Use tabs in Kconfig for indentation rather than spaces.
The patch has been created using the following command:
find drivers/staging/media/atomisp/ -name Kconfig| \
xargs perl -i -pe 's/ {8}/\t/g'
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/staging/media/atomisp/Kconfig | 10 ++--
drivers/staging/media/atomisp/i2c/Kconfig | 70 ++++++++++++------------
drivers/staging/media/atomisp/i2c/ov5693/Kconfig | 8 +--
3 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig
index 8eb13c3..52b86b7 100644
--- a/drivers/staging/media/atomisp/Kconfig
+++ b/drivers/staging/media/atomisp/Kconfig
@@ -1,9 +1,9 @@
menuconfig INTEL_ATOMISP
- bool "Enable support to Intel MIPI camera drivers"
- depends on X86 && EFI && MEDIA_CONTROLLER && PCI && ACPI
- help
- Enable support for the Intel ISP2 camera interfaces and MIPI
- sensor drivers.
+ bool "Enable support to Intel MIPI camera drivers"
+ depends on X86 && EFI && MEDIA_CONTROLLER && PCI && ACPI
+ help
+ Enable support for the Intel ISP2 camera interfaces and MIPI
+ sensor drivers.
if INTEL_ATOMISP
source "drivers/staging/media/atomisp/pci/Kconfig"
diff --git a/drivers/staging/media/atomisp/i2c/Kconfig b/drivers/staging/media/atomisp/i2c/Kconfig
index e628b5c..57505b7 100644
--- a/drivers/staging/media/atomisp/i2c/Kconfig
+++ b/drivers/staging/media/atomisp/i2c/Kconfig
@@ -9,85 +9,85 @@ config VIDEO_OV2722
tristate "OVT ov2722 sensor support"
depends on I2C && VIDEO_V4L2
---help---
- This is a Video4Linux2 sensor-level driver for the OVT
- OV2722 raw camera.
+ This is a Video4Linux2 sensor-level driver for the OVT
+ OV2722 raw camera.
- OVT is a 2M raw sensor.
+ OVT is a 2M raw sensor.
- It currently only works with the atomisp driver.
+ It currently only works with the atomisp driver.
config VIDEO_GC2235
tristate "Galaxy gc2235 sensor support"
depends on I2C && VIDEO_V4L2
---help---
- This is a Video4Linux2 sensor-level driver for the OVT
- GC2235 raw camera.
+ This is a Video4Linux2 sensor-level driver for the OVT
+ GC2235 raw camera.
- GC2235 is a 2M raw sensor.
+ GC2235 is a 2M raw sensor.
- It currently only works with the atomisp driver.
+ It currently only works with the atomisp driver.
config VIDEO_OV8858
tristate "Omnivision ov8858 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_ATOMISP
---help---
- This is a Video4Linux2 sensor-level driver for the Omnivision
- ov8858 RAW sensor.
+ This is a Video4Linux2 sensor-level driver for the Omnivision
+ ov8858 RAW sensor.
OV8858 is a 8M raw sensor.
- It currently only works with the atomisp driver.
+ It currently only works with the atomisp driver.
config VIDEO_MSRLIST_HELPER
tristate "Helper library to load, parse and apply large register lists."
depends on I2C
---help---
- This is a helper library to be used from a sensor driver to load, parse
- and apply large register lists.
+ This is a helper library to be used from a sensor driver to load, parse
+ and apply large register lists.
- To compile this driver as a module, choose M here: the
- module will be called libmsrlisthelper.
+ To compile this driver as a module, choose M here: the
+ module will be called libmsrlisthelper.
config VIDEO_MT9M114
tristate "Aptina mt9m114 sensor support"
depends on I2C && VIDEO_V4L2
---help---
- This is a Video4Linux2 sensor-level driver for the Micron
- mt9m114 1.3 Mpixel camera.
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt9m114 1.3 Mpixel camera.
- mt9m114 is video camera sensor.
+ mt9m114 is video camera sensor.
- It currently only works with the atomisp driver.
+ It currently only works with the atomisp driver.
config VIDEO_AP1302
tristate "AP1302 external ISP support"
depends on I2C && VIDEO_V4L2
select REGMAP_I2C
---help---
- This is a Video4Linux2 sensor-level driver for the external
- ISP AP1302.
+ This is a Video4Linux2 sensor-level driver for the external
+ ISP AP1302.
- AP1302 is an exteral ISP.
+ AP1302 is an exteral ISP.
- It currently only works with the atomisp driver.
+ It currently only works with the atomisp driver.
config VIDEO_GC0310
tristate "GC0310 sensor support"
- depends on I2C && VIDEO_V4L2
- ---help---
- This is a Video4Linux2 sensor-level driver for the Galaxycore
- GC0310 0.3MP sensor.
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Galaxycore
+ GC0310 0.3MP sensor.
config VIDEO_OV2680
tristate "Omnivision OV2680 sensor support"
depends on I2C && VIDEO_V4L2
---help---
- This is a Video4Linux2 sensor-level driver for the Omnivision
- OV2680 raw camera.
+ This is a Video4Linux2 sensor-level driver for the Omnivision
+ OV2680 raw camera.
- ov2680 is a 2M raw sensor.
+ ov2680 is a 2M raw sensor.
- It currently only works with the atomisp driver.
+ It currently only works with the atomisp driver.
#
# Kconfig for flash drivers
@@ -97,10 +97,10 @@ config VIDEO_LM3554
tristate "LM3554 flash light driver"
depends on VIDEO_V4L2 && I2C
---help---
- This is a Video4Linux2 sub-dev driver for the LM3554
- flash light driver.
+ This is a Video4Linux2 sub-dev driver for the LM3554
+ flash light driver.
- To compile this driver as a module, choose M here: the
- module will be called lm3554
+ To compile this driver as a module, choose M here: the
+ module will be called lm3554
diff --git a/drivers/staging/media/atomisp/i2c/ov5693/Kconfig b/drivers/staging/media/atomisp/i2c/ov5693/Kconfig
index 9fb1bff..9e8d325 100644
--- a/drivers/staging/media/atomisp/i2c/ov5693/Kconfig
+++ b/drivers/staging/media/atomisp/i2c/ov5693/Kconfig
@@ -2,10 +2,10 @@ config VIDEO_OV5693
tristate "Omnivision ov5693 sensor support"
depends on I2C && VIDEO_V4L2
---help---
- This is a Video4Linux2 sensor-level driver for the Micron
- ov5693 5 Mpixel camera.
+ This is a Video4Linux2 sensor-level driver for the Micron
+ ov5693 5 Mpixel camera.
- ov5693 is video camera sensor.
+ ov5693 is video camera sensor.
- It currently only works with the atomisp driver.
+ It currently only works with the atomisp driver.
--
2.7.4
