Hanno,
I've been working on having the CT-3650 supported however I didn't go
very farther than having the dvb-c frontend to work. Nothing else
works : no CI, no DVB-T, no IR.
I've attached a patch which is working for me. Again, only the dvb-c
interface works. Also this patch should definitely not go upstream.
The cold firmware should not be used but it's there because I erased
the eeprom of my card by mistake.
I'm still planning to have a better support for this card but I
unfortunately have other things to work on before.
HTH,
Guy
On Mon, 09 Nov 2009 11:55:23 +0100
Hanno Zulla <abos@xxxxxxxx> wrote:
> Hi,
>
> > Anyone know how to get this working or this card is in a working
> > state under linux. Because if it not working yet I will stop
> > wasting my time
>
> Second that request. Is anybody working on a driver for this device?
> Is it worth waiting?
>
> Technotrend DVB products have been good for me in the past and this
> combination of DVB-C with CI is something well suited for my next vdr
> hardware setup.
>
> Thanks,
>
> Hanno
>
diff -r 6f58a5d8c7c6 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sat Aug 29 09:01:54 2009 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sat Nov 07 12:27:27 2009 +0100
@@ -61,7 +61,7 @@
#define USB_VID_HUMAX_COEX 0x10b9
/* Product IDs */
-#define USB_PID_ADSTECH_USB2_COLD 0xa333
+//#define USB_PID_ADSTECH_USB2_COLD 0xa333
#define USB_PID_ADSTECH_USB2_WARM 0xa334
#define USB_PID_AFATECH_AF9005 0x9020
#define USB_PID_AFATECH_AF9015_9015 0x9015
@@ -178,6 +178,7 @@
#define USB_PID_AVERMEDIA_A850 0x850a
#define USB_PID_AVERMEDIA_A805 0xa805
#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006
+#define USB_PID_TECHNOTREND_CONNECT_CT3650 0x300d
#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a
#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081
#define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058
diff -r 6f58a5d8c7c6 linux/drivers/media/dvb/dvb-usb/ttusb2.c
--- a/linux/drivers/media/dvb/dvb-usb/ttusb2.c Sat Aug 29 09:01:54 2009 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/ttusb2.c Sat Nov 07 12:27:27 2009 +0100
@@ -29,6 +29,9 @@
#include "tda826x.h"
#include "tda10086.h"
+#include "tda1002x.h"
+#include "tda827x.h"
+#include "tda10048.h"
#include "lnbp21.h"
/* debug */
@@ -159,7 +162,34 @@
.xtal_freq = TDA10086_XTAL_16M,
};
-static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
+static struct tda10023_config tda10023_config = {
+ .demod_address = 0x0c,
+ .invert = 0,
+ .xtal = 16000000,
+ .pll_m = 11,
+ .pll_p = 3,
+ .pll_n = 1,
+ .deltaf = 0xa511,
+};
+
+static struct tda10048_config tda10048_config = {
+ .demod_address = 0x8,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_50,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3800,
+ .dtv8_if_freq_khz = TDA10048_IF_4300,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda827x_config tda827x_config = {
+ .config = 0,
+// .switch_addr = 0x4b,
+};
+
+static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev,0,3) < 0)
err("set interface to alts=3 failed");
@@ -172,7 +202,40 @@
return 0;
}
-static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
+static int ttusb2_frontend_tda10048_attach(struct dvb_usb_adapter *adap)
+{
+ if (usb_set_interface(adap->dev->udev,0,3) < 0)
+ err("set interface to alts=3 failed");
+
+ if ((adap->fe = dvb_attach(tda10048_attach, &tda10048_config, &adap->dev->i2c_adap)) == NULL) {
+ deb_info("TDA10048 attach failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
+{
+ if (usb_set_interface(adap->dev->udev,0,3) < 0)
+ err("set interface to alts=3 failed");
+ if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
+ deb_info("TDA10023 attach failed\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap) {
+
+ if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, &tda827x_config) == NULL) {
+ printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
{
if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
deb_info("TDA8263 attach failed\n");
@@ -189,6 +252,7 @@
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties ttusb2_properties;
static struct dvb_usb_device_properties ttusb2_properties_s2400;
+static struct dvb_usb_device_properties ttusb2_properties_ct3650;
static int ttusb2_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -196,6 +260,8 @@
if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650,
THIS_MODULE, NULL, adapter_nr))
return 0;
return -ENODEV;
@@ -206,6 +272,9 @@
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
{ USB_DEVICE(USB_VID_TECHNOTREND,
USB_PID_TECHNOTREND_CONNECT_S2400) },
+ { USB_DEVICE(USB_VID_TECHNOTREND,
+ USB_PID_TECHNOTREND_CONNECT_CT3650) },
+ { USB_DEVICE(0x04b4, 0x8613) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, ttusb2_table);
@@ -223,8 +292,8 @@
{
.streaming_ctrl = NULL, // ttusb2_streaming_ctrl,
- .frontend_attach = ttusb2_frontend_attach,
- .tuner_attach = ttusb2_tuner_attach,
+ .frontend_attach = ttusb2_frontend_tda10086_attach,
+ .tuner_attach = ttusb2_tuner_tda826x_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
@@ -275,8 +344,8 @@
{
.streaming_ctrl = NULL,
- .frontend_attach = ttusb2_frontend_attach,
- .tuner_attach = ttusb2_tuner_attach,
+ .frontend_attach = ttusb2_frontend_tda10086_attach,
+ .tuner_attach = ttusb2_tuner_tda826x_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
@@ -310,6 +379,72 @@
}
};
+static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-tt-ct3650-01.fw",
+
+ .size_of_priv = sizeof(struct ttusb2_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = NULL,
+
+ .frontend_attach = ttusb2_frontend_tda10023_attach,
+ .tuner_attach = ttusb2_tuner_tda827x_attach,
+
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1,
+ }
+ }
+ }
+ },
+/* {
+ .streaming_ctrl = NULL,
+
+ .frontend_attach = ttusb2_frontend_tda10048_attach,
+ .tuner_attach = ttusb2_tuner_tda827x_attach,
+
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1,
+ }
+ }
+ }
+ },*/
+ },
+
+ .power_ctrl = ttusb2_power_ctrl,
+ .identify_state = ttusb2_identify_state,
+
+ .i2c_algo = &ttusb2_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Technotrend TT-connect CT-3650",
+ .warm_ids = { &ttusb2_table[3], NULL },
+ .cold_ids = { &ttusb2_table[4], NULL },
+ },
+ }
+};
+
static struct usb_driver ttusb2_driver = {
.name = "dvb_usb_ttusb2",
.probe = ttusb2_probe,
