Hi,
the patch below adds the entries to the config arrays for a capture-only
board distributed by MAGIX [0]. The hardware itself (EM2860, SAA7113,
EMP202) is already supported.
This patch lacks the configuration for the GPIO pin, because I had/have
no time yet to figure out how it works. Video and audio work fine for me
in mplayer/mencoder.
The patch works against Linux 4.9.0 from Debian stretch/stable.
This is my first kernel submission, so tell me if you need more info or
if something should be changed. Thanks!
Cheers,
panic
[0] contains not much info, but for the record:
http://www.magix.com/gb/rescue-your-videotapes/
---
drivers/media/usb/em28xx/em28xx-cards.c | 20 ++++++++++++++++++++
drivers/media/usb/em28xx/em28xx.h | 1 +
2 files changed, 21 insertions(+)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index e397f54..96afb46 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2389,6 +2389,24 @@ struct em28xx_board em28xx_boards[] = {
.ir_codes = RC_MAP_HAUPPAUGE,
.leds = hauppauge_dualhd_leds,
},
+ /*
+ * 1b80:e349 MAGIX "Rescue your Videotapes!"
+ * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
+ */
+ [EM2860_BOARD_MAGIX] = {
+ .name = "MAGIX",
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_AUX,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_AUX,
+ } },
+ },
};
EXPORT_SYMBOL_GPL(em28xx_boards);
@@ -2582,6 +2600,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
{ USB_DEVICE(0x3275, 0x0085),
.driver_info = EM28178_BOARD_PLEX_PX_BCUD },
+ { USB_DEVICE(0x1b80, 0xe349),
+ .driver_info = EM2860_BOARD_MAGIX },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index d148463..0da7f6a 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -147,6 +147,7 @@
#define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 97
#define EM28178_BOARD_PLEX_PX_BCUD 98
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99
+#define EM2860_BOARD_MAGIX 100
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
--
2.11.0
