Re: [PATCH] Support HVR-1200 analog video as a clone of HVR-1500. Tested, composite and s-video inputs.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 17, 2017 at 5:42 PM, Nigel Kettlewell
<nigel.kettlewell@xxxxxxxxxxxxxx> wrote:
> I propose the following patch to support Hauppauge HVR-1200 analog video,
> nothing more than a clone of HVR-1500. Patch based on Linux 4.9 commit
> 69973b830859bc6529a7a0468ba0d80ee5117826
>
> I have tested composite and S-Video inputs.
>
> With the change, HVR-1200 devices have a /dev/video<n> entry which is
> accessible in the normal way.
>
> Let me know if you need anything more.

I'm not confident the tuner config for this board is correct.  The
HVR-1200 is much closer to the HVR-1250 as opposed to the HVR-1500,
and IIRC it didn't have an xc3028.

I don't dispute that with the patch in question the composite/s-video
are probably working ok, but I wouldn't recommend accepting this patch
as-is until the tuner is verified for DVB-T and analog (ideally both).

Can you provide the output of dmesg on device load?  If it's filled
with a bunch of errors showing xc3028 firmware load failures, that
would be a smoking gun that it doesn't have the xc3028.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux