This patchset adds support for the Intel IPU3 (Image Processing Unit) ImgU, which is essentially a modern memory-to-memory ISP. It implements raw Bayer to YUV image format conversion as well as a large number of other pixel processing algorithms for improving the image quality. Meta data formats are defined for image statistics (3A, i.e. automatic white balance, exposure and focus, histogram and local area contrast enhancement) as well as for the pixel processing algorithm parameters. The documentation for these formats is currently not included in the patchset but will be added in a future version of this set. The algorithm parameters need to be considered specific to a given frame and typically a large number of these parameters change on frame to frame basis. Additionally, the parameters are highly structured (and not a flat space of independent configuration primitives). They also reflect the data structures used by the firmware and the hardware. On top of that, the algorithms require highly specialized user space to make meaningful use of them. For these reasons it has been chosen video buffers to pass the parameters to the device. On individual patches: The heart of ImgU is the CSS, or Camera Subsystem, which contains the image processors and HW accelerators. The 3A statistics and other firmware parameter computation related functions are implemented in patch 8. All h/w programming related code can be found in patch 9. To access DDR via ImgU's own memory space, IPU3 is also equipped with its own MMU unit, the driver is implemented in patch 2. Patch 3 uses above driver for DMA mapping operation. Tomasz Figa thoroughly reworked both mmu and dmamap driver submitted in v2; as a result, current code has dependency on "[RFC PATCH 0/5] Fixes for loadable modules implementing DMA/IOMMU APIs" series being discussed on the following thread: <URL:https://www.spinics.net/lists/kernel/msg2549391.html> Patch 5-10 are basically IPU3 CSS specific implementations: 6 and 7 provide some utility functions and manage IPU3 fw download and install. The firmware which is called ipu3-fw.bin can be downloaded from here: git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git Patch 9 and 10 are of the same file, the latter implements interface functions for access fw & hw capabilities defined in patch 8. Patch 12 uses Kconfig and Makefile created by IPU3 cio2 patch series: <URL:https://patchwork.kernel.org/patch/9833873/> Here is the device topology: localhost ~ # media-ctl -d /dev/media0 -p Media controller API version 0.1.0 Media device information ------------------------ driver ipu3-imgu model ipu3-imgu serial bus info 0000:00:05.0 hw revision 0x0 driver version 4.12.0 Device topology - entity 1: ipu3-imgu:0 (8 pads, 8 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev0 pad0:Sink stream:0[fmt:UYVY2X8/352x288] link: <- "input":0 [ENABLED,IMMUTABLE] pad1:Sink stream:0[fmt:UYVY2X8/352x288] link: <- "parameters":0 [] pad2:Source stream:0[fmt:UYVY2X8/352x288] link: -> "output":0 [] pad3:Source stream:0[fmt:UYVY2X8/352x288] link: -> "viewfinder":0 [] pad4:Source stream:0[fmt:UYVY2X8/352x288] link: -> "postview":0 [] pad5:Source stream:0[fmt:UYVY2X8/352x288] link: -> "3a stat":0 [] pad6:Source stream:0[fmt:UYVY2X8/352x288] link: -> "dvs stat":0 [] pad7:Source stream:0[fmt:UYVY2X8/352x288] link: -> "lace stat":0 [] - entity 2: input (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0:Source link: -> "ipu3-imgu:0":0 [ENABLED,IMMUTABLE] - entity 3: parameters (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0:Source link: -> "ipu3-imgu:0":1 [] - entity 4: output (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0:Sink link: <- "ipu3-imgu:0":2 [] - entity 5: viewfinder (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0:Sink link: <- "ipu3-imgu:0":3 [] - entity 6: postview (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0:Sink link: <- "ipu3-imgu:0":4 [] - entity 7: 3a stat (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0:Sink link: <- "ipu3-imgu:0":5 [] - entity 8: dvs stat (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0:Sink link: <- "ipu3-imgu:0":6 [] - entity 9: lace stat (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0:Sink link: <- "ipu3-imgu:0":7 [] =========== = history = =========== version 3: - ipu3-mmu.c and ipu3-dmamap.c: Tomasz Figa reworked both drivers and updated related files. - ipu2-abi.h: update imgu_abi_binary_info ABI to support latest ipu3-fw.bin. use __packed qualifier on structs suggested by Sakari Ailus. - ipu3-css-fw.c and ipu3-css-fw.h: fix suggested by Tomasz Figa: remove pointer type in firmware blob structs. fix binary_header array in struct imgu_fw_header. fix calling ipu3_css_fw_show_binary() before proper checking. fix logic error for valid length checking of blob name. - ipu3-css-params.c/ipu3_css_scaler_get_exp(): use lib helper suggested by Andy Shevchenko. - ipu3-v4l2.c/ipu3_videoc_querycap(): fill device_caps fix suggested by Hans Verkuil. add VB2_DMABUF suggested by Tomasz Figa. - ipu3-css.c: increase IMGU freq from 300MHZ to 450MHZ (internal fix) - ipu3.c: use vb2_dma_sg_memop for the time being(internal fix). Todo list: - Provide documentation on the new IPU3 meta format defined in patch 1. - Use V4L2_BUF_TYPE_META_OUTPUT instead of V4L2_BUF_TYPE_VIDEO_OUTPUT. - Run v4l2-compliance and fix the failure test cases. - Continue looking for opportunities to optimize code with generic lib. version 2: This version cherry-picked firmware ABI change and other fix in order to bring the code up-to-date with our internal release. I will go over the review comments in v1 and address them in v3 and future update. version 1: - Initial submission. Tomasz Figa (2): intel-ipu3: mmu: implement driver intel-ipu3: Add DMA API implementation Yong Zhi (10): videodev2.h, v4l2-ioctl: add IPU3 meta buffer format intel-ipu3: Add user space ABI definitions intel-ipu3: css: tables intel-ipu3: css: imgu dma buff pool intel-ipu3: css: firmware management intel-ipu3: params: compute and program ccs intel-ipu3: css hardware setup intel-ipu3: css pipeline intel-ipu3: Add imgu v4l2 driver intel-ipu3: imgu top level pci device drivers/media/pci/intel/ipu3/Kconfig | 31 + drivers/media/pci/intel/ipu3/Makefile | 22 + drivers/media/pci/intel/ipu3/ipu3-abi.h | 1578 ++++ drivers/media/pci/intel/ipu3/ipu3-css-fw.c | 270 + drivers/media/pci/intel/ipu3/ipu3-css-fw.h | 206 + drivers/media/pci/intel/ipu3/ipu3-css-params.c | 3114 ++++++++ drivers/media/pci/intel/ipu3/ipu3-css-params.h | 105 + drivers/media/pci/intel/ipu3/ipu3-css-pool.c | 130 + drivers/media/pci/intel/ipu3/ipu3-css-pool.h | 53 + drivers/media/pci/intel/ipu3/ipu3-css.c | 2274 ++++++ drivers/media/pci/intel/ipu3/ipu3-css.h | 235 + drivers/media/pci/intel/ipu3/ipu3-dmamap.c | 302 + drivers/media/pci/intel/ipu3/ipu3-dmamap.h | 22 + drivers/media/pci/intel/ipu3/ipu3-mmu.c | 639 ++ drivers/media/pci/intel/ipu3/ipu3-mmu.h | 27 + drivers/media/pci/intel/ipu3/ipu3-tables.c | 9621 ++++++++++++++++++++++++ drivers/media/pci/intel/ipu3/ipu3-tables.h | 82 + drivers/media/pci/intel/ipu3/ipu3-v4l2.c | 724 ++ drivers/media/pci/intel/ipu3/ipu3.c | 844 +++ drivers/media/pci/intel/ipu3/ipu3.h | 188 + drivers/media/v4l2-core/v4l2-ioctl.c | 4 + include/uapi/linux/intel-ipu3.h | 2182 ++++++ include/uapi/linux/videodev2.h | 6 + 23 files changed, 22659 insertions(+) create mode 100644 drivers/media/pci/intel/ipu3/ipu3-abi.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-fw.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-fw.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-params.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-params.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-pool.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-pool.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-dmamap.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-dmamap.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-mmu.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-mmu.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-tables.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-tables.h create mode 100644 drivers/media/pci/intel/ipu3/ipu3-v4l2.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3.h create mode 100644 include/uapi/linux/intel-ipu3.h -- 2.7.4
