Add bindings documentation for the video multiplexer device. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> Acked-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: Pavel Machek <pavel@xxxxxx> --- No changes since [1]. [1] https://patchwork.linuxtv.org/patch/41475/ --- .../devicetree/bindings/media/video-mux.txt | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/video-mux.txt diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt new file mode 100644 index 0000000000000..63b9dc913e456 --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-mux.txt @@ -0,0 +1,60 @@ +Video Multiplexer +================= + +Video multiplexers allow to select between multiple input ports. Video received +on the active input port is passed through to the output port. Muxes described +by this binding are controlled by a multiplexer controller that is described by +the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt + +Required properties: +- compatible : should be "video-mux" +- mux-controls : mux controller node to use for operating the mux +- #address-cells: should be <1> +- #size-cells: should be <0> +- port@*: at least three port nodes containing endpoints connecting to the + source and sink devices according to of_graph bindings. The last port is + the output port, all others are inputs. + +Optionally, #address-cells, #size-cells, and port nodes can be grouped under a +ports node as described in Documentation/devicetree/bindings/graph.txt. + +Example: + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + video-mux { + compatible = "video-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mux_in0: endpoint { + remote-endpoint = <&video_source0_out>; + }; + }; + + port@1 { + reg = <1>; + + mux_in1: endpoint { + remote-endpoint = <&video_source1_out>; + }; + }; + + port@2 { + reg = <2>; + + mux_out: endpoint { + remote-endpoint = <&capture_interface_in>; + }; + }; + }; +}; -- 2.11.0
