From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Thu, 14 Sep 2017 16:26:42 +0200
Add a jump target so that a bit of exception handling can be better reused
in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/media/usb/tm6000/tm6000-cards.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 72dd6b80394f..502e0b38b7f1 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -872,15 +872,14 @@ int tm6000_cards_setup(struct tm6000_core *dev)
for (i = 0; i < 2; i++) {
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x00);
- if (rc < 0) {
- printk(KERN_ERR "Error %i doing tuner reset\n", rc);
- return rc;
- }
+ if (rc < 0)
+ goto report_failure;
msleep(10); /* Just to be conservative */
rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->gpio.tuner_reset, 0x01);
if (rc < 0) {
+report_failure:
printk(KERN_ERR "Error %i doing tuner reset\n", rc);
return rc;
}
--
2.14.1
