Hi Folks, I have found a problem with the hauppauge wintv hvr 2200 on linux 2.6.32-rc7 x86-64. When I initialize the second tuner with tzap the first lose the FE_HAS_LOCK, and viceversa. Here is an example: tzap -a 1 "LA7(MBone)" using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' reading channels from file '/root/.tzap/channels.conf' tuning to 826000000 Hz video pid 0x0101, audio pid 0x0102 status 00 | signal d5d5 | snr 0044 | ber 0000ffff | unc 00000000 | status 1f | signal fdfd | snr 00d7 | ber 00000617 | unc 00000045 | FE_HAS_LOCK status 1f | signal fcfc | snr 00c6 | ber 0000094e | unc 00000000 | FE_HAS_LOCK status 1f | signal fafa | snr 00a8 | ber 000009db | unc 00000046 | FE_HAS_LOCK status 01 | signal 0000 | snr 0005 | ber 0000ffff | unc 00000000 | status 1f | signal fdfd | snr 00c6 | ber 000007d8 | unc 00000000 | FE_HAS_LOCK status 1f | signal fcfc | snr 00c6 | ber 00000750 | unc 00000000 | FE_HAS_LOCK status 1f | signal fcfc | snr 00d7 | ber 0000082c | unc 00000000 | FE_HAS_LOCK status 1f | signal fcfc | snr 00b9 | ber 00000898 | unc 00000000 | FE_HAS_LOCK 'status 01' happened when running 'tzap MTV'. I have discovered this behaviour while watching tv with both vlc and kaffeine: when one of the two application are opened or closed, the image is garbled for about 1 seconds. Any feedback are welcome. TIA This is my full dmesg: Linux version 2.6.32-rc7 (root@Challenger) (gcc version 4.3.3 (GCC) ) #1 SMP Sat Nov 14 17:48:19 CET 2009 Command line: BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e400 (usable) BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfe90000 (usable) BIOS-e820: 00000000bfe90000 - 00000000bfee3000 (ACPI NVS) BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.5 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x140000 max_arch_pfn = 0x400000000 last_pfn = 0xbfe90 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bfe90000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bfe90000 page 4k kernel direct mapping tables up to bfe90000 @ 10000-15000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 13000-19000 ACPI: RSDP 00000000000f8b10 00014 (v00 IntelR) ACPI: RSDT 00000000bfee3000 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 00000000bfee3080 00084 (v02 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 00000000bfee3140 041F1 (v01 INTELR AWRDACPI 00001000 MSFT 03000000) ACPI: FACS 00000000bfe90000 00040 ACPI: HPET 00000000bfee7400 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098) ACPI: MCFG 00000000bfee7440 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 00000000bfee7340 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: SSDT 00000000bfee7ae0 00590 (v01 PmRef CpuPm 00003000 INTL 20050309) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00013a6498] TEXT DATA BSS ==> [0001000000 - 00013a6498] #3 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] #4 [00013a7000 - 00013a7110] BRK ==> [00013a7000 - 00013a7110] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000bfe90 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1048094 DMA zone: 56 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3821 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767688 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880028200000 s70488 r8192 d23720 u1048576 pcpu-alloc: s70488 r8192 d23720 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030069 Kernel command line: BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4057888k/5242880k available (2083k kernel code, 1050504k absent, 133588k reserved, 895k data, 340k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:320 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 3327.688 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6655.37 BogoMIPS (lpj=3327688) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Freeing SMP alternatives: 19k freed ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6655.39 BogoMIPS (lpj=3327697) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (13310.77 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 003f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 000f) pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf51f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffd000-0xfdffd7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] pci 0000:01:00.0: reg 24 io port: [0xbf00-0xbf7f] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfd000000-0xfd3fffff] pci 0000:03:00.0: reg 18 64bit mmio: [0xfcc00000-0xfcffffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 pci 0000:03:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0x9000-0x9fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfcc00000-0xfd3fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfd600000-0xfd6fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] pci 0000:05:00.0: reg 10 io port: [0xce00-0xceff] pci 0000:05:00.0: reg 18 64bit mmio: [0xfddff000-0xfddfffff] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xfdcf0000-0xfdcfffff] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x8000-0x8fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x297 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:0b: ioport range 0x400-0x4bf could not be reserved system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved system 00:0e: iomem range 0xf0000-0xfffff could not be reserved system 00:0e: iomem range 0xbff00000-0xbfffffff could not be reserved system 00:0e: iomem range 0xfed00000-0xfed000ff has been reserved system 00:0e: iomem range 0xbfe90000-0xbfefffff could not be reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0x100000-0xbfe8ffff could not be reserved system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0e: iomem range 0xfed13000-0xfed1ffff has been reserved system 00:0e: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0e: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved system 00:0e: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xb000-0xbfff pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0xa000-0xafff pci 0000:00:1c.0: MEM window: 0xfdb00000-0xfdbfffff pci 0000:00:1c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x9000-0x9fff pci 0000:00:1c.2: MEM window: 0xfcc00000-0xfd3fffff pci 0000:00:1c.2: PREFETCH window: 0x000000fd700000-0x000000fd7fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: 0xd000-0xdfff pci 0000:00:1c.4: MEM window: 0xfd600000-0xfd6fffff pci 0000:00:1c.4: PREFETCH window: 0x000000fde00000-0x000000fdefffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: 0xc000-0xcfff pci 0000:00:1c.5: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:1c.5: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0x8000-0x8fff pci 0000:00:1e.0: MEM window: 0xfda00000-0xfdafffff pci 0000:00:1e.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff] pci_bus 0000:02: resource 2 pref mem [0xfd800000-0xfd8fffff] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff] pci_bus 0000:03: resource 1 mem: [0xfcc00000-0xfd3fffff] pci_bus 0000:03: resource 2 pref mem [0xfd700000-0xfd7fffff] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] pci_bus 0000:04: resource 1 mem: [0xfd600000-0xfd6fffff] pci_bus 0000:04: resource 2 pref mem [0xfde00000-0xfdefffff] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] pci_bus 0000:05: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:05: resource 2 pref mem [0xfdc00000-0xfdcfffff] pci_bus 0000:06: resource 0 io: [0x8000-0x8fff] pci_bus 0000:06: resource 1 mem: [0xfda00000-0xfdafffff] pci_bus 0000:06: resource 2 pref mem [0xfd900000-0xfd9fffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 7927 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 29 ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 29 ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 29 ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 29 ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 29 ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 29 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST31000528AS, CC36, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC36 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 VFS: Mounted root (xfs filesystem) readonly on device 8:2. Freeing unused kernel memory: 340k freed sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:05:00.0: setting latency timer to 64 r8169 0000:05:00.0: irq 30 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc9001059e000, 00:01:29:a7:66:0b, XID 1c4000c0 IRQ 30 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (28 C) ACPI: SSDT 00000000bfee74c0 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20050309) processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 00000000bfee7980 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20050309) processor LNXCPU:01: registered as cooling_device1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 fan PNP0C0B:00: registered as cooling_device2 ACPI: Fan [FAN] (on) ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 saa7164 driver loaded saa7164 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 CORE saa7164[0]: subsystem: 0070:8980, board: Hauppauge WinTV-HVR2200 [card=4,autodetected] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 18, latency: 0, mmio: 0xfd000000 saa7164 0000:03:00.0: setting latency timer to 64 IRQ 18/saa7164[0]: IRQF_DISABLED is not guaranteed on shared IRQs ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-rc7 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-rc7 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 saa7164_downloadfirmware() no first image saa7164_downloadfirmware() Waiting for firmware upload (v4l-saa7164-1.0.3.fw) saa7164 0000:03:00.0: firmware: requesting v4l-saa7164-1.0.3.fw nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint uhci_hcd: USB Universal Host Controller Interface driver nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT 2009 hda_codec: ALC889A: BIOS auto-probing. uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-rc7 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-rc7 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-rc7 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32-rc7 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32-rc7 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32-rc7 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected saa7164_downloadfirmware() firmware read 3978608 bytes. saa7164_downloadfirmware() firmware loaded. Firmware file header part 1: .FirmwareSize = 0x0 .BSLSize = 0x0 .Reserved = 0x3d0d4 .Version = 0x3 saa7164_downloadfirmware() SecBootLoader.FileSize = 3978608 saa7164_downloadfirmware() FirmwareSize = 0x1fd6 saa7164_downloadfirmware() BSLSize = 0x0 saa7164_downloadfirmware() Reserved = 0x0 saa7164_downloadfirmware() Version = 0x11cdb usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: New USB device found, idVendor=046d, idProduct=c03e usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB-PS/2 Optical Mouse usb 3-2: Manufacturer: Logitech usb 3-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3 generic-usb 0003:046D:C03E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver saa7164_downloadimage() Image downloaded, booting... saa7164_downloadimage() Image booted successfully. starting firmware download(2) saa7164_downloadimage() Image downloaded, booting... saa7164_downloadimage() Image booted successfully. firmware download complete. tveeprom 1-0000: Hauppauge model 89619, rev D2F2, serial# 6276906 tveeprom 1-0000: MAC address is 00-0D-FE-5F-C7-2A tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4) tveeprom 1-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) tveeprom 1-0000: audio processor is SAA7164 (idx 43) tveeprom 1-0000: decoder processor is SAA7164 (idx 40) tveeprom 1-0000: has radio saa7164[0]: Hauppauge eeprom: model=89619 tda18271 2-0060: creating new instance TDA18271HD/C2 detected @ 2-0060 DVB: registering new adapter (saa7164) DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... tda18271 3-0060: creating new instance TDA18271HD/C2 detected @ 3-0060 tda18271: performing RF tracking filter calibration tda18271: RF tracking filter calibration complete DVB: registering new adapter (saa7164) DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)... r8169: eth0: link down usb 1-3: new high speed USB device using ehci_hcd and address 3 usb 1-3: New USB device found, idVendor=13fe, idProduct=1e23 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: STORE N GO usb 1-3: Manufacturer: Verbatim usb 1-3: SerialNumber: 07771F8004DB usb 1-3: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning scsi 6:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] 16119808 512-byte logical blocks: (8.25 GB/7.68 GiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through usb-storage: device scan complete sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Attached SCSI removable disk tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... saa7164 0000:03:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw tda10048_firmware_upload: firmware read 24878 bytes. tda10048_firmware_upload: firmware uploading tda10048_firmware_upload: firmware uploaded tda18271: performing RF tracking filter calibration tda18271: RF tracking filter calibration complete tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... saa7164 0000:03:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw tda10048_firmware_upload: firmware read 24878 bytes. tda10048_firmware_upload: firmware uploading tda10048_firmware_upload: firmware uploaded tda18271: performing RF tracking filter calibration tda18271: RF tracking filter calibration complete _________________________________________________________________ Windows Live: Make it easier for your friends to see what you’re up to on Facebook. http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_2:092009-- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
