Hi Yong, On Mon, Jul 31, 2017 at 09:48:06AM +0800, Yong wrote: > On Sun, 30 Jul 2017 09:08:01 +0300 > Baruch Siach <baruch@xxxxxxxxxx> wrote: > > On Fri, Jul 28, 2017 at 06:02:33PM +0200, Maxime Ripard wrote: > > > On Thu, Jul 27, 2017 at 01:01:35PM +0800, Yong Deng wrote: > > > > + regmap_write(sdev->regmap, CSI_CH_F0_BUFA_REG, > > > > + (bus_addr + sdev->planar_offset[0]) >> 2); > > > > Why do you need the bit shift? Does that work for you? > > > > The User Manuals of both the V3s and the and the A33 (AKA R16) state that the > > BUFA field size in this register is 31:00, that is 32bit. I have found no > > indication of this bit shift in the Olimex provided sunxi-vfe[1] driver. On > > the A33 I have found that only after removing the bit-shift, (some sort of) > > data started to appear in the buffer. > > > > [1] https://github.com/hehopmajieh/a33_linux/tree/master/drivers/media/video/sunxi-vfe > > The Users Manuals do not document this bit shift. You should see line 10 to > 32 in https://github.com/hehopmajieh/a33_linux/blob/master/drivers/media/video/sunxi-vfe/csi/csi_reg.c Thanks. So for my reference, the SoCs that don't need bit shift are A31, A23, and A33. SoCs that need bit shift are A80, A83, H3, and V3s (AKA V30). baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@xxxxxxxxxx - tel: +972.52.368.4656, http://www.tkos.co.il -
