> + dev_fwnode(dev), fwnode)); ) {
>>>>
>>>> You can replace this by:
>>>>
>>>> while ((fwnode = fwnode_graph_get_next_endpoint(dev_fwnode(dev), fwnode))) {
>>>>
>>>>> + if (!fwnode_device_is_available(
>>>>> + fwnode_graph_get_port_parent(fwnode)))
>>>>> + continue;
>>>>> +
>>>>> + if (has_port) {
>>>>> + struct fwnode_endpoint ep;
>>>>> +
>>>>> + ret = fwnode_graph_parse_endpoint(fwnode, &ep);
>>>>> + if (ret) {
>>>>> + fwnode_handle_put(fwnode);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + if (ep.port != port)
>>>>> + continue;
>>>>> + }
>>>>> + max_subdevs++;
>>>>> + }
>>>>> +
>>>>> + /* No subdevs to add? Return here. */
>>>>> + if (max_subdevs == notifier->max_subdevs)
>>>>> + return 0;
>>>>> +
>>>>> + ret = v4l2_async_notifier_realloc(notifier, max_subdevs);
>>>>> + if (ret)
>>>>> + return ret;
>>>>> +
>>>>> + for (fwnode = NULL; (fwnode = fwnode_graph_get_next_endpoint(
>>>>> + dev_fwnode(dev), fwnode)); ) {
>>>>
>>>> Same here: this can be a 'while'.
>>>
>>> The fwnode = NULL assignment still needs to be done. A for loop has a
>>> natural initialiser for the loop, I think it's cleaner than using while
>>> here.
>>
>> After the previous while fwnode is NULL again (since that's when the while
>> stops).
>>
>>>
>>> The macro would be implemented this way as well.
>>>
>>> For the loop above this one, I'd use for for consistency: it's the same
>>> loop after all.
>>>
>>> This reminds me --- I'll send the patch for the macro.
>>
>> If this is going to be replaced by a macro, then disregard my comment.
>
> Yes. I just sent that to linux-acpi (as well as devicetree and to you).
>
> ...
>
>>>>> +/**
>>>>> + * v4l2_async_notifier_parse_fwnode_endpoints - Parse V4L2 fwnode endpoints in a
>>>>> + * device node
>>>>> + * @dev: the device the endpoints of which are to be parsed
>>>>> + * @notifier: notifier for @dev
>>>>> + * @asd_struct_size: size of the driver's async sub-device struct, including
>>>>> + * sizeof(struct v4l2_async_subdev). The &struct
>>>>> + * v4l2_async_subdev shall be the first member of
>>>>> + * the driver's async sub-device struct, i.e. both
>>>>> + * begin at the same memory address.
>>>>> + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
>>>>> + * endpoint. Optional.
>>>>> + * Return: %0 on success
>>>>> + * %-ENOTCONN if the endpoint is to be skipped but this
>>>>> + * should not be considered as an error
>>>>> + * %-EINVAL if the endpoint configuration is invalid
>>>>> + *
>>>>> + * Parse the fwnode endpoints of the @dev device and populate the async sub-
>>>>> + * devices array of the notifier. The @parse_endpoint callback function is
>>>>> + * called for each endpoint with the corresponding async sub-device pointer to
>>>>> + * let the caller initialize the driver-specific part of the async sub-device
>>>>> + * structure.
>>>>> + *
>>>>> + * The notifier memory shall be zeroed before this function is called on the
>>>>> + * notifier.
>>>>> + *
>>>>> + * This function may not be called on a registered notifier and may be called on
>>>>> + * a notifier only once.
>>>>> + *
>>>>> + * Do not change the notifier's subdevs array, take references to the subdevs
>>>>> + * array itself or change the notifier's num_subdevs field. This is because this
>>>>> + * function allocates and reallocates the subdevs array based on parsing
>>>>> + * endpoints.
>>>>> + *
>>>>> + * The @struct v4l2_fwnode_endpoint passed to the callback function
>>>>> + * @parse_endpoint is released once the function is finished. If there is a need
>>>>> + * to retain that configuration, the user needs to allocate memory for it.
>>>>> + *
>>>>> + * Any notifier populated using this function must be released with a call to
>>>>> + * v4l2_async_notifier_release() after it has been unregistered and the async
>>>>> + * sub-devices are no longer in use, even if the function returned an error.
>>>>> + *
>>>>> + * Return: %0 on success, including when no async sub-devices are found
>>>>> + * %-ENOMEM if memory allocation failed
>>>>> + * %-EINVAL if graph or endpoint parsing failed
>>>>> + * Other error codes as returned by @parse_endpoint
>>>>> + */
>>>>> +int v4l2_async_notifier_parse_fwnode_endpoints(
>>>>> + struct device *dev, struct v4l2_async_notifier *notifier,
>>>>> + size_t asd_struct_size,
>>>>> + int (*parse_endpoint)(struct device *dev,
>>>>> + struct v4l2_fwnode_endpoint *vep,
>>>>> + struct v4l2_async_subdev *asd));
>>>>> +
>>>>> +/**
>>>>> + * v4l2_async_notifier_parse_fwnode_endpoints_by_port - Parse V4L2 fwnode
>>>>> + * endpoints of a port in a
>>>>> + * device node
>>>>> + * @dev: the device the endpoints of which are to be parsed
>>>>> + * @notifier: notifier for @dev
>>>>> + * @asd_struct_size: size of the driver's async sub-device struct, including
>>>>> + * sizeof(struct v4l2_async_subdev). The &struct
>>>>> + * v4l2_async_subdev shall be the first member of
>>>>> + * the driver's async sub-device struct, i.e. both
>>>>> + * begin at the same memory address.
>>>>> + * @port: port number where endpoints are to be parsed
>>>>> + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
>>>>> + * endpoint. Optional.
>>>>> + * Return: %0 on success
>>>>> + * %-ENOTCONN if the endpoint is to be skipped but this
>>>>> + * should not be considered as an error
>>>>> + * %-EINVAL if the endpoint configuration is invalid
>>>>> + *
>>>>> + * This function is just like @v4l2_async_notifier_parse_fwnode_endpoints with
>>>>> + * the exception that it only parses endpoints in a given port. This is useful
>>>>> + * on devices that have both sinks and sources: the async sub-devices connected
>>>>
>>>> on -> for
>>>>
>>>>> + * to sources have already been set up by another driver (on capture devices).
>>>>
>>>> on -> for
>>>
>>> Agreed on both.
>>>
>>>>
>>>> So if I understand this correctly for devices with both sinks and sources you use
>>>> this function to just parse the sink ports. And you have to give explicit port
>>>> numbers since you can't tell from parsing the device tree if a port is a sink or
>>>> source port, right? Only the driver knows this.
>>>
>>> Correct. The graph data structure in DT isn't directed, so this is only
>>> known by the driver.
>>
>> I think this should be clarified.
>>
>> I wonder if there is any way around it. I don't have time to dig into this, but
>> isn't it possible to tell that the source ports are already configured?
>
> Well, this is essentially what the documentation is attempting to convey.
> :-)
>
> I can add this / change the existing wording, if you think it could help.
Yes please. The documentation is just missing the little fact that the DT can't
tell the difference between a sink and source port, hence the driver has to be
explicit about which ports to parse in a case like this.
Regards,
Hans
