Re: [PATCH 00/11] drm/sun4i: add CEC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jul 11, 2017 at 11:06:52PM +0200, Hans Verkuil wrote:
> On 11/07/17 22:39, Maxime Ripard wrote:
> > On Tue, Jul 11, 2017 at 08:30:33AM +0200, Hans Verkuil wrote:
> >> From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> >>
> >> This patch series adds CEC support for the sun4i HDMI controller.
> >>
> >> The CEC hardware support for the A10 is very low-level as it just
> >> controls the CEC pin. Since I also wanted to support GPIO-based CEC
> >> hardware most of this patch series is in the CEC framework to
> >> add a generic low-level CEC pin framework. It is only the final patch
> >> that adds the sun4i support.
> >>
> >> This patch series first makes some small changes in the CEC framework
> >> (patches 1-4) to prepare for this CEC pin support.
> >>
> >> Patch 5-7 adds the new API elements and documents it. Patch 6 reworks
> >> the CEC core event handling.
> >>
> >> Patch 8 adds pin monitoring support (allows userspace to see all
> >> CEC pin transitions as they happen).
> >>
> >> Patch 9 adds the core cec-pin implementation that translates low-level
> >> pin transitions into valid CEC messages. Basically this does what any
> >> SoC with a proper CEC hardware implementation does.
> >>
> >> Patch 10 documents the cec-pin kAPI (and also the cec-notifier kAPI
> >> which was missing).
> >>
> >> Finally patch 11 adds the actual sun4i_hdmi CEC implementation.
> >>
> >> I tested this on my cubieboard. There were no errors at all
> >> after 126264 calls of 'cec-ctl --give-device-vendor-id' while at the
> >> same time running a 'make -j4' of the v4l-utils git repository and
> >> doing a continuous scp to create network traffic.
> >>
> >> This patch series is based on top of the mainline kernel as of
> >> yesterday (so with all the sun4i and cec patches for 4.13 merged).
> > 
> > For the whole serie:
> > Reviewed-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> > 
> >> Maxime, patches 1-10 will go through the media subsystem. How do you
> >> want to handle the final patch? It can either go through the media
> >> subsystem as well, or you can sit on it and handle this yourself during
> >> the 4.14 merge window. Another option is to separate the Kconfig change
> >> into its own patch. That way you can merge the code changes and only
> >> have to handle the Kconfig patch as a final change during the merge
> >> window.
> > 
> > We'll probably have a number of reworks for 4.14, so it would be
> > better if I merged it.
> > 
> > However, I guess if we just switch to a depends on CEC_PIN instead of
> > a select, everything would just work even if we merge your patches in
> > a separate tree, right?
> 
> This small patch will do it:
> 
> diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
> index e884d265c0b3..ebad80aefc87 100644
> --- a/drivers/gpu/drm/sun4i/Kconfig
> +++ b/drivers/gpu/drm/sun4i/Kconfig
> @@ -25,7 +25,7 @@ config DRM_SUN4I_HDMI_CEC
>         bool "Allwinner A10 HDMI CEC Support"
>         depends on DRM_SUN4I_HDMI
>         select CEC_CORE
> -       select CEC_PIN
> +       depends on CEC_PIN
>         help
>  	  Choose this option if you have an Allwinner SoC with an HDMI
>  	  controller and want to use CEC.
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> index 8263de225b36..82bc6923b90f 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> @@ -15,7 +15,7 @@
>  #include <drm/drm_connector.h>
>  #include <drm/drm_encoder.h>
> 
> -#include <media/cec-pin.h>
> +#include <media/cec.h>
> 
>  #define SUN4I_HDMI_CTRL_REG		0x004
>  #define SUN4I_HDMI_CTRL_ENABLE			BIT(31)
> 
> 
> Unfortunately you need to change the header as well since cec-pin.h doesn't
> exist without the cec patches. It might be better to
> 
> And once the cec patch series and the sun4i_hdmi patch is merged the patch above
> can be applied with -R and all will work fine.
> 
> This seems a sensible way forward.

I just tested this serie, it works just fine. I've applied the patch
11 with my Tested-by and that small patch above.

Thanks a lot!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux