From: Daniel Scheller <d.scheller@xxxxxxx> Side effect: KERN_DEBUG messages aren't written to the kernel log anymore. This also improves the tda18212_ping reporting a bit so users know that if pinging wasn't successful, bad things will happen. Since in module_init_ddbridge() there's no dev yet, pr_info is used instead. Signed-off-by: Daniel Scheller <d.scheller@xxxxxxx> --- drivers/media/pci/ddbridge/ddbridge-core.c | 78 ++++++++++++++++++------------ 1 file changed, 46 insertions(+), 32 deletions(-) diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c index 9420479bee9a..540a121eadd6 100644 --- a/drivers/media/pci/ddbridge/ddbridge-core.c +++ b/drivers/media/pci/ddbridge/ddbridge-core.c @@ -17,6 +17,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -124,10 +126,10 @@ static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd) ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND); stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ); if (stat == 0) { - printk(KERN_ERR "I2C timeout\n"); + dev_err(&dev->pdev->dev, "I2C timeout\n"); { /* MSI debugging*/ u32 istat = ddbreadl(INTERRUPT_STATUS); - printk(KERN_ERR "IRS %08x\n", istat); + dev_err(&dev->pdev->dev, "IRS %08x\n", istat); ddbwritel(istat, INTERRUPT_ACK); } return -EIO; @@ -533,7 +535,7 @@ static u32 ddb_input_avail(struct ddb_input *input) off = (stat & 0x7ff) << 7; if (ctrl & 4) { - printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl); + dev_err(&dev->pdev->dev, "IA %d %d %08x\n", idx, off, ctrl); ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr)); return 0; } @@ -611,6 +613,7 @@ static int demod_attach_drxk(struct ddb_input *input) struct i2c_adapter *i2c = &input->port->i2c->adap; struct dvb_frontend *fe; struct drxk_config config; + struct device *dev = &input->port->dev->pdev->dev; memset(&config, 0, sizeof(config)); config.microcode_name = "drxk_a3.mc"; @@ -619,7 +622,7 @@ static int demod_attach_drxk(struct ddb_input *input) fe = input->fe = dvb_attach(drxk_attach, &config, i2c); if (!input->fe) { - printk(KERN_ERR "No DRXK found!\n"); + dev_err(dev, "No DRXK found!\n"); return -ENODEV; } fe->sec_priv = input; @@ -632,12 +635,13 @@ static int tuner_attach_tda18271(struct ddb_input *input) { struct i2c_adapter *i2c = &input->port->i2c->adap; struct dvb_frontend *fe; + struct device *dev = &input->port->dev->pdev->dev; if (input->fe->ops.i2c_gate_ctrl) input->fe->ops.i2c_gate_ctrl(input->fe, 1); fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60); if (!fe) { - printk(KERN_ERR "No TDA18271 found!\n"); + dev_err(dev, "No TDA18271 found!\n"); return -ENODEV; } if (input->fe->ops.i2c_gate_ctrl) @@ -670,13 +674,14 @@ static struct stv0367_config ddb_stv0367_config[] = { static int demod_attach_stv0367(struct ddb_input *input) { struct i2c_adapter *i2c = &input->port->i2c->adap; + struct device *dev = &input->port->dev->pdev->dev; /* attach frontend */ input->fe = dvb_attach(stv0367ddb_attach, &ddb_stv0367_config[(input->nr & 1)], i2c); if (!input->fe) { - printk(KERN_ERR "stv0367ddb_attach failed (not found?)\n"); + dev_err(dev, "stv0367ddb_attach failed (not found?)\n"); return -ENODEV; } @@ -690,17 +695,19 @@ static int demod_attach_stv0367(struct ddb_input *input) static int tuner_tda18212_ping(struct ddb_input *input, unsigned short adr) { struct i2c_adapter *adapter = &input->port->i2c->adap; + struct device *dev = &input->port->dev->pdev->dev; + u8 tda_id[2]; u8 subaddr = 0x00; - printk(KERN_DEBUG "stv0367-tda18212 tuner ping\n"); + dev_dbg(dev, "stv0367-tda18212 tuner ping\n"); if (input->fe->ops.i2c_gate_ctrl) input->fe->ops.i2c_gate_ctrl(input->fe, 1); if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0) - printk(KERN_DEBUG "tda18212 ping 1 fail\n"); + dev_dbg(dev, "tda18212 ping 1 fail\n"); if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0) - printk(KERN_DEBUG "tda18212 ping 2 fail\n"); + dev_warn(dev, "tda18212 ping failed, expect problems\n"); if (input->fe->ops.i2c_gate_ctrl) input->fe->ops.i2c_gate_ctrl(input->fe, 0); @@ -711,6 +718,7 @@ static int tuner_tda18212_ping(struct ddb_input *input, unsigned short adr) static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24) { struct i2c_adapter *i2c = &input->port->i2c->adap; + struct device *dev = &input->port->dev->pdev->dev; struct cxd2841er_config cfg; /* the cxd2841er driver expects 8bit/shifted I2C addresses */ @@ -728,7 +736,7 @@ static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24) input->fe = dvb_attach(cxd2841er_attach_t_c, &cfg, i2c); if (!input->fe) { - printk(KERN_ERR "No Sony CXD28xx found!\n"); + dev_err(dev, "No Sony CXD28xx found!\n"); return -ENODEV; } @@ -742,6 +750,7 @@ static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24) static int tuner_attach_tda18212(struct ddb_input *input, u32 porttype) { struct i2c_adapter *adapter = &input->port->i2c->adap; + struct device *dev = &input->port->dev->pdev->dev; struct i2c_client *client; struct tda18212_config config = { .fe = input->fe, @@ -786,7 +795,7 @@ static int tuner_attach_tda18212(struct ddb_input *input, u32 porttype) return 0; err: - printk(KERN_INFO "TDA18212 tuner not found. Device is not fully operational.\n"); + dev_warn(dev, "TDA18212 tuner not found. Device is not fully operational.\n"); return -ENODEV; } @@ -847,19 +856,20 @@ static struct stv6110x_config stv6110b = { static int demod_attach_stv0900(struct ddb_input *input, int type) { struct i2c_adapter *i2c = &input->port->i2c->adap; + struct device *dev = &input->port->dev->pdev->dev; struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; input->fe = dvb_attach(stv090x_attach, feconf, i2c, (input->nr & 1) ? STV090x_DEMODULATOR_1 : STV090x_DEMODULATOR_0); if (!input->fe) { - printk(KERN_ERR "No STV0900 found!\n"); + dev_err(dev, "No STV0900 found!\n"); return -ENODEV; } if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0, 0, (input->nr & 1) ? (0x09 - type) : (0x0b - type))) { - printk(KERN_ERR "No LNBH24 found!\n"); + dev_err(dev, "No LNBH24 found!\n"); return -ENODEV; } return 0; @@ -868,6 +878,7 @@ static int demod_attach_stv0900(struct ddb_input *input, int type) static int tuner_attach_stv6110(struct ddb_input *input, int type) { struct i2c_adapter *i2c = &input->port->i2c->adap; + struct device *dev = &input->port->dev->pdev->dev; struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; struct stv6110x_config *tunerconf = (input->nr & 1) ? &stv6110b : &stv6110a; @@ -875,10 +886,10 @@ static int tuner_attach_stv6110(struct ddb_input *input, int type) ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c); if (!ctl) { - printk(KERN_ERR "No STV6110X found!\n"); + dev_err(dev, "No STV6110X found!\n"); return -ENODEV; } - printk(KERN_INFO "attach tuner input %d adr %02x\n", + dev_info(dev, "attach tuner input %d adr %02x\n", input->nr, tunerconf->addr); feconf->tuner_init = ctl->tuner_init; @@ -1009,13 +1020,14 @@ static int dvb_input_attach(struct ddb_input *input) struct ddb_port *port = input->port; struct dvb_adapter *adap = &input->adap; struct dvb_demux *dvbdemux = &input->demux; + struct device *dev = &input->port->dev->pdev->dev; int sony_osc24 = 0, sony_tspar = 0; ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE, &input->port->dev->pdev->dev, adapter_nr); if (ret < 0) { - printk(KERN_ERR "ddbridge: Could not register adapter.Check if you enabled enough adapters in dvb-core!\n"); + dev_err(dev, "Could not register adapter. Check if you enabled enough adapters in dvb-core!\n"); return ret; } input->attached = 1; @@ -1241,7 +1253,7 @@ static void input_tasklet(unsigned long data) if (input->port->class == DDB_PORT_TUNER) { if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr))) - printk(KERN_ERR "Overflow input %d\n", input->nr); + dev_err(&dev->pdev->dev, "Overflow input %d\n", input->nr); while (input->cbuf != ((input->stat >> 11) & 0x1f) || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) { dvb_dmx_swfilter_packets(&input->demux, @@ -1310,6 +1322,7 @@ static int ddb_ci_attach(struct ddb_port *port) static int ddb_port_attach(struct ddb_port *port) { + struct device *dev = &port->dev->pdev->dev; int ret = 0; switch (port->class) { @@ -1326,7 +1339,7 @@ static int ddb_port_attach(struct ddb_port *port) break; } if (ret < 0) - printk(KERN_ERR "port_attach on port %d failed\n", port->nr); + dev_err(dev, "port_attach on port %d failed\n", port->nr); return ret; } @@ -1377,6 +1390,7 @@ static void ddb_ports_detach(struct ddb *dev) static int init_xo2(struct ddb_port *port) { struct i2c_adapter *i2c = &port->i2c->adap; + struct device *dev = &port->dev->pdev->dev; u8 val, data[2]; int res; @@ -1385,7 +1399,7 @@ static int init_xo2(struct ddb_port *port) return res; if (data[0] != 0x01) { - pr_info("Port %d: invalid XO2\n", port->nr); + dev_info(dev, "Port %d: invalid XO2\n", port->nr); return -1; } @@ -1511,7 +1525,7 @@ static void ddb_port_probe(struct ddb_port *port) port->class = DDB_PORT_CI; ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); } else if (port_has_xo2(port, &xo2_type, &xo2_id)) { - printk(KERN_INFO "Port %d (TAB %d): XO2 type: %d, id: %d\n", + dev_dbg(&dev->pdev->dev, "Port %d (TAB %d): XO2 type: %d, id: %d\n", port->nr, port->nr+1, xo2_type, xo2_id); ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); @@ -1556,10 +1570,10 @@ static void ddb_port_probe(struct ddb_port *port) } break; case DDB_XO2_TYPE_CI: - printk(KERN_INFO "DuoFlex CI modules not supported\n"); + dev_info(&dev->pdev->dev, "DuoFlex CI modules not supported\n"); break; default: - printk(KERN_INFO "Unknown XO2 DuoFlex module\n"); + dev_info(&dev->pdev->dev, "Unknown XO2 DuoFlex module\n"); break; } } else if (port_has_cxd28xx(port, &cxd_id)) { @@ -1611,7 +1625,7 @@ static void ddb_port_probe(struct ddb_port *port) ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING); } - printk(KERN_INFO "Port %d (TAB %d): %s\n", + dev_info(&dev->pdev->dev, "Port %d (TAB %d): %s\n", port->nr, port->nr+1, modname); } @@ -1993,7 +2007,7 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id) dev->pdev = pdev; pci_set_drvdata(pdev, dev); dev->info = (struct ddb_info *) id->driver_data; - printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name); + dev_info(&pdev->dev, "Detected %s\n", dev->info->name); dev->regs = ioremap(pci_resource_start(dev->pdev, 0), pci_resource_len(dev->pdev, 0)); @@ -2001,13 +2015,13 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id) stat = -ENOMEM; goto fail; } - printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4)); + dev_info(&pdev->dev, "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4)); #ifdef CONFIG_PCI_MSI if (pci_msi_enabled()) stat = pci_enable_msi(dev->pdev); if (stat) { - printk(KERN_INFO ": MSI not available.\n"); + dev_info(&pdev->dev, "MSI not available.\n"); } else { irq_flag = 0; dev->msi = 1; @@ -2040,7 +2054,7 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto fail1; ddb_ports_init(dev); if (ddb_buffers_alloc(dev) < 0) { - printk(KERN_INFO ": Could not allocate buffer memory\n"); + dev_err(&pdev->dev, "Could not allocate buffer memory\n"); goto fail2; } if (ddb_ports_attach(dev) < 0) @@ -2050,19 +2064,19 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id) fail3: ddb_ports_detach(dev); - printk(KERN_ERR "fail3\n"); + dev_err(&pdev->dev, "fail3\n"); ddb_ports_release(dev); fail2: - printk(KERN_ERR "fail2\n"); + dev_err(&pdev->dev, "fail2\n"); ddb_buffers_free(dev); fail1: - printk(KERN_ERR "fail1\n"); + dev_err(&pdev->dev, "fail1\n"); if (dev->msi) pci_disable_msi(dev->pdev); if (stat == 0) free_irq(dev->pdev->irq, dev); fail: - printk(KERN_ERR "fail\n"); + dev_err(&pdev->dev, "fail\n"); ddb_unmap(dev); pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); @@ -2242,7 +2256,7 @@ static __init int module_init_ddbridge(void) { int ret; - printk(KERN_INFO "Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n"); + pr_info("Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n"); ret = ddb_class_create(); if (ret < 0) -- 2.13.0
