From: Rajmohan Mani <rajmohan.mani@xxxxxxxxx>
DW9714 is a 10 bit DAC, designed for linear
control of voice coil motor.
This driver creates a V4L2 subdevice and
provides control to set the desired focus.
Signed-off-by: Rajmohan Mani <rajmohan.mani@xxxxxxxxx>
---
drivers/media/i2c/Kconfig | 9 ++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/dw9714.c | 333 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 343 insertions(+)
create mode 100644 drivers/media/i2c/dw9714.c
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index fd181c9..4f0a7ad 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -300,6 +300,15 @@ config VIDEO_AD5820
This is a driver for the AD5820 camera lens voice coil.
It is used for example in Nokia N900 (RX-51).
+config VIDEO_DW9714
+ tristate "DW9714 lens voice coil support"
+ depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ ---help---
+ This is a driver for the DW9714 camera lens voice coil.
+ DW9714 is a 10 bit DAC with 120mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 62323ec..987bd1f 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o
obj-$(CONFIG_VIDEO_AD5820) += ad5820.o
+obj-$(CONFIG_VIDEO_DW9714) += dw9714.o
obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
new file mode 100644
index 0000000..276d3f2
--- /dev/null
+++ b/drivers/media/i2c/dw9714.c
@@ -0,0 +1,333 @@
+/*
+ * Copyright (c) 2015--2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+
+#define DW9714_NAME "dw9714"
+#define DW9714_MAX_FOCUS_POS 1023
+#define DW9714_CTRL_STEPS 16 /* Keep this value power of 2 */
+#define DW9714_CTRL_DELAY_US 1000
+/*
+ * S[3:2] = 0x00, codes per step for "Linear Slope Control"
+ * S[1:0] = 0x00, step period
+ */
+#define DW9714_DEFAULT_S 0x0
+#define DW9714_VAL(data, s) (u16)((data) << 4 | (s))
+
+/* dw9714 device structure */
+struct dw9714_device {
+ struct i2c_client *client;
+ struct v4l2_ctrl_handler ctrls_vcm;
+ struct v4l2_subdev sd;
+ u16 current_val;
+};
+
+#define to_dw9714_vcm(_ctrl) \
+ container_of(_ctrl->handler, struct dw9714_device, ctrls_vcm)
+
+static int dw9714_i2c_write(struct i2c_client *client, u16 data)
+{
+ const int num_msg = 1;
+ int ret;
+ u16 val = cpu_to_be16(data);
+ struct i2c_msg msg = {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(val),
+ .buf = (u8 *) &val,
+ };
+
+ ret = i2c_transfer(client->adapter, &msg, num_msg);
+
+ /*One retry */
+ if (ret != num_msg)
+ ret = i2c_transfer(client->adapter, &msg, num_msg);
+
+ if (ret != num_msg) {
+ dev_err(&client->dev, "I2C write fail fail\n");
+ return -EIO;
+ } else {
+ return 0;
+ }
+}
+
+static int dw9714_t_focus_vcm(struct dw9714_device *dw9714_dev, u16 val)
+{
+ struct i2c_client *client = dw9714_dev->client;
+ int ret = -EINVAL;
+
+ dev_dbg(&client->dev, "Setting new value VCM: %d\n", val);
+ dw9714_dev->current_val = val;
+
+ ret = dw9714_i2c_write(client, DW9714_VAL(val, DW9714_DEFAULT_S));
+ return ret;
+}
+
+static int dw9714_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct dw9714_device *dev_vcm = to_dw9714_vcm(ctrl);
+
+ if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE)
+ return dw9714_t_focus_vcm(dev_vcm, ctrl->val);
+ else
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops dw9714_vcm_ctrl_ops = {
+ .s_ctrl = dw9714_set_ctrl,
+};
+
+static int dw9714_init_controls(struct dw9714_device *dev_vcm)
+{
+ struct v4l2_ctrl_handler *hdl = &dev_vcm->ctrls_vcm;
+ const struct v4l2_ctrl_ops *ops = &dw9714_vcm_ctrl_ops;
+ struct i2c_client *client = dev_vcm->client;
+
+ v4l2_ctrl_handler_init(hdl, 1);
+
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE,
+ 0, DW9714_MAX_FOCUS_POS, 1, 0);
+
+ if (hdl->error)
+ dev_err(&client->dev, "dw9714_init_controls fail\n");
+ dev_vcm->sd.ctrl_handler = hdl;
+ return hdl->error;
+}
+
+static void dw9714_subdev_cleanup(struct dw9714_device *dw9714_dev)
+{
+ v4l2_ctrl_handler_free(&dw9714_dev->ctrls_vcm);
+ v4l2_async_unregister_subdev(&dw9714_dev->sd);
+ v4l2_device_unregister_subdev(&dw9714_dev->sd);
+ media_entity_cleanup(&dw9714_dev->sd.entity);
+}
+
+static int dw9714_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct dw9714_device *dw9714_dev = container_of(sd,
+ struct dw9714_device,
+ sd);
+ struct device *dev = &dw9714_dev->client->dev;
+ int rval;
+
+ rval = pm_runtime_get_sync(dev);
+ dev_dbg(dev, "%s rval = %d\n", __func__, rval);
+
+ return rval;
+}
+
+static int dw9714_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct dw9714_device *dw9714_dev = container_of(sd,
+ struct dw9714_device,
+ sd);
+ struct device *dev = &dw9714_dev->client->dev;
+
+ dev_dbg(dev, "%s\n", __func__);
+ pm_runtime_put(dev);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops dw9714_int_ops = {
+ .open = dw9714_open,
+ .close = dw9714_close,
+};
+
+static const struct v4l2_subdev_ops dw9714_ops = { };
+
+static int dw9714_probe(struct i2c_client *client,
+ const struct i2c_device_id *devid)
+{
+ struct dw9714_device *dw9714_dev;
+ int rval;
+
+ dw9714_dev = devm_kzalloc(&client->dev, sizeof(*dw9714_dev),
+ GFP_KERNEL);
+
+ if (dw9714_dev == NULL)
+ return -ENOMEM;
+
+ dw9714_dev->client = client;
+
+ v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
+ dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ dw9714_dev->sd.internal_ops = &dw9714_int_ops;
+
+ snprintf(dw9714_dev->sd.name,
+ sizeof(dw9714_dev->sd.name),
+ DW9714_NAME " %d-%4.4x", i2c_adapter_id(client->adapter),
+ client->addr);
+
+ rval = dw9714_init_controls(dw9714_dev);
+ if (rval)
+ goto err_cleanup;
+
+ rval = media_entity_pads_init(&dw9714_dev->sd.entity, 0, NULL);
+ if (rval < 0)
+ goto err_cleanup;
+
+ dw9714_dev->sd.entity.function = MEDIA_ENT_F_LENS;
+
+ rval = v4l2_async_register_subdev(&dw9714_dev->sd);
+ if (rval < 0)
+ goto err_cleanup;
+
+ pm_runtime_enable(&client->dev);
+
+ return 0;
+
+err_cleanup:
+ dw9714_subdev_cleanup(dw9714_dev);
+ dev_err(&client->dev, "Probe failed: %d\n", rval);
+ return rval;
+}
+
+static int dw9714_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct dw9714_device *dw9714_dev = container_of(sd,
+ struct dw9714_device,
+ sd);
+
+ pm_runtime_disable(&client->dev);
+ dw9714_subdev_cleanup(dw9714_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int dw9714_runtime_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int dw9714_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+
+/* This function sets the vcm position, so it consumes least current */
+static int dw9714_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct dw9714_device *dw9714_dev = container_of(sd,
+ struct dw9714_device,
+ sd);
+ int ret, val;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
+ val >= 0; val -= DW9714_CTRL_STEPS) {
+ ret = dw9714_i2c_write(client,
+ DW9714_VAL((u16) val, DW9714_DEFAULT_S));
+ if (ret)
+ dev_err(dev, "%s I2C failure: %d", __func__, ret);
+ usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
+ }
+ return 0;
+}
+
+/*
+ * This function sets the vcm position, so the focus position is set
+ * closer to the camera
+ */
+static int dw9714_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct dw9714_device *dw9714_dev = container_of(sd,
+ struct dw9714_device,
+ sd);
+ int ret, val;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
+ val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
+ val += DW9714_CTRL_STEPS) {
+ ret = dw9714_i2c_write(client,
+ DW9714_VAL((u16) val, DW9714_DEFAULT_S));
+ if (ret)
+ dev_err(dev, "%s I2C failure: %d", __func__, ret);
+ usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
+ }
+
+ /* restore v4l2 control values */
+ ret = v4l2_ctrl_handler_setup(&dw9714_dev->ctrls_vcm);
+ dev_dbg(dev, "%s ret = %d\n", __func__, ret);
+ return ret;
+}
+
+#else
+
+#define dw9714_suspend NULL
+#define dw9714_resume NULL
+#define dw9714_runtime_suspend NULL
+#define dw9714_runtime_resume NULL
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id dw9714_acpi_match[] = {
+ {"DW9714", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, dw9714_acpi_match);
+#endif
+
+static const struct i2c_device_id dw9714_id_table[] = {
+ {DW9714_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, dw9714_id_table);
+
+static const struct dev_pm_ops dw9714_pm_ops = {
+ .suspend = dw9714_suspend,
+ .resume = dw9714_resume,
+ .runtime_suspend = dw9714_runtime_suspend,
+ .runtime_resume = dw9714_runtime_resume,
+};
+
+static struct i2c_driver dw9714_i2c_driver = {
+ .driver = {
+ .name = DW9714_NAME,
+ .pm = &dw9714_pm_ops,
+#ifdef CONFIG_ACPI
+ .acpi_match_table = ACPI_PTR(dw9714_acpi_match),
+#endif
+ },
+ .probe = dw9714_probe,
+ .remove = dw9714_remove,
+ .id_table = dw9714_id_table,
+};
+
+module_i2c_driver(dw9714_i2c_driver);
+
+MODULE_AUTHOR("Tianshu Qiu <tian.shu.qiu@xxxxxxxxx>");
+MODULE_AUTHOR("Jian Xu Zheng <jian.xu.zheng@xxxxxxxxx>");
+MODULE_AUTHOR("Yuning Pu <yuning.pu@xxxxxxxxx>");
+MODULE_AUTHOR("Jouni Ukkonen <jouni.ukkonen@xxxxxxxxx>");
+MODULE_AUTHOR("Tommi Franttila <tommi.franttila@xxxxxxxxx>");
+MODULE_DESCRIPTION("DW9714 VCM driver");
+MODULE_LICENSE("GPL");
--
1.9.1
