[PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Antonio Ospite <ospite@xxxxxxxxxxxxxxxxx>
Signed-off-by: Bart Visscher <bartv@xxxxxxxxxx>
---

Changes since previous version:
  Addressed all the comments from Eric and Guennadi.

CAM_RST gpios are different for different platform generations, as also
shown in current MFP pins setup.


 arch/arm/mach-pxa/ezx.c |  164 +++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 164 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 588b265..7cfd633 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,8 +17,11 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 
+#include <media/soc_camera.h>
+
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,6 +32,7 @@
 #include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -38,6 +42,9 @@
 #define GPIO15_A910_FLIP_LID 		15
 #define GPIO12_E680_LOCK_SWITCH 	12
 #define GPIO15_E6_LOCK_SWITCH 		15
+#define GPIO50_nCAM_EN			50
+#define GPIO19_GEN1_CAM_RST		19
+#define GPIO28_GEN2_CAM_RST		28
 
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
@@ -683,8 +690,85 @@ static struct platform_device a780_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a780_pxacamera_init(struct device *dev)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO19_GEN1_CAM_RST is active high
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 0);
+	gpio_direction_output(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a780_pxacamera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a780_pxacamera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+	.init	= a780_pxacamera_init,
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+	.bus_id         = 0,
+	.flags          = SOCAM_SENSOR_INVERT_PCLK,
+	.i2c_adapter_id = 0,
+	.board_info     = &a780_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a780_pxacamera_power,
+	.reset          = a780_pxacamera_reset,
+};
+
+static struct platform_device a780_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a780_iclink,
+	},
+};
+
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
+	&a780_camera,
 };
 
 static void __init a780_init(void)
@@ -699,6 +783,8 @@ static void __init a780_init(void)
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
+	pxa_set_camera_info(&a780_pxacamera_platform_data);
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
@@ -864,8 +950,84 @@ static struct platform_device a910_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a910_pxacamera_init(struct device *dev)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO28_GEN2_CAM_RST is active high
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 0);
+	gpio_direction_output(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a910_pxacamera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a910_pxacamera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+	.init	= a910_pxacamera_init,
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+	.bus_id         = 0,
+	.i2c_adapter_id = 0,
+	.board_info     = &a910_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a910_pxacamera_power,
+	.reset          = a910_pxacamera_reset,
+};
+
+static struct platform_device a910_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a910_iclink,
+	},
+};
+
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
+	&a910_camera,
 };
 
 static void __init a910_init(void)
@@ -880,6 +1042,8 @@ static void __init a910_init(void)
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
+	pxa_set_camera_info(&a910_pxacamera_platform_data);
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
-- 
1.6.5.2

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux