On Wed, Aug 23, 2017 at 7:36 AM, Anders Eriksson <aeriksson2@xxxxxxxxx> wrote: > Hi, > > On a freshly booted rpi2, I got this in the logs (3rd line from bottom): > > [ 12.999134] em28xx 1-1.2.4.1:1.0: New device PCTV Systems PCTV 290e > @ 480 Mbps (2013:024f, interface 0, class 0) > [ 13.072265] em28xx 1-1.2.4.1:1.0: DVB interface 0 found: isoc > [ 13.082114] em28xx 1-1.2.4.1:1.0: chip ID is em28174 > [ 13.477093] em28xx 1-1.2.4.1:1.0: EEPROM ID = 26 00 01 00, EEPROM > hash = 0x11372abd > [ 13.491322] em28xx 1-1.2.4.1:1.0: EEPROM info: > [ 13.499089] em28xx 1-1.2.4.1:1.0: microcode start address = > 0x0004, boot configuration = 0x01 > [ 13.538392] em28xx 1-1.2.4.1:1.0: No audio on board. > [ 13.546833] em28xx 1-1.2.4.1:1.0: 500mA max power > [ 13.554815] em28xx 1-1.2.4.1:1.0: Table at offset 0x39, > strings=0x1aa0, 0x14ba, 0x1ace > [ 13.569346] em28xx 1-1.2.4.1:1.0: Identified as PCTV nanoStick T2 > 290e (card=78) > [ 13.583142] em28xx 1-1.2.4.1:1.0: dvb set to isoc mode. > [ 13.592690] em28xx 1-1.2.4.3:1.0: New device PCTV PCTV 292e @ 480 > Mbps (2013:025f, interface 0, class 0) > [ 13.609209] em28xx 1-1.2.4.3:1.0: DVB interface 0 found: isoc > [ 13.618736] em28xx 1-1.2.4.3:1.0: chip ID is em28178 > [ 15.742114] em28xx 1-1.2.4.3:1.0: EEPROM ID = 26 00 01 00, EEPROM > hash = 0x1f10fa04 > [ 15.742126] em28xx 1-1.2.4.3:1.0: EEPROM info: > [ 15.742136] em28xx 1-1.2.4.3:1.0: microcode start address = > 0x0004, boot configuration = 0x01 > [ 15.749999] em28xx 1-1.2.4.3:1.0: AC97 audio (5 sample rates) > [ 15.750012] em28xx 1-1.2.4.3:1.0: 500mA max power > [ 15.750028] em28xx 1-1.2.4.3:1.0: Table at offset 0x27, > strings=0x146a, 0x1888, 0x0a7e > [ 15.750417] em28xx 1-1.2.4.3:1.0: Identified as PCTV tripleStick > (292e) (card=94) > [ 15.750432] em28xx 1-1.2.4.3:1.0: dvb set to isoc mode. > [ 15.753015] usbcore: registered new interface driver em28xx > [ 15.808636] em28xx 1-1.2.4.1:1.0: Binding DVB extension > [ 15.876054] cxd2820r 4-006c: Sony CXD2820R successfully identified > [ 15.905239] tda18271 4-0060: creating new instance > [ 15.923907] tda18271: TDA18271HD/C2 detected @ 4-0060 > [ 16.425196] dvbdev: DVB: registering new adapter (1-1.2.4.1:1.0) > [ 16.435689] em28xx 1-1.2.4.1:1.0: DVB: registering adapter 0 > frontend 0 (Sony CXD2820R)... > [ 16.453437] em28xx 1-1.2.4.1:1.0: DVB extension successfully initialized > [ 16.463783] em28xx 1-1.2.4.3:1.0: Binding DVB extension > [ 16.499683] i2c i2c-6: Added multiplexed i2c bus 7 > [ 16.508155] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified > [ 16.518485] si2168 6-0064: firmware version: B 4.0.2 > [ 16.545725] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 > successfully attached > [ 16.560772] dvbdev: DVB: registering new adapter (1-1.2.4.3:1.0) > [ 16.570481] em28xx 1-1.2.4.3:1.0: DVB: registering adapter 1 > frontend 0 (Silicon Labs Si2168)... > [ 16.592323] em28xx 1-1.2.4.3:1.0: DVB extension successfully initialized > [ 16.602913] em28xx: Registered (Em28xx dvb Extension) extension > [ 16.640109] em28xx 1-1.2.4.1:1.0: Registering input extension > [ 16.651247] rc rc0: 1-1.2.4.1:1.0 IR as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.0/rc/rc0 > [ 16.722038] Registered IR keymap rc-pinnacle-pctv-hd > [ 16.733053] input: 1-1.2.4.1:1.0 IR as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.0/rc/rc0/input2 > [ 16.753630] em28xx 1-1.2.4.1:1.0: Input extension successfully initalized > [ 16.764109] em28xx 1-1.2.4.3:1.0: Registering input extension > [ 16.774447] rc rc1: 1-1.2.4.3:1.0 IR as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.0/rc/rc1 > [ 16.792973] Registered IR keymap rc-pinnacle-pctv-hd > [ 16.802484] input: 1-1.2.4.3:1.0 IR as > /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.0/rc/rc1/input3 > [ 16.822322] em28xx 1-1.2.4.3:1.0: Input extension successfully initalized > [ 16.832818] em28xx: Registered (Em28xx Input Extension) extension > [ 22.142086] si2168 6-0064: downloading firmware from file > 'dvb-demod-si2168-b40-01.fw' > [ 22.641659] si2168 6-0064: firmware version: B 4.0.11 > [ 22.659062] si2157 7-0060: found a 'Silicon Labs Si2157-A30' > [ 22.719300] si2157 7-0060: firmware version: 3.0.5 > [ 22.728337] em28xx 1-1.2.4.3:1.0: DVB: adapter 1 frontend 0 > frequency 0 out of range (42000000..870000000) > [ 23.257682] tda18271: performing RF tracking filter calibration > [ 26.994564] em28xx 1-1.2.4.1:1.0: write to i2c device at 0xd8 > failed with unknown error (status=1) > [ 27.021126] __tda18271_write_regs: [4-0060|M] ERROR: idx = 0x21, > len = 1, i2c_transfer returned: -6 > [ 28.125996] tda18271: RF tracking filter calibration complete > [ 28.137028] em28xx 1-1.2.4.1:1.0: DVB: adapter 0 frontend 0 > frequency 0 out of range (45000000..864000000) > > > Is this expected? It's running 4.12.3-v7+ from the rpi tree. > > > -Anders The TDA18271c2 RF tracking filter calibration is a sensitive process that requires silence on the i2c bus. My guess is that the em28xx i2c bus is not as quiet as it should be during this initialization. However, first I would check to see whether the device works with the windows driver. Maybe it's broken. -Michael Ira Krufky
