Hi Giovanni,
On 06/10/17 09:13, juvann@xxxxxxxxxxx wrote:
> TerraTec Cinergy Hybrid T USB XS with demodulator MT352 stop working with kernel 3.xx and newer.
> I have already sent this patch without a success reply, I hope this time you can accept it.
>
> --- /usr/src/linux-3.14.3/drivers/media/usb/em28xx/em28xx-cards.c.orig 2014-05-06 16:59:58.000000000 +0200
> +++ /usr/src/linux-3.14.3/drivers/media/usb/em28xx/em28xx-cards.c 2014-05-07 15:18:31.719524453 +0200
> @@ -2233,7 +2233,7 @@
> { USB_DEVICE(0x0ccd, 0x005e),
> .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
> { USB_DEVICE(0x0ccd, 0x0042),
> - .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
> + .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
> { USB_DEVICE(0x0ccd, 0x0043),
> .driver_info = EM2870_BOARD_TERRATEC_XS },
> { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
>
> This patch is working also on kernel 4.xx I have tested kernel 4.3 and 4.9
I checked the commit that changed the original EM2880_BOARD_TERRATEC_HYBRID_XS
to EM2882_BOARD_TERRATEC_HYBRID_XS and it says this:
commit 9124544320bd36d5aa21769d17a5781ba729aebf
Author: Philippe Bourdin <richel@xxxxxxxxxxxxxx>
Date: Sun Oct 31 09:57:58 2010 -0300
[media] Terratec Cinergy Hybrid T USB XS
I found that the problems people have reported with the USB-TV-stick
"Terratec Cinergy Hybrid T USB XS" (USB-ID: 0ccd:0042)
are coming from a wrong header file in the v4l-sources.
Attached is a diff, which fixes the problem (tested successfully here).
Obviously the USB-ID has been associated with a wrong chip: EM2880
instead of EM2882, which would be correct.
Reported-by: Philippe Bourdin <richel@xxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
So it looks like there are two variants with the same USB ID: one uses
the EM2880, one uses the EM2882. Since nobody else complained I expect
that most devices with this USB ID are in fact using the EM2882.
I won't apply this patch, since that would break it for others.
The best solution for you is to explicitly set the card using the
'card=11' em28xx module option.
I've CC-ed Mauro in case he knows a better solution.
Regards,
Hans
