The following patch series adapts the firedtv driver for FireWire-attached DVB boxes and cards to the newer firewire-core kernel API. The driver will continue to work with the older ieee1394 kernel API as well. Which of the two IEEE 1394 stacks will be used depends on which one was configured at build time. If both were built, firedtv transparently uses the stack which is bound to the FireWire controller. This patch series depends on changes to firewire-core which were merged into Linux 2.6.31. There is some non-essential functionality yet to implement: - Finish FCP support in firewire-core so that more than one AV/C device can be used on the same FireWire bus at the same time. - Enhance firedtv to use firewire-core's channel and bandwidth allocation function for proper cooperation with non-FireDTV AV/C devices on the same bus. Following as reply: [PATCH 1/4] firedtv: move remote control workqueue handling into rc source file [PATCH 2/4] firedtv: reform lock transaction backend call [PATCH 3/4] firedtv: add missing include, rename a constant [PATCH 4/4] firedtv: port to new firewire core drivers/media/dvb/firewire/Kconfig | 7 drivers/media/dvb/firewire/Makefile | 1 drivers/media/dvb/firewire/firedtv-1394.c | 37 +- drivers/media/dvb/firewire/firedtv-avc.c | 50 +- drivers/media/dvb/firewire/firedtv-dvb.c | 15 drivers/media/dvb/firewire/firedtv-fw.c | 385 ++++++++++++++++++++++ drivers/media/dvb/firewire/firedtv-rc.c | 2 drivers/media/dvb/firewire/firedtv.h | 17 8 files changed, 471 insertions(+), 43 deletions(-) -- Stefan Richter -=====-==--= =-== -=--- http://arcgraph.de/sr/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html