Fix for warnings reported by checkpatch.pl:
- Multiline comment style
- Bare "unsigned"
- Missing blank line after declarations
- Un-needed braces around single-statement branch
Signed-off-by: Avraham Shukron <avraham.shukron@xxxxxxxxx>
---
.../platform/intel-mid/atomisp_gmin_platform.c | 45 ++++++++++++++--------
.../platform/intel-mid/intel_mid_pcihelpers.c | 9 +++--
2 files changed, 35 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/media/atomisp/platform/intel-mid/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/platform/intel-mid/atomisp_gmin_platform.c
index 7ebefb3..fac03a0 100644
--- a/drivers/staging/media/atomisp/platform/intel-mid/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/platform/intel-mid/atomisp_gmin_platform.c
@@ -119,7 +119,7 @@ static int af_power_ctrl(struct v4l2_subdev *subdev, int flag)
/*
* The power here is used for dw9817,
* regulator is from rear sensor
- */
+ */
if (gs->v2p8_vcm_reg) {
if (flag)
return regulator_enable(gs->v2p8_vcm_reg);
@@ -167,7 +167,8 @@ int atomisp_register_i2c_module(struct v4l2_subdev *subdev,
* uses ACPI runtime power management for camera devices, but
* we don't. Disable it, or else the rails will be needlessly
* tickled during suspend/resume. This has caused power and
- * performance issues on multiple devices. */
+ * performance issues on multiple devices.
+ */
adev = ACPI_COMPANION(&client->dev);
if (adev)
adev->power.flags.power_resources = 0;
@@ -182,7 +183,8 @@ int atomisp_register_i2c_module(struct v4l2_subdev *subdev,
/* Note subtlety of initialization order: at the point where
* this registration API gets called, the platform data
* callbacks have probably already been invoked, so the
- * gmin_subdev struct is already initialized for us. */
+ * gmin_subdev struct is already initialized for us.
+ */
gs = find_gmin_subdev(subdev);
pdata.subdevs[i].type = type;
@@ -206,8 +208,10 @@ struct v4l2_subdev *atomisp_gmin_find_subdev(struct i2c_adapter *adapter,
struct i2c_board_info *board_info)
{
int i;
+
for (i = 0; i < MAX_SUBDEVS && pdata.subdevs[i].type; i++) {
struct intel_v4l2_subdev_table *sd = &pdata.subdevs[i];
+
if (sd->v4l2_subdev.i2c_adapter_id == adapter->nr &&
sd->v4l2_subdev.board_info.addr == board_info->addr)
return sd->subdev;
@@ -261,7 +265,8 @@ static const struct gmin_cfg_var ffrd8_vars[] = {
};
/* Cribbed from MCG defaults in the mt9m114 driver, not actually verified
- * vs. T100 hardware */
+ * vs. T100 hardware
+ */
static const struct gmin_cfg_var t100_vars[] = {
{ "INT33F0:00_CsiPort", "0" },
{ "INT33F0:00_CsiLanes", "1" },
@@ -345,10 +350,8 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
struct device *dev;
struct i2c_client *client = v4l2_get_subdevdata(subdev);
- if (!pmic_id) {
-
- pmic_id = PMIC_REGULATOR;
- }
+ if (!pmic_id)
+ pmic_id = PMIC_REGULATOR;
if (!client)
return NULL;
@@ -401,7 +404,8 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
* API is broken with the current drivers, returning
* "1" for a regulator that will then emit a
* "unbalanced disable" WARNing if we try to disable
- * it. */
+ * it.
+ */
}
return &gmin_subdevs[i];
@@ -410,6 +414,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev)
{
int i;
+
for (i = 0; i < MAX_SUBDEVS; i++)
if (gmin_subdevs[i].subdev == subdev)
return &gmin_subdevs[i];
@@ -419,6 +424,7 @@ static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev)
static int gmin_gpio0_ctrl(struct v4l2_subdev *subdev, int on)
{
struct gmin_subdev *gs = find_gmin_subdev(subdev);
+
if (gs && gs->gpio0) {
gpiod_set_value(gs->gpio0, on);
return 0;
@@ -429,6 +435,7 @@ static int gmin_gpio0_ctrl(struct v4l2_subdev *subdev, int on)
static int gmin_gpio1_ctrl(struct v4l2_subdev *subdev, int on)
{
struct gmin_subdev *gs = find_gmin_subdev(subdev);
+
if (gs && gs->gpio1) {
gpiod_set_value(gs->gpio1, on);
return 0;
@@ -531,6 +538,7 @@ int gmin_flisclk_ctrl(struct v4l2_subdev *subdev, int on)
{
int ret = 0;
struct gmin_subdev *gs = find_gmin_subdev(subdev);
+
if (on)
ret = vlv2_plat_set_clock_freq(gs->clock_num, gs->clock_src);
if (ret)
@@ -595,6 +603,7 @@ struct camera_sensor_platform_data *gmin_camera_platform_data(
enum atomisp_bayer_order csi_bayer)
{
struct gmin_subdev *gs = find_gmin_subdev(subdev);
+
gs->csi_fmt = csi_format;
gs->csi_bayer = csi_bayer;
@@ -617,8 +626,10 @@ EXPORT_SYMBOL_GPL(atomisp_gmin_register_vcm_control);
/* Retrieves a device-specific configuration variable. The dev
* argument should be a device with an ACPI companion, as all
- * configuration is based on firmware ID. */
-int gmin_get_config_var(struct device *dev, const char *var, char *out, size_t *out_len)
+ * configuration is based on firmware ID.
+ */
+int gmin_get_config_var(struct device *dev, const char *var, char *out,
+ size_t *out_len)
{
char var8[CFG_VAR_NAME_MAX];
efi_char16_t var16[CFG_VAR_NAME_MAX];
@@ -640,7 +651,8 @@ int gmin_get_config_var(struct device *dev, const char *var, char *out, size_t *
/* First check a hard-coded list of board-specific variables.
* Some device firmwares lack the ability to set EFI variables at
- * runtime. */
+ * runtime.
+ */
for (i = 0; i < ARRAY_SIZE(hard_vars); i++) {
if (dmi_match(DMI_BOARD_NAME, hard_vars[i].dmi_board_name)) {
for (j = 0; hard_vars[i].vars[j].name; j++) {
@@ -665,7 +677,8 @@ int gmin_get_config_var(struct device *dev, const char *var, char *out, size_t *
}
/* Our variable names are ASCII by construction, but EFI names
- * are wide chars. Convert and zero-pad. */
+ * are wide chars. Convert and zero-pad.
+ */
memset(var16, 0, sizeof(var16));
for (i = 0; i < sizeof(var8) && var8[i]; i++)
var16[i] = var8[i];
@@ -678,7 +691,8 @@ int gmin_get_config_var(struct device *dev, const char *var, char *out, size_t *
* implementation simply uses VariableName and VendorGuid from
* the struct and ignores the rest, but it seems like there
* ought to be an "official" efivar_entry registered
- * somewhere? */
+ * somewhere?
+ */
ev = kzalloc(sizeof(*ev), GFP_KERNEL);
if (!ev)
return -ENOMEM;
@@ -749,7 +763,8 @@ EXPORT_SYMBOL_GPL(camera_sensor_csi);
/* PCI quirk: The BYT ISP advertises PCI runtime PM but it doesn't
* work. Disable so the kernel framework doesn't hang the device
* trying. The driver itself does direct calls to the PUNIT to manage
- * ISP power. */
+ * ISP power.
+ */
static void isp_pm_cap_fixup(struct pci_dev *dev)
{
dev_info(&dev->dev, "Disabling PCI power management on camera ISP\n");
diff --git a/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c b/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c
index b84fe9c..28afc76 100644
--- a/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c
+++ b/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c
@@ -5,7 +5,8 @@
/* G-Min addition: "platform_is()" lives in intel_mid_pm.h in the MCG
* tree, but it's just platform ID info and we don't want to pull in
- * the whole SFI-based PM architecture. */
+ * the whole SFI-based PM architecture.
+ */
#define INTEL_ATOM_MRST 0x26
#define INTEL_ATOM_MFLD 0x27
#define INTEL_ATOM_CLV 0x35
@@ -136,8 +137,8 @@ u32 intel_mid_msgbus_read32(u8 port, u32 addr)
return data;
}
-
EXPORT_SYMBOL(intel_mid_msgbus_read32);
+
void intel_mid_msgbus_write32(u8 port, u32 addr, u32 data)
{
unsigned long irq_flags;
@@ -171,8 +172,8 @@ EXPORT_SYMBOL(intel_mid_soc_stepping);
static bool is_south_complex_device(struct pci_dev *dev)
{
- unsigned base_class = dev->class >> 16;
- unsigned sub_class = (dev->class & SUB_CLASS_MASK) >> 8;
+ unsigned int base_class = dev->class >> 16;
+ unsigned int sub_class = (dev->class & SUB_CLASS_MASK) >> 8;
/* other than camera, pci bridges and display,
* everything else are south complex devices.
--
2.7.4
