On Fri, 28 Jul 2017 18:03:53 +0200 Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: > Hi, > > On Thu, Jul 27, 2017 at 01:01:36PM +0800, Yong Deng wrote: > > Add binding documentation for Allwinner V3s CSI. > > > > Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx> > > --- > > .../devicetree/bindings/media/sun6i-csi.txt | 49 ++++++++++++++++++++++ > > 1 file changed, 49 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt > > > > diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt > > new file mode 100644 > > index 0000000..f8d83f6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt > > @@ -0,0 +1,49 @@ > > +Allwinner V3s Camera Sensor Interface > > +------------------------------ > > + > > +Required properties: > > + - compatible: value must be "allwinner,sun8i-v3s-csi" > > + - reg: base address and size of the memory-mapped region. > > + - interrupts: interrupt associated to this IP > > + - clocks: phandles to the clocks feeding the CSI > > + * ahb: the CSI interface clock > > We've been bad at this, but we're trying to have the same clock name > here across all devices, and to use "bus" instead of "ahb". OK. "ahb" was just follow other sunxi drivers. > > Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com Thanks, Yong
