From: Daniel Scheller <d.scheller@xxxxxxx> Adds a stv0910_single modparm which, when set, configures the stv0910 to run in single demodulator mode, currently intended for high bit rate testing. Signed-off-by: Daniel Scheller <d.scheller@xxxxxxx> Tested-by: Richard Scobie <r.scobie@xxxxxxxxxxxx> --- drivers/media/pci/ddbridge/ddbridge-core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c index b3fc6a875279..e762396730db 100644 --- a/drivers/media/pci/ddbridge/ddbridge-core.c +++ b/drivers/media/pci/ddbridge/ddbridge-core.c @@ -53,6 +53,10 @@ static int xo2_speed = 2; module_param(xo2_speed, int, 0444); MODULE_PARM_DESC(xo2_speed, "default transfer speed for xo2 based duoflex, 0=55,1=75,2=90,3=104 MBit/s, default=2, use attribute to change for individual cards"); +static int stv0910_single; +module_param(stv0910_single, int, 0444); +MODULE_PARM_DESC(stv0910_single, "use stv0910 cards as single demods"); + DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); /* MSI had problems with lost interrupts, fixed but needs testing */ @@ -942,6 +946,9 @@ static int demod_attach_stv0910(struct ddb_input *input, int type) struct stv0910_cfg cfg = stv0910_p; struct lnbh25_config lnbcfg = lnbh25_cfg; + if (stv0910_single) + cfg.single = 1; + if (type) cfg.parallel = 2; input->fe = dvb_attach(stv0910_attach, i2c, &cfg, (input->nr & 1)); -- 2.13.0
