Hi! Am Freitag, den 13.11.2009, 12:23 +0200 schrieb rulet1@xxxxxxx: > Here is dmesg of analog (only analog, with FM-tuner) AverMedia Super 007 > when tvtime is running: [snip] > [ 11.549190] Linux video capture interface: v2.00 > [ 12.409456] saa7130/34: v4l2 driver version 0.2.15 loaded > [ 12.409531] saa7134 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> > IRQ 18 > [ 12.409543] saa7133[0]: found at 0000:04:02.0, rev: 209, irq: 18, > latency: 64, mmio: 0xfebff800 > [ 12.409554] saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure > analog (M135A) [card=149,autodetected] > [ 12.409579] saa7133[0]: board init: gpio is 40000 > [ 12.409691] input: saa7134 IR (Avermedia PCI pure as > /devices/pci0000:00/0000:00:1e.0/0000:04:02.0/input/input6 > [ 12.409773] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on > shared IRQs > [ 12.560015] saa7133[0]: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 > 1c 55 d2 b2 92 > [ 12.560034] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff > ff ff ff ff ff > [ 12.560050] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 > 56 ff ff ff ff > [ 12.560066] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560082] saa7133[0]: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff > ff ff ff ff ff > [ 12.560098] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560117] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560130] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560144] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560158] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560171] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560185] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560199] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560212] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560226] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560240] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff > [ 12.560256] i2c-adapter i2c-0: Invalid 7-bit address 0x7a > [ 13.316153] tuner 0-004b: chip found @ 0x96 (saa7133[0]) > [ 13.400020] tda829x 0-004b: setting tuner address to 60 > [ 13.596016] tda829x 0-004b: type set to tda8290+75a [...] > [ 17.540609] saa7133[0]: registered device video0 [v4l2] > [ 17.540656] saa7133[0]: registered device vbi0 > [ 17.540703] saa7133[0]: registered device radio0 > [ 17.541109] CA0106 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 > [ 17.541161] snd-ca0106: Model 1013 Rev 00000000 Serial 10131102 > [ 17.640654] saa7134 ALSA driver for DMA sound loaded > [ 17.640672] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on > shared IRQs > [ 17.640717] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered > as card -2 That one came in over Mauro and he added the NEC gpio remote support. http://linuxtv.org/hg/v4l-dvb/rev/fa0de4f2637a If you are in Russia, you likely have to use "options saa7134 secam=DK" or modprobe the driver with that. Please read the output of "modinfo saa7134". Enable audio_debug=1 for saa7134. echo 1 > /sys/module/saa7134/parameters/audio_debug If you switch the TV app to SECAM it should start to detect the DK audio carriers. Please report if this should still fail, since I can't test it myself. You see it in dmesg. Also I can see in the Avermedia user manual that it has only analog audio in but no out. You are forced to use saa7134-alsa dma sound. Hope this helps. Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
