On 07/05/2017 04:03 PM, Rob Herring wrote: > On Mon, Jul 03, 2017 at 11:16:02AM +0200, Hugues Fruchet wrote: >> From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx> >> >> This adds documentation of device tree bindings >> for the OV965X family camera sensor module. >> >> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> >> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx> >> --- >> .../devicetree/bindings/media/i2c/ov965x.txt | 45 ++++++++++++++++++++++ >> 1 file changed, 45 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov965x.txt >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/ov965x.txt b/Documentation/devicetree/bindings/media/i2c/ov965x.txt >> new file mode 100644 >> index 0000000..4ceb727 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/i2c/ov965x.txt >> @@ -0,0 +1,45 @@ >> +* Omnivision OV9650/9652/9655 CMOS sensor >> + >> +The Omnivision OV965x sensor support multiple resolutions output, such as >> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB >> +output format. >> + >> +Required Properties: >> +- compatible: should be one of >> + "ovti,ov9650" >> + "ovti,ov9652" >> + "ovti,ov9655" >> +- clocks: reference to the mclk input clock. >> + >> +Optional Properties: >> +- resetb-gpios: reference to the GPIO connected to the RESETB pin, if any, >> + polarity is active low. > > reset-gpios > >> +- pwdn-gpios: reference to the GPIO connected to the PWDN pin, if any, >> + polarity is active high. > > powerdown-gpios > > Both are standardish names for such signals. > > Rob Thanks Rob, I will fix, Hugues. >
