Hello, On 29/06/2017 17:55, Sean Young wrote: > On Thu, Jun 29, 2017 at 05:29:01PM +0200, Mason wrote: > >> I'm trying to use an IR driver written for my SoC: >> https://github.com/mansr/linux-tangox/blob/master/drivers/media/rc/tangox-ir.c >> >> I added these options to my defconfig: >> >> +CONFIG_MEDIA_SUPPORT=y >> +CONFIG_MEDIA_RC_SUPPORT=y >> +CONFIG_RC_DEVICES=y >> +CONFIG_IR_TANGO=y >> >> (I don't think I need the RC decoders, because the HW is supposed >> to support HW decoding of NEC, RC5, RC6). > > I haven't seen this driver before, what hardware is this for? Sigma Designs tango3/tango4 (SMP86xx and SMP87xx) >> These are the logs printed at boot: >> >> [ 1.827842] IR NEC protocol handler initialized >> [ 1.832407] IR RC5(x/sz) protocol handler initialized >> [ 1.837491] IR RC6 protocol handler initialized >> [ 1.842049] IR JVC protocol handler initialized >> [ 1.846606] IR Sony protocol handler initialized >> [ 1.851248] IR SANYO protocol handler initialized >> [ 1.855979] IR Sharp protocol handler initialized >> [ 1.860708] IR MCE Keyboard/mouse protocol handler initialized >> [ 1.866575] IR XMP protocol handler initialized >> [ 1.871232] tango-ir 10518.ir: SMP86xx IR decoder at 0x10518/0x105e0 IRQ 21 >> [ 1.878241] Registered IR keymap rc-empty >> [ 1.882457] input: tango-ir as /devices/platform/soc/10518.ir/rc/rc0/input0 >> [ 1.889473] tango_ir_open >> [ 1.892105] rc rc0: tango-ir as /devices/platform/soc/10518.ir/rc/rc0 >> >> >> I was naively expecting some kind of dev/input/event0 node >> I could cat to grab all the remote control key presses. >> >> But I don't see anything relevant in /dev > > Do you have CONFIG_INPUT_EVDEV set? Is udev setup to create the devices? I was indeed missing CONFIG_INPUT_EVDEV. As for udev: [ 2.199642] udevd[960]: starting eudev-3.2.1 $ ls -l /dev/input/ total 0 drwxr-xr-x 2 root root 60 Jan 1 00:00 by-path crw-rw---- 1 root input 13, 64 Jan 1 00:00 event0 But still no cookie: $ cat /dev/input/event0 remains mute :-( $ ir-keytable -v -t Found device /sys/class/rc/rc0/ Input sysfs node is /sys/class/rc/rc0/input0/ Event sysfs node is /sys/class/rc/rc0/input0/event0/ Parsing uevent /sys/class/rc/rc0/input0/event0/uevent /sys/class/rc/rc0/input0/event0/uevent uevent MAJOR=13 /sys/class/rc/rc0/input0/event0/uevent uevent MINOR=64 /sys/class/rc/rc0/input0/event0/uevent uevent DEVNAME=input/event0 Parsing uevent /sys/class/rc/rc0/uevent /sys/class/rc/rc0/uevent uevent NAME=rc-empty input device is /dev/input/event0 /sys/class/rc/rc0/protocols protocol rc-5 (disabled) /sys/class/rc/rc0/protocols protocol nec (disabled) /sys/class/rc/rc0/protocols protocol rc-6 (disabled) Opening /dev/input/event0 Input Protocol version: 0x00010001 Testing events. Please, press CTRL-C to abort. ^C Is rc-empty perhaps not the right choice? > By opening the /dev/input/event0 device, tango_ir_open() gets called which > presumably enables interrupts or IR decoding for the device. It's hard to > say without knowing anything about the soc. Actually tango_ir_open() is called at boot, before any process has a chance to open /dev/input/event0 [ 1.926730] [<c03cd9a4>] (tango_ir_open) from [<c03c8554>] (rc_open+0x44/0x6c) [ 1.933994] [<c03c8554>] (rc_open) from [<c03be890>] (input_open_device+0x74/0xac) [ 1.941610] [<c03be890>] (input_open_device) from [<c032f96c>] (kbd_connect+0x64/0x80) [ 1.949570] [<c032f96c>] (kbd_connect) from [<c03bf0dc>] (input_attach_handler+0x1bc/0x1f4) [ 1.957965] [<c03bf0dc>] (input_attach_handler) from [<c03bf58c>] (input_register_device+0x3b4/0x42c) [ 1.967234] [<c03bf58c>] (input_register_device) from [<c03c9be8>] (rc_register_device+0x2d8/0x52c) [ 1.976327] [<c03c9be8>] (rc_register_device) from [<c03cdcfc>] (tango_ir_probe+0x328/0x3a4) [ 1.984815] [<c03cdcfc>] (tango_ir_probe) from [<c03508b0>] (platform_drv_probe+0x34/0x6c) [ 1.993124] [<c03508b0>] (platform_drv_probe) from [<c034f360>] (really_probe+0x1c4/0x250) But I have a printk in the ISR, and it's obviously not called. > It would be nice to see this driver merged to mainline. +1 (especially if I can get it to work) Regards.
