Hi Hugues,
On Thu, Jun 22, 2017 at 05:05:40PM +0200, Hugues Fruchet wrote:
> Align resolution sequences on initialization sequence using
> i2c_rv structure NULL terminated .This add flexibility
> on resolution sequence size.
> Document resolution related registers by using corresponding
> define instead of hexa address/value.
>
> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
> ---
> drivers/media/i2c/ov9650.c | 98 ++++++++++++++++++++++++++++++----------------
> 1 file changed, 64 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c
> index 4311da6..8b283c9 100644
> --- a/drivers/media/i2c/ov9650.c
> +++ b/drivers/media/i2c/ov9650.c
> @@ -227,11 +227,16 @@ struct ov965x_ctrls {
> u8 update;
> };
>
> +struct i2c_rv {
> + u8 addr;
> + u8 value;
> +};
> +
> struct ov965x_framesize {
> u16 width;
> u16 height;
> u16 max_exp_lines;
> - const u8 *regs;
> + const struct i2c_rv *regs;
> };
>
> struct ov965x_interval {
> @@ -280,9 +285,11 @@ struct ov965x {
> u8 apply_frame_fmt;
> };
>
> -struct i2c_rv {
> - u8 addr;
> - u8 value;
> +struct ov965x_pixfmt {
> + u32 code;
> + u32 colorspace;
> + /* REG_TSLB value, only bits [3:2] may be set. */
> + u8 tslb_reg;
> };
>
> static const struct i2c_rv ov965x_init_regs[] = {
> @@ -342,30 +349,59 @@ struct i2c_rv {
> { REG_NULL, 0 }
> };
>
> -#define NUM_FMT_REGS 14
> -/*
> - * COM7, COM3, COM4, HSTART, HSTOP, HREF, VSTART, VSTOP, VREF,
> - * EXHCH, EXHCL, ADC, OCOM, OFON
> - */
> -static const u8 frame_size_reg_addr[NUM_FMT_REGS] = {
> - 0x12, 0x0c, 0x0d, 0x17, 0x18, 0x32, 0x19, 0x1a, 0x03,
> - 0x2a, 0x2b, 0x37, 0x38, 0x39,
> -};
> -
> -static const u8 ov965x_sxga_regs[NUM_FMT_REGS] = {
> - 0x00, 0x00, 0x00, 0x1e, 0xbe, 0xbf, 0x01, 0x81, 0x12,
> - 0x10, 0x34, 0x81, 0x93, 0x51,
> +static const struct i2c_rv ov965x_sxga_regs[] = {
> + { REG_COM7, 0x00 },
> + { REG_COM3, 0x00 },
> + { REG_COM4, 0x00 },
> + { REG_HSTART, 0x1e },
> + { REG_HSTOP, 0xbe },
> + { 0x32, 0xbf },
> + { REG_VSTART, 0x01 },
> + { REG_VSTOP, 0x81 },
> + { REG_VREF, 0x12 },
> + { REG_EXHCH, 0x10 },
> + { REG_EXHCL, 0x34 },
> + { REG_ADC, 0x81 },
> + { REG_ACOM, 0x93 },
> + { REG_OFON, 0x51 },
> + { REG_NULL, 0 },
> };
>
> -static const u8 ov965x_vga_regs[NUM_FMT_REGS] = {
> - 0x40, 0x04, 0x80, 0x26, 0xc6, 0xed, 0x01, 0x3d, 0x00,
> - 0x10, 0x40, 0x91, 0x12, 0x43,
> +static const struct i2c_rv ov965x_vga_regs[] = {
> + { REG_COM7, 0x40 },
> + { REG_COM3, 0x04 },
> + { REG_COM4, 0x80 },
> + { REG_HSTART, 0x26 },
> + { REG_HSTOP, 0xc6 },
> + { 0x32, 0xed },
> + { REG_VSTART, 0x01 },
> + { REG_VSTOP, 0x3d },
> + { REG_VREF, 0x00 },
> + { REG_EXHCH, 0x10 },
> + { REG_EXHCL, 0x40 },
> + { REG_ADC, 0x91 },
> + { REG_ACOM, 0x12 },
> + { REG_OFON, 0x43 },
> + { REG_NULL, 0 },
> };
>
> /* Determined empirically. */
> -static const u8 ov965x_qvga_regs[NUM_FMT_REGS] = {
> - 0x10, 0x04, 0x80, 0x25, 0xc5, 0xbf, 0x00, 0x80, 0x12,
> - 0x10, 0x40, 0x91, 0x12, 0x43,
> +static const struct i2c_rv ov965x_qvga_regs[] = {
> + { REG_COM7, 0x10 },
> + { REG_COM3, 0x04 },
> + { REG_COM4, 0x80 },
> + { REG_HSTART, 0x25 },
> + { REG_HSTOP, 0xc5 },
> + { 0x32, 0xbf },
> + { REG_VSTART, 0x00 },
> + { REG_VSTOP, 0x80 },
> + { REG_VREF, 0x12 },
> + { REG_EXHCH, 0x10 },
> + { REG_EXHCL, 0x40 },
> + { REG_ADC, 0x91 },
> + { REG_ACOM, 0x12 },
> + { REG_OFON, 0x43 },
> + { REG_NULL, 0 },
> };
>
> static const struct ov965x_framesize ov965x_framesizes[] = {
> @@ -387,13 +423,6 @@ struct i2c_rv {
> },
> };
>
> -struct ov965x_pixfmt {
> - u32 code;
> - u32 colorspace;
> - /* REG_TSLB value, only bits [3:2] may be set. */
> - u8 tslb_reg;
> -};
Any particular reason for moving struct ov965x_pixfmt definition?
> -
> static const struct ov965x_pixfmt ov965x_formats[] = {
> { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 0x00},
> { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG, 0x04},
> @@ -1268,11 +1297,12 @@ static int ov965x_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config
>
> static int ov965x_set_frame_size(struct ov965x *ov965x)
> {
> - int i, ret = 0;
> + int ret = 0;
> +
> + v4l2_dbg(1, debug, ov965x->client, "%s\n", __func__);
>
> - for (i = 0; ret == 0 && i < NUM_FMT_REGS; i++)
> - ret = ov965x_write(ov965x->client, frame_size_reg_addr[i],
> - ov965x->frame_size->regs[i]);
> + ret = ov965x_write_array(ov965x->client,
> + ov965x->frame_size->regs);
> return ret;
> }
>
--
Regards,
Sakari Ailus
e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx
