On Sun, Nov 8, 2009 at 10:58 PM, Barry Williams <bazzawill@xxxxxxxxx> wrote: > Hi Devin > I did not reboot after installing the patch somehow I thought simply > removing the module (as I had done to restore some stability to my > system) and reloading the module after the patch would be all I need. > Well I learned that is not the case my apologies for not trying that > first. So your tree fixed my second system with the rev 1 tuner. > However my first system with the rev 2 card while now stable with your > tree will not tune. > Barry Ok, good. So now we just need to nail down why the 0fe9:db98 board doesn't work. Fortunately, I think I know what that bug is too. Try this: 1. Reboot the system. 2. Perform a single tuning attempt. 3. Send the full dmesg output starting at the time the box is booted. If you're lucky, it's the issue I think it is, which will result in a one-line patch. Thanks, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
