[PATCH v2 12/19] doc: media/v4l-drivers: Qualcomm Camera Subsystem - PIX Interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update Qualcomm Camera Subsystem driver document for the PIX interface
and format conversion support.

Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
---
 Documentation/media/v4l-drivers/qcom_camss.rst | 41 +++++++++++++++++++-------
 1 file changed, 31 insertions(+), 10 deletions(-)

diff --git a/Documentation/media/v4l-drivers/qcom_camss.rst b/Documentation/media/v4l-drivers/qcom_camss.rst
index 4707ea7..4df5655 100644
--- a/Documentation/media/v4l-drivers/qcom_camss.rst
+++ b/Documentation/media/v4l-drivers/qcom_camss.rst
@@ -45,12 +45,31 @@ Supported functionality
 
 The current version of the driver supports:
 
-- input from camera sensor via CSIPHY;
-- generation of test input data by the TG in CSID;
-- raw dump of the input data to memory. RDI interface of VFE is supported.
-  PIX interface (ISP processing, statistics engines, resize/crop, format
-  conversion) is not supported in the current version;
-- concurrent and independent usage of two data inputs - could be camera sensors
+- Input from camera sensor via CSIPHY;
+- Generation of test input data by the TG in CSID;
+- RDI interface of VFE - raw dump of the input data to memory.
+
+  Supported formats:
+
+  - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2);
+  - MIPI RAW8 (8bit Bayer RAW);
+  - MIPI RAW10 (10bit packed Bayer RAW);
+  - MIPI RAW12 (12bit packed Bayer RAW).
+
+- PIX interface of VFE
+
+  - Format conversion of the input data.
+
+    Supported input formats:
+
+    - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2).
+
+    Supported output formats:
+
+    - NV12/NV21 (two plane YUV 4:2:0);
+    - NV16/NV61 (two plane YUV 4:2:2).
+
+- Concurrent and independent usage of two data inputs - could be camera sensors
   and/or TG.
 
 
@@ -65,15 +84,15 @@ interface, the driver is split into V4L2 sub-devices as follows:
 - 2 CSID sub-devices - each CSID is represented by a single sub-device;
 - 2 ISPIF sub-devices - ISPIF is represented by a number of sub-devices equal
   to the number of CSID sub-devices;
-- 3 VFE sub-devices - VFE is represented by a number of sub-devices equal to
-  the number of RDI input interfaces.
+- 4 VFE sub-devices - VFE is represented by a number of sub-devices equal to
+  the number of the input interfaces (3 RDI and 1 PIX).
 
 The considerations to split the driver in this particular way are as follows:
 
 - representing CSIPHY and CSID modules by a separate sub-device for each module
   allows to model the hardware links between these modules;
-- representing VFE by a separate sub-devices for each RDI input interface allows
-  to use the three RDI interfaces concurently and independently as this is
+- representing VFE by a separate sub-devices for each input interface allows
+  to use the input interfaces concurently and independently as this is
   supported by the hardware;
 - representing ISPIF by a number of sub-devices equal to the number of CSID
   sub-devices allows to create linear media controller pipelines when using two
@@ -99,6 +118,8 @@ nodes) is as follows:
 - msm_vfe0_video1
 - msm_vfe0_rdi2
 - msm_vfe0_video2
+- msm_vfe0_pix
+- msm_vfe0_video3
 
 
 Implementation
-- 
1.9.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux