Hi Hugues
On 05/05/2017 05:31 PM, Hugues Fruchet wrote:
This patchset introduces a basic support for Digital Camera Memory Interface
(DCMI) of STMicroelectronics STM32 SoC series.
This first basic support implements RGB565 & YUV frame grabbing.
Cropping and JPEG support will be added later on.
This has been tested on STM324x9I-EVAL evaluation board embedding
an OV2640 camera sensor.
.....
Hugues Fruchet (8):
dt-bindings: Document STM32 DCMI bindings
[media] stm32-dcmi: STM32 DCMI camera interface driver
ARM: dts: stm32: Enable DCMI support on STM32F429 MCU
ARM: dts: stm32: Enable DCMI camera interface on STM32F429-EVAL board
ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL
board
ARM: dts: stm32: Enable OV2640 camera support of STM32F429-EVAL board
ARM: configs: stm32: STMPE1600 GPIO expander
ARM: configs: stm32: DCMI + OV2640 camera support
.../devicetree/bindings/media/st,stm32-dcmi.txt | 46 +
arch/arm/boot/dts/stm32429i-eval.dts | 56 +
arch/arm/boot/dts/stm32f429.dtsi | 37 +
arch/arm/configs/stm32_defconfig | 9 +
drivers/media/platform/Kconfig | 12 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/stm32/Makefile | 1 +
drivers/media/platform/stm32/stm32-dcmi.c | 1403 ++++++++++++++++++++
8 files changed, 1566 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
create mode 100644 drivers/media/platform/stm32/Makefile
create mode 100644 drivers/media/platform/stm32/stm32-dcmi.c
Patches 3, 4, 5, 6 applied on stm32-dt-for-v4.13
Patch 7 applied on stm32-defconfig-for-v4.13
Patch 8 will not be applied: As SDRAM used on STM32 MCUs is small,
I don't want to penalize other users:
- by increasing static kernel size
- by enabling devices which consume dynamically lot of memory
User will be free to enable it through menuconfig.
Regards
Alex
