Am 19.08.2017 um 21:46 schrieb Sven Verdoolaege: > Hi, > Hi! > I hope this is the right place for asking about support > for analog TV on Hauppauge cards. > > I recently bought what I thought is a Hauppauge WinTV-HVR-900H > (that's what it says on the stick itself) because according > to https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-900H > analog TV should work on those sticks. > However, the stick is identified as a > "Hauppauge WinTV 930C-HD (1114xx) / HVR-901H (1114xx) / PCTV QuatroStick 522e" > instead and it seems that there is no support for analog TV > for this device (yet?). > > In particular, when I try to run tvtime, I get > videoinput: Can't get tuner info: Inappropriate ioctl for device > videoinput: Can't set tuner audio mode: Inappropriate ioctl for device > videoinput: Can't get tuner info: Inappropriate ioctl for device > videoinput: Can't set tuner audio mode: Inappropriate ioctl for device > videoinput: Tuner present, but our request to change to > videoinput: frequency 62250 failed with this error: Inappropriate ioctl for device. > videoinput: Please file a bug report at http://tvtime.net/ > videoinput: Tuner refuses to tell us the current frequency: Inappropriate ioctl for device > videoinput: Please file a bug report at http://tvtime.net/ > > Is anyone working on support for such devices? > Or does it already work and am I doing something wrong? > > I'm pasting the relevant dmesg output below. > Kernel version is 4.4.0-83-generic #106-Ubuntu. > > Thanks, > > skimo > > [ 44.522766] usb 3-4: new high-speed USB device number 2 using xhci_hcd > [ 44.653945] usb 3-4: New USB device found, idVendor=2013, idProduct=025e > [ 44.653947] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 44.653949] usb 3-4: Product: Hauppauge Device > [ 44.653950] usb 3-4: Manufacturer: Hauppauge > [ 44.653951] usb 3-4: SerialNumber: 4035578631 > [ 44.698824] Registered IR keymap rc-pinnacle-pctv-hd > [ 44.698928] input: Conexant Hybrid TV (cx231xx) MCE IR no TX (2013:025e) as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/rc/rc0/input23 > [ 44.698985] rc0: Conexant Hybrid TV (cx231xx) MCE IR no TX (2013:025e) as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/rc/rc0 > [ 44.703474] IR NEC protocol handler initialized > [ 44.703661] IR Sony protocol handler initialized > [ 44.703955] IR JVC protocol handler initialized > [ 44.703958] IR RC6 protocol handler initialized > [ 44.704086] IR SANYO protocol handler initialized > [ 44.704636] IR RC5(x/sz) protocol handler initialized > [ 44.704930] IR Sharp protocol handler initialized > [ 44.705056] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input24 > [ 44.705140] IR MCE Keyboard/mouse protocol handler initialized > [ 44.705330] IR XMP protocol handler initialized > [ 44.705705] lirc_dev: IR Remote Control driver registered, major 240 > [ 44.707056] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 > [ 44.707058] IR LIRC bridge handler initialized > [ 44.907035] mceusb 3-4:1.0: Registered Hauppauge Hauppauge Device with mce emulator interface version 1 > [ 44.907038] mceusb 3-4:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active) > [ 44.907130] usbcore: registered new interface driver mceusb > [ 44.918365] cx231xx 3-4:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2013:025e) with 7 interfaces > [ 44.918441] cx231xx 3-4:1.1: Identified as Hauppauge WinTV 930C-HD (1114xx) / HVR-901H (1114xx) / PCTV QuatroStick 522e (card=20) > [ 44.918733] i2c i2c-12: Added multiplexed i2c bus 14 > [ 44.918775] i2c i2c-12: Added multiplexed i2c bus 15 > [ 45.062403] cx25840 11-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0) > [ 47.044238] cx25840 11-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) > [ 47.101579] tveeprom 14-0050: Hauppauge model 111429, rev E2I6, serial# 4035578631 > [ 47.101582] tveeprom 14-0050: MAC address is 00:0d:fe:8a:0b:07 > [ 47.101583] tveeprom 14-0050: tuner model is SiLabs Si2157 (idx 186, type 4) > [ 47.101584] tveeprom 14-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) > [ 47.101585] tveeprom 14-0050: audio processor is CX23102 (idx 47) > [ 47.101586] tveeprom 14-0050: decoder processor is CX23102 (idx 46) > [ 47.101587] tveeprom 14-0050: has radio, has IR receiver, has no IR transmitter > [ 47.102572] cx231xx 3-4:1.1: v4l2 driver version 0.0.3 > [ 47.157788] cx231xx 3-4:1.1: Unknown tuner type configuring SIF > [ 47.182657] cx231xx 3-4:1.1: Registered video device video1 [v4l2] > [ 47.182721] cx231xx 3-4:1.1: Registered VBI device vbi0 > [ 47.182725] cx231xx 3-4:1.1: video EndPoint Addr 0x84, Alternate settings: 5 > [ 47.182728] cx231xx 3-4:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2 > [ 47.182730] cx231xx 3-4:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2 > [ 47.182732] cx231xx 3-4:1.1: TS EndPoint Addr 0x81, Alternate settings: 6 > [ 47.182784] usbcore: registered new interface driver cx231xx > [ 47.188184] cx231xx 3-4:1.1: audio EndPoint Addr 0x83, Alternate settings: 3 > [ 47.188187] cx231xx 3-4:1.1: Cx231xx Audio Extension initialized > [ 47.251193] i2c i2c-15: si2165: Detected Silicon Labs Si2165-D (type 7, rev 3) > [ 47.251197] i2c i2c-15: si2165: DVB-C is not yet supported. > [ 47.254581] si2157 15-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached > [ 47.254588] DVB: registering new adapter (cx231xx #0) > [ 47.254591] cx231xx 3-4:1.1: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2165 DVB-T)... > [ 47.254850] cx231xx 3-4:1.1: Successfully loaded cx231xx-dvb > [ 47.254855] cx231xx 3-4:1.1: Cx231xx dvb Extension initialized > [ 100.672828] cx231xx 3-4:1.1: Unknown tuner type configuring SIF > [ 100.748631] cx231xx 3-4:1.1: Unknown tuner type configuring SIF > Your stick is labeled as WinTV-HVR-900H but you got a different hardware than described by the wiki page mentioned above. According to your dmesg output your card has USB IDs: 2013:025e and that is the same ID as used for PCTV 522e DVB-T/C (Si2158+Si2165) The output shows that the chips si2158 and si2165 are successfully identified. The driver for the tuner (si2157) does currently not support analog reception. I do not know what is necessary to add this support. Maybe Antti or Olli can answer that question. Regards Matthias
