Hi Rajmohan,
Thankd for the update. A few more comments I missed earlier.
On Thu, May 25, 2017 at 06:50:35PM -0700, Rajmohan Mani wrote:
> DW9714 is a 10 bit DAC, designed for linear
> control of voice coil motor.
>
> This driver creates a V4L2 subdevice and
> provides control to set the desired focus.
>
> Signed-off-by: Rajmohan Mani <rajmohan.mani@xxxxxxxxx>
> ---
> Changes in v5:
> - Addressed review comments from Tomasz, Sakari and Sylwester on v4
> of this patch
> Changes in v4:
> - Addressed review comments from Tomasz
> Changes in v3:
> - Addressed most of the review comments from Sakari
> on v1 of this patch
> Changes in v2:
> - Addressed review comments from Hans Verkuil
> - Fixed a debug message typo
> - Got rid of a return variable
> ---
> drivers/media/i2c/Kconfig | 9 ++
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/dw9714.c | 292 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 302 insertions(+)
> create mode 100644 drivers/media/i2c/dw9714.c
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index fd181c9..516e2f2 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -300,6 +300,15 @@ config VIDEO_AD5820
> This is a driver for the AD5820 camera lens voice coil.
> It is used for example in Nokia N900 (RX-51).
>
> +config VIDEO_DW9714
> + tristate "DW9714 lens voice coil support"
> + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER && VIDEO_V4L2_SUBDEV_API
This would be better split on two lines.
> + ---help---
> + This is a driver for the DW9714 camera lens voice coil.
> + DW9714 is a 10 bit DAC with 120mA output current sink
> + capability. This is designed for linear control of
> + voice coil motors, controlled via I2C serial interface.
> +
> config VIDEO_SAA7110
> tristate "Philips SAA7110 video decoder"
> depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 62323ec..987bd1f 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
> obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
> obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o
> obj-$(CONFIG_VIDEO_AD5820) += ad5820.o
> +obj-$(CONFIG_VIDEO_DW9714) += dw9714.o
> obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
> obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
> obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
> diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
> new file mode 100644
> index 0000000..22c84de
> --- /dev/null
> +++ b/drivers/media/i2c/dw9714.c
> @@ -0,0 +1,292 @@
> +/*
> + * Copyright (c) 2015--2017 Intel Corporation.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +
> +#define DW9714_NAME "dw9714"
> +#define DW9714_MAX_FOCUS_POS 1023
> +/*
> + * This acts as the minimum granularity of lens movement.
> + * Keep this value power of 2, so the control steps can be
> + * uniformly adjusted for gradual lens movement, with desired
> + * number of control steps.
> + */
> +#define DW9714_CTRL_STEPS 16
> +#define DW9714_CTRL_DELAY_US 1000
> +/*
> + * S[3:2] = 0x00, codes per step for "Linear Slope Control"
> + * S[1:0] = 0x00, step period
> + */
> +#define DW9714_DEFAULT_S 0x0
> +#define DW9714_VAL(data, s) ((data) << 4 | (s))
> +
> +/* dw9714 device structure */
> +struct dw9714_device {
> + struct i2c_client *client;
> + struct v4l2_ctrl_handler ctrls_vcm;
> + struct v4l2_subdev sd;
> + u16 current_val;
> +};
> +
> +static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl)
> +{
> + return container_of(ctrl->handler, struct dw9714_device, ctrls_vcm);
> +}
> +
> +static inline struct dw9714_device *sd_to_dw9714_vcm(struct v4l2_subdev *subdev)
> +{
> + return container_of(subdev, struct dw9714_device, sd);
> +}
> +
> +static int dw9714_i2c_write(struct i2c_client *client, u16 data)
> +{
> + int ret;
> + u16 val = cpu_to_be16(data);
> +
> + ret = i2c_master_send(client, (const char *)&val, sizeof(val));
> + if (ret != sizeof(val)) {
> + dev_err(&client->dev, "I2C write fail\n");
> + return -EIO;
> + }
> + return 0;
> +}
> +
> +static int dw9714_t_focus_vcm(struct dw9714_device *dw9714_dev, u16 val)
> +{
> + struct i2c_client *client = dw9714_dev->client;
> +
> + dw9714_dev->current_val = val;
> +
> + return dw9714_i2c_write(client, DW9714_VAL(val, DW9714_DEFAULT_S));
> +}
> +
> +static int dw9714_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct dw9714_device *dev_vcm = to_dw9714_vcm(ctrl);
> +
> + if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE)
> + return dw9714_t_focus_vcm(dev_vcm, ctrl->val);
> +
> + return -EINVAL;
> +}
> +
> +static const struct v4l2_ctrl_ops dw9714_vcm_ctrl_ops = {
> + .s_ctrl = dw9714_set_ctrl,
> +};
> +
> +static int dw9714_init_controls(struct dw9714_device *dev_vcm)
It'd be nicer to arrange dw9714_init_controls() and dw9714_subdev_cleanup()
that are both related to probe() and remove() closer to the functions that
call them.
> +{
> + struct v4l2_ctrl_handler *hdl = &dev_vcm->ctrls_vcm;
> + const struct v4l2_ctrl_ops *ops = &dw9714_vcm_ctrl_ops;
> + struct i2c_client *client = dev_vcm->client;
> +
> + v4l2_ctrl_handler_init(hdl, 1);
> +
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE,
> + 0, DW9714_MAX_FOCUS_POS, DW9714_CTRL_STEPS, 0);
> +
> + if (hdl->error)
> + dev_err(&client->dev, "dw9714_init_controls fail\n");
> + dev_vcm->sd.ctrl_handler = hdl;
> + return hdl->error;
> +}
> +
> +static void dw9714_subdev_cleanup(struct dw9714_device *dw9714_dev)
> +{
> + v4l2_async_unregister_subdev(&dw9714_dev->sd);
> + v4l2_device_unregister_subdev(&dw9714_dev->sd);
v4l2_device_unregister_subdev() is extra; v4l2_async_unregiste_subdev()
already calls it.
> + v4l2_ctrl_handler_free(&dw9714_dev->ctrls_vcm);
> + media_entity_cleanup(&dw9714_dev->sd.entity);
> +}
> +
> +static int dw9714_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> + struct device *dev = &dw9714_dev->client->dev;
> + int rval;
> +
> + rval = pm_runtime_get_sync(dev);
> + if (rval < 0) {
> + pm_runtime_put_noidle(dev);
> + return rval;
> + }
> +
> + return 0;
> +}
> +
> +static int dw9714_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> + struct device *dev = &dw9714_dev->client->dev;
> +
> + pm_runtime_put(dev);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_internal_ops dw9714_int_ops = {
> + .open = dw9714_open,
> + .close = dw9714_close,
> +};
> +
> +static const struct v4l2_subdev_ops dw9714_ops = { };
> +
> +static int dw9714_probe(struct i2c_client *client,
> + const struct i2c_device_id *devid)
> +{
> + struct dw9714_device *dw9714_dev;
> + int rval;
> +
> + dw9714_dev = devm_kzalloc(&client->dev, sizeof(*dw9714_dev),
> + GFP_KERNEL);
> +
No need for a newline here.
> + if (dw9714_dev == NULL)
> + return -ENOMEM;
> +
> + dw9714_dev->client = client;
> +
> + v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> + dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + dw9714_dev->sd.internal_ops = &dw9714_int_ops;
> +
> + rval = dw9714_init_controls(dw9714_dev);
> + if (rval)
> + goto err_cleanup;
> +
> + rval = media_entity_pads_init(&dw9714_dev->sd.entity, 0, NULL);
> + if (rval < 0)
> + goto err_cleanup;
> +
> + dw9714_dev->sd.entity.function = MEDIA_ENT_F_LENS;
> +
> + rval = v4l2_async_register_subdev(&dw9714_dev->sd);
> + if (rval < 0)
> + goto err_cleanup;
> +
> + pm_runtime_enable(&client->dev);
> +
> + return 0;
> +
> +err_cleanup:
> + dw9714_subdev_cleanup(dw9714_dev);
> + dev_err(&client->dev, "Probe failed: %d\n", rval);
> + return rval;
> +}
> +
> +static int dw9714_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> +
> + pm_runtime_disable(&client->dev);
> + dw9714_subdev_cleanup(dw9714_dev);
> +
> + return 0;
> +}
> +
> +/*
> + * This function sets the vcm position, so it consumes least current
> + * The lens position is gradually moved in units of DW9714_CTRL_STEPS,
> + * to make the movements smoothly.
> + */
> +static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> + int ret, val;
> +
> + for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
> + val >= 0; val -= DW9714_CTRL_STEPS) {
> + ret = dw9714_i2c_write(client,
> + DW9714_VAL(val, DW9714_DEFAULT_S));
> + if (ret)
> + dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
> + usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
> + }
> + return 0;
> +}
> +
> +/*
> + * This function sets the vcm position to the value set by the user
> + * through v4l2_ctrl_ops s_ctrl handler
> + * The lens position is gradually moved in units of DW9714_CTRL_STEPS,
> + * to make the movements smoothly.
> + */
> +static int __maybe_unused dw9714_vcm_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> + int ret, val;
> +
> + for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> + val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> + val += DW9714_CTRL_STEPS) {
> + ret = dw9714_i2c_write(client,
> + DW9714_VAL(val, DW9714_DEFAULT_S));
> + if (ret)
> + dev_err_ratelimited(dev, "%s I2C failure: %d",
> + __func__, ret);
> + usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id dw9714_acpi_match[] = {
> + {"DW9714", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, dw9714_acpi_match);
> +#endif
> +
> +static const struct i2c_device_id dw9714_id_table[] = {
> + {DW9714_NAME, 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, dw9714_id_table);
> +
> +static const struct dev_pm_ops dw9714_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(dw9714_vcm_suspend, dw9714_vcm_resume)
> + SET_RUNTIME_PM_OPS(dw9714_vcm_suspend, dw9714_vcm_resume, NULL)
> +};
> +
> +static struct i2c_driver dw9714_i2c_driver = {
> + .driver = {
> + .name = DW9714_NAME,
> + .pm = &dw9714_pm_ops,
> + .acpi_match_table = ACPI_PTR(dw9714_acpi_match),
> + },
> + .probe = dw9714_probe,
> + .remove = dw9714_remove,
> + .id_table = dw9714_id_table,
> +};
> +
> +module_i2c_driver(dw9714_i2c_driver);
> +
> +MODULE_AUTHOR("Tianshu Qiu <tian.shu.qiu@xxxxxxxxx>");
> +MODULE_AUTHOR("Jian Xu Zheng <jian.xu.zheng@xxxxxxxxx>");
> +MODULE_AUTHOR("Yuning Pu <yuning.pu@xxxxxxxxx>");
> +MODULE_AUTHOR("Jouni Ukkonen <jouni.ukkonen@xxxxxxxxx>");
> +MODULE_AUTHOR("Tommi Franttila <tommi.franttila@xxxxxxxxx>");
> +MODULE_DESCRIPTION("DW9714 VCM driver");
> +MODULE_LICENSE("GPL");
--
Kind regards,
Sakari Ailus
e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx
