Hi, On Tue, Jul 18, 2017 at 01:01:11AM +0300, Sakari Ailus wrote: > From: Pavel Machek <pavel@xxxxxx> > > Add support for parsing CSI1 configuration. > > Signed-off-by: Pavel Machek <pavel@xxxxxx> > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx> -- Sebastian > --- > drivers/media/platform/omap3isp/isp.c | 106 +++++++++++++++++++++-------- > drivers/media/platform/omap3isp/omap3isp.h | 1 + > 2 files changed, 80 insertions(+), 27 deletions(-) > > diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c > index 441eba1e02eb..80ed5a5f862a 100644 > --- a/drivers/media/platform/omap3isp/isp.c > +++ b/drivers/media/platform/omap3isp/isp.c > @@ -2017,6 +2017,7 @@ static int isp_fwnode_parse(struct device *dev, struct fwnode_handle *fwnode, > struct v4l2_fwnode_endpoint vep; > unsigned int i; > int ret; > + bool csi1 = false; > > ret = v4l2_fwnode_endpoint_parse(fwnode, &vep); > if (ret) > @@ -2045,41 +2046,92 @@ static int isp_fwnode_parse(struct device *dev, struct fwnode_handle *fwnode, > > case ISP_OF_PHY_CSIPHY1: > case ISP_OF_PHY_CSIPHY2: > - /* FIXME: always assume CSI-2 for now. */ > + switch (vep.bus_type) { > + case V4L2_MBUS_CCP2: > + case V4L2_MBUS_CSI1: > + dev_dbg(dev, "csi1/ccp2 configuration\n"); > + csi1 = true; > + break; > + case V4L2_MBUS_CSI2: > + dev_dbg(dev, "csi2 configuration\n"); > + csi1 = false; > + break; > + default: > + dev_err(dev, "unsupported bus type %u\n", > + vep.bus_type); > + return -EINVAL; > + } > + > switch (vep.base.port) { > case ISP_OF_PHY_CSIPHY1: > - buscfg->interface = ISP_INTERFACE_CSI2C_PHY1; > + if (csi1) > + buscfg->interface = ISP_INTERFACE_CCP2B_PHY1; > + else > + buscfg->interface = ISP_INTERFACE_CSI2C_PHY1; > break; > case ISP_OF_PHY_CSIPHY2: > - buscfg->interface = ISP_INTERFACE_CSI2A_PHY2; > + if (csi1) > + buscfg->interface = ISP_INTERFACE_CCP2B_PHY2; > + else > + buscfg->interface = ISP_INTERFACE_CSI2A_PHY2; > break; > } > - buscfg->bus.csi2.lanecfg.clk.pos = vep.bus.mipi_csi2.clock_lane; > - buscfg->bus.csi2.lanecfg.clk.pol = > - vep.bus.mipi_csi2.lane_polarities[0]; > - dev_dbg(dev, "clock lane polarity %u, pos %u\n", > - buscfg->bus.csi2.lanecfg.clk.pol, > - buscfg->bus.csi2.lanecfg.clk.pos); > - > - buscfg->bus.csi2.num_data_lanes = > - vep.bus.mipi_csi2.num_data_lanes; > - > - for (i = 0; i < buscfg->bus.csi2.num_data_lanes; i++) { > - buscfg->bus.csi2.lanecfg.data[i].pos = > - vep.bus.mipi_csi2.data_lanes[i]; > - buscfg->bus.csi2.lanecfg.data[i].pol = > - vep.bus.mipi_csi2.lane_polarities[i + 1]; > + if (csi1) { > + buscfg->bus.ccp2.lanecfg.clk.pos = > + vep.bus.mipi_csi1.clock_lane; > + buscfg->bus.ccp2.lanecfg.clk.pol = > + vep.bus.mipi_csi1.lane_polarity[0]; > + dev_dbg(dev, "clock lane polarity %u, pos %u\n", > + buscfg->bus.ccp2.lanecfg.clk.pol, > + buscfg->bus.ccp2.lanecfg.clk.pos); > + > + buscfg->bus.ccp2.lanecfg.data[0].pos = > + vep.bus.mipi_csi1.data_lane; > + buscfg->bus.ccp2.lanecfg.data[0].pol = > + vep.bus.mipi_csi1.lane_polarity[1]; > + > dev_dbg(dev, "data lane %u polarity %u, pos %u\n", i, > - buscfg->bus.csi2.lanecfg.data[i].pol, > - buscfg->bus.csi2.lanecfg.data[i].pos); > + buscfg->bus.ccp2.lanecfg.data[0].pol, > + buscfg->bus.ccp2.lanecfg.data[0].pos); > + > + buscfg->bus.ccp2.strobe_clk_pol = > + vep.bus.mipi_csi1.clock_inv; > + buscfg->bus.ccp2.phy_layer = vep.bus.mipi_csi1.strobe; > + buscfg->bus.ccp2.ccp2_mode = > + vep.bus_type == V4L2_MBUS_CCP2; > + buscfg->bus.ccp2.vp_clk_pol = 1; > + > + buscfg->bus.ccp2.crc = 1; > + } else { > + buscfg->bus.csi2.lanecfg.clk.pos = > + vep.bus.mipi_csi2.clock_lane; > + buscfg->bus.csi2.lanecfg.clk.pol = > + vep.bus.mipi_csi2.lane_polarities[0]; > + dev_dbg(dev, "clock lane polarity %u, pos %u\n", > + buscfg->bus.csi2.lanecfg.clk.pol, > + buscfg->bus.csi2.lanecfg.clk.pos); > + > + buscfg->bus.csi2.num_data_lanes = > + vep.bus.mipi_csi2.num_data_lanes; > + > + for (i = 0; i < buscfg->bus.csi2.num_data_lanes; i++) { > + buscfg->bus.csi2.lanecfg.data[i].pos = > + vep.bus.mipi_csi2.data_lanes[i]; > + buscfg->bus.csi2.lanecfg.data[i].pol = > + vep.bus.mipi_csi2.lane_polarities[i + 1]; > + dev_dbg(dev, > + "data lane %u polarity %u, pos %u\n", i, > + buscfg->bus.csi2.lanecfg.data[i].pol, > + buscfg->bus.csi2.lanecfg.data[i].pos); > + } > + /* > + * FIXME: now we assume the CRC is always there. > + * Implement a way to obtain this information from the > + * sensor. Frame descriptors, perhaps? > + */ > + > + buscfg->bus.csi2.crc = 1; > } > - > - /* > - * FIXME: now we assume the CRC is always there. > - * Implement a way to obtain this information from the > - * sensor. Frame descriptors, perhaps? > - */ > - buscfg->bus.csi2.crc = 1; > break; > > default: > diff --git a/drivers/media/platform/omap3isp/omap3isp.h b/drivers/media/platform/omap3isp/omap3isp.h > index 3c26f9a3f508..672a9cf5aa4d 100644 > --- a/drivers/media/platform/omap3isp/omap3isp.h > +++ b/drivers/media/platform/omap3isp/omap3isp.h > @@ -108,6 +108,7 @@ struct isp_ccp2_cfg { > unsigned int ccp2_mode:1; > unsigned int phy_layer:1; > unsigned int vpclk_div:2; > + unsigned int vp_clk_pol:1; > struct isp_csiphy_lanes_cfg lanecfg; > }; > > -- > 2.11.0 >
Attachment:
signature.asc
Description: PGP signature