Hi Hugues,
I found a few small things that should be fixed first. It should all be
easy and quick to fix.
On 04/20/17 18:07, Hugues Fruchet wrote:
> This V4L2 subdev driver enables Digital Camera Memory Interface (DCMI)
> of STMicroelectronics STM32 SoC series.
>
> Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxx>
> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
> ---
> drivers/media/platform/Kconfig | 12 +
> drivers/media/platform/Makefile | 2 +
> drivers/media/platform/stm32/Makefile | 1 +
> drivers/media/platform/stm32/stm32-dcmi.c | 1419 +++++++++++++++++++++++++++++
> 4 files changed, 1434 insertions(+)
> create mode 100644 drivers/media/platform/stm32/Makefile
> create mode 100644 drivers/media/platform/stm32/stm32-dcmi.c
>
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> new file mode 100644
> index 0000000..0ed3bd9
> --- /dev/null
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -0,0 +1,1419 @@
...
> +static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
> +{
> + struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
> + struct dcmi_buf *buf, *node;
> + u32 val;
> + int ret;
> +
> + /* Enable stream on the sub device */
> + ret = v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 1);
> + if (ret && ret != -ENOIOCTLCMD) {
> + dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error",
> + __func__);
> + goto err_release_buffers;
> + }
> +
> + if (clk_enable(dcmi->mclk)) {
> + dev_err(dcmi->dev, "%s: Failed to start streaming, cannot enable clock",
> + __func__);
> + goto err_subdev_streamoff;
> + }
It feels more natural to me to first enable the clock, then call s_stream.
It seems what stop_streaming expects as well, since that disables the clock last,
so here you would expect to see the opposite: the clock is enabled first.
> +
> + spin_lock_irq(&dcmi->irqlock);
> +
> + val = reg_read(dcmi->regs, DCMI_CR);
> +
> + val &= ~(CR_PCKPOL | CR_HSPOL | CR_VSPOL |
> + CR_EDM_0 | CR_EDM_1 | CR_FCRC_0 |
> + CR_FCRC_1 | CR_JPEG | CR_ESS);
> +
> + /* Set bus width */
> + switch (dcmi->bus.bus_width) {
> + case 14:
> + val &= CR_EDM_0 + CR_EDM_1;
> + break;
> + case 12:
> + val &= CR_EDM_1;
> + break;
> + case 10:
> + val &= CR_EDM_0;
> + break;
> + default:
> + /* Set bus width to 8 bits by default */
> + break;
> + }
> +
> + /* Set vertical synchronization polarity */
> + if (dcmi->bus.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> + val |= CR_VSPOL;
> +
> + /* Set horizontal synchronization polarity */
> + if (dcmi->bus.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> + val |= CR_HSPOL;
> +
> + /* Set pixel clock polarity */
> + if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> + val |= CR_PCKPOL;
> +
> + reg_write(dcmi->regs, DCMI_CR, val);
> +
> + /* Enable dcmi */
> + reg_set(dcmi->regs, DCMI_CR, CR_ENABLE);
> +
> + dcmi->state = RUNNING;
> +
> + dcmi->sequence = 0;
> + dcmi->errors_count = 0;
> + dcmi->buffers_count = 0;
> + dcmi->active = NULL;
> +
> + /*
> + * Start transfer if at least one buffer has been queued,
> + * otherwise transfer is defered at buffer queueing
typo: defered -> deferred
> + */
> + if (list_empty(&dcmi->buffers)) {
> + dev_dbg(dcmi->dev, "Start streaming is defered to next buffer queueing\n");
ditto (do a search & replace)
> + spin_unlock_irq(&dcmi->irqlock);
> + return 0;
> + }
> +
> + dcmi->active = list_entry(dcmi->buffers.next, struct dcmi_buf, list);
> + list_del_init(&dcmi->active->list);
> +
> + dev_dbg(dcmi->dev, "Start streaming, starting capture\n");
> +
> + ret = dcmi_start_capture(dcmi);
> + if (ret) {
> + dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture",
> + __func__);
> +
> + spin_unlock_irq(&dcmi->irqlock);
The clock isn't disabled in this error path.
> + goto err_subdev_streamoff;
> + }
> +
> + /* Enable interruptions */
> + reg_set(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR);
> +
> + spin_unlock_irq(&dcmi->irqlock);
> +
> + return 0;
> +
> +err_subdev_streamoff:
> + v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 0);
> +
> +err_release_buffers:
> + spin_lock_irq(&dcmi->irqlock);
> + /*
> + * Return all buffers to vb2 in QUEUED state.
> + * This will give ownership back to userspace
> + */
> + if (dcmi->active) {
> + buf = dcmi->active;
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
> + dcmi->active = NULL;
> + }
> + list_for_each_entry_safe(buf, node, &dcmi->buffers, list) {
> + list_del_init(&buf->list);
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
> + }
> + spin_unlock_irq(&dcmi->irqlock);
> +
> + return ret;
> +}
> +
> +static void dcmi_stop_streaming(struct vb2_queue *vq)
> +{
> + struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
> + struct dcmi_buf *buf, *node;
> + unsigned long time_ms = msecs_to_jiffies(TIMEOUT_MS);
> + long timeout;
> + int ret;
> +
> + /* Disable stream on the sub device */
> + ret = v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 0);
> + if (ret && ret != -ENOIOCTLCMD)
> + dev_err(dcmi->dev, "stream off failed in subdev\n");
> +
> + dcmi->state = STOPPING;
> +
> + timeout = wait_for_completion_interruptible_timeout(&dcmi->complete,
> + time_ms);
> +
> + spin_lock_irq(&dcmi->irqlock);
> +
> + /* Disable interruptions */
> + reg_clear(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR);
> +
> + /* Disable DCMI */
> + reg_clear(dcmi->regs, DCMI_CR, CR_ENABLE);
> +
> + if (!timeout) {
> + dev_err(dcmi->dev, "Timeout during stop streaming\n");
> + dcmi->state = STOPPED;
> + }
> +
> + /* Return all queued buffers to vb2 in ERROR state */
> + if (dcmi->active) {
> + buf = dcmi->active;
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> + dcmi->active = NULL;
> + }
> + list_for_each_entry_safe(buf, node, &dcmi->buffers, list) {
> + list_del_init(&buf->list);
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> + }
> +
> + spin_unlock_irq(&dcmi->irqlock);
> +
> + /* Stop all pending DMA operations */
> + dmaengine_terminate_all(dcmi->dma_chan);
> +
> + clk_disable(dcmi->mclk);
> +
> + dev_dbg(dcmi->dev, "Stop streaming, errors=%d buffers=%d\n",
> + dcmi->errors_count, dcmi->buffers_count);
> +}
> +
> +static struct vb2_ops dcmi_video_qops = {
> + .queue_setup = dcmi_queue_setup,
> + .buf_init = dcmi_buf_init,
> + .buf_prepare = dcmi_buf_prepare,
> + .buf_queue = dcmi_buf_queue,
> + .start_streaming = dcmi_start_streaming,
> + .stop_streaming = dcmi_stop_streaming,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> +};
> +
> +static int dcmi_g_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *fmt)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> +
> + *fmt = dcmi->fmt;
> +
> + return 0;
> +}
> +
> +static const struct dcmi_format *find_format_by_fourcc(struct stm32_dcmi *dcmi,
> + unsigned int fourcc)
> +{
> + unsigned int num_formats = dcmi->num_user_formats;
> + const struct dcmi_format *fmt;
> + unsigned int i;
> +
> + for (i = 0; i < num_formats; i++) {
> + fmt = dcmi->user_formats[i];
> + if (fmt->fourcc == fourcc)
> + return fmt;
> + }
> +
> + return NULL;
> +}
> +
> +static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
> + const struct dcmi_format **current_fmt)
> +{
> + const struct dcmi_format *dcmi_fmt;
> + struct v4l2_pix_format *pixfmt = &f->fmt.pix;
> + struct v4l2_subdev_pad_config pad_cfg;
> + struct v4l2_subdev_format format = {
> + .which = V4L2_SUBDEV_FORMAT_TRY,
> + };
> + int ret;
> +
> + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> + return -EINVAL;
This test is not needed, the v4l2 core tests for this already.
> +
> + dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
> + if (!dcmi_fmt) {
> + dcmi_fmt = dcmi->user_formats[dcmi->num_user_formats - 1];
> + pixfmt->pixelformat = dcmi_fmt->fourcc;
> + }
> +
> + /* Limit to hardware capabilities */
> + if (pixfmt->width > MAX_SUPPORT_WIDTH)
> + pixfmt->width = MAX_SUPPORT_WIDTH;
> + if (pixfmt->height > MAX_SUPPORT_HEIGHT)
> + pixfmt->height = MAX_SUPPORT_HEIGHT;
> + if (pixfmt->width < MIN_SUPPORT_WIDTH)
> + pixfmt->width = MIN_SUPPORT_WIDTH;
> + if (pixfmt->height < MIN_SUPPORT_HEIGHT)
> + pixfmt->height = MIN_SUPPORT_HEIGHT;
I suggest using the clamp macro here.
> +
> + v4l2_fill_mbus_format(&format.format, pixfmt, dcmi_fmt->mbus_code);
> + ret = v4l2_subdev_call(dcmi->entity.subdev, pad, set_fmt,
> + &pad_cfg, &format);
> + if (ret < 0)
> + return ret;
> +
> + v4l2_fill_pix_format(pixfmt, &format.format);
> +
> + pixfmt->field = V4L2_FIELD_NONE;
> + pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
> + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
> +
> + if (current_fmt)
> + *current_fmt = dcmi_fmt;
> +
> + return 0;
> +}
> +
> +static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
> +{
> + struct v4l2_subdev_format format = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + };
> + const struct dcmi_format *current_fmt;
> + int ret;
> +
> + ret = dcmi_try_fmt(dcmi, f, ¤t_fmt);
> + if (ret)
> + return ret;
> +
> + v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
> + current_fmt->mbus_code);
> + ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
> + set_fmt, NULL, &format);
> + if (ret < 0)
> + return ret;
> +
> + dcmi->fmt = *f;
> + dcmi->current_fmt = current_fmt;
> +
> + return 0;
> +}
> +
> +static int dcmi_s_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> +
> + if (vb2_is_streaming(&dcmi->queue))
> + return -EBUSY;
> +
> + return dcmi_set_fmt(dcmi, f);
> +}
> +
> +static int dcmi_try_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> +
> + return dcmi_try_fmt(dcmi, f, NULL);
> +}
> +
> +static int dcmi_enum_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_fmtdesc *f)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> +
> + if (f->index >= dcmi->num_user_formats)
> + return -EINVAL;
> +
> + f->pixelformat = dcmi->user_formats[f->index]->fourcc;
> + return 0;
> +}
> +
> +static int dcmi_querycap(struct file *file, void *priv,
> + struct v4l2_capability *cap)
> +{
> + strlcpy(cap->driver, DRV_NAME, sizeof(cap->driver));
> + strlcpy(cap->card, "STM32 Digital Camera Memory Interface",
> + sizeof(cap->card));
I don't think this fits in cap->card.
> + strlcpy(cap->bus_info, "platform:dcmi", sizeof(cap->bus_info));
> + return 0;
> +}
> +
> +static int dcmi_enum_input(struct file *file, void *priv,
> + struct v4l2_input *i)
> +{
> + if (i->index != 0)
> + return -EINVAL;
> +
> + i->type = V4L2_INPUT_TYPE_CAMERA;
> + strlcpy(i->name, "Camera", sizeof(i->name));
> + return 0;
> +}
> +
> +static int dcmi_g_input(struct file *file, void *priv, unsigned int *i)
> +{
> + *i = 0;
> + return 0;
> +}
> +
> +static int dcmi_s_input(struct file *file, void *priv, unsigned int i)
> +{
> + if (i > 0)
> + return -EINVAL;
> + return 0;
> +}
> +
> +static int dcmi_enum_framesizes(struct file *file, void *fh,
> + struct v4l2_frmsizeenum *fsize)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> + const struct dcmi_format *dcmi_fmt;
> + struct v4l2_subdev_frame_size_enum fse = {
> + .index = fsize->index,
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + };
> + int ret;
> +
> + dcmi_fmt = find_format_by_fourcc(dcmi, fsize->pixel_format);
> + if (!dcmi_fmt)
> + return -EINVAL;
> +
> + fse.code = dcmi_fmt->mbus_code;
> +
> + ret = v4l2_subdev_call(dcmi->entity.subdev, pad, enum_frame_size,
> + NULL, &fse);
> + if (ret)
> + return ret;
> +
> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> + fsize->discrete.width = fse.max_width;
> + fsize->discrete.height = fse.max_height;
> +
> + return 0;
> +}
> +
> +static int dcmi_enum_frameintervals(struct file *file, void *fh,
> + struct v4l2_frmivalenum *fival)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> + const struct dcmi_format *dcmi_fmt;
> + struct v4l2_subdev_frame_interval_enum fie = {
> + .index = fival->index,
> + .width = fival->width,
> + .height = fival->height,
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + };
> + int ret;
> +
> + dcmi_fmt = find_format_by_fourcc(dcmi, fival->pixel_format);
> + if (!dcmi_fmt)
> + return -EINVAL;
> +
> + fie.code = dcmi_fmt->mbus_code;
> +
> + ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
> + enum_frame_interval, NULL, &fie);
> + if (ret)
> + return ret;
> +
> + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
> + fival->discrete = fie.interval;
> +
> + return 0;
> +}
> +
> +static const struct of_device_id stm32_dcmi_of_match[] = {
> + { .compatible = "st,stm32-dcmi"},
> + { /* end node */ },
> +};
> +MODULE_DEVICE_TABLE(of, stm32_dcmi_of_match);
> +
> +static int dcmi_open(struct file *file)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> + struct v4l2_subdev *sd = dcmi->entity.subdev;
> + int ret;
> +
> + if (mutex_lock_interruptible(&dcmi->lock))
> + return -ERESTARTSYS;
> +
> + ret = v4l2_fh_open(file);
> + if (ret < 0)
> + goto unlock;
> +
> + if (!v4l2_fh_is_singular_file(file))
> + goto fh_rel;
> +
> + ret = v4l2_subdev_call(sd, core, s_power, 1);
> + if (ret < 0 && ret != -ENOIOCTLCMD)
> + goto fh_rel;
> +
> + ret = dcmi_set_fmt(dcmi, &dcmi->fmt);
> + if (ret)
> + v4l2_subdev_call(sd, core, s_power, 0);
> +fh_rel:
> + if (ret)
> + v4l2_fh_release(file);
> +unlock:
> + mutex_unlock(&dcmi->lock);
> + return ret;
> +}
> +
> +static int dcmi_release(struct file *file)
> +{
> + struct stm32_dcmi *dcmi = video_drvdata(file);
> + struct v4l2_subdev *sd = dcmi->entity.subdev;
> + bool fh_singular;
> + int ret;
> +
> + mutex_lock(&dcmi->lock);
> +
> + fh_singular = v4l2_fh_is_singular_file(file);
> +
> + ret = _vb2_fop_release(file, NULL);
> +
> + if (fh_singular)
> + v4l2_subdev_call(sd, core, s_power, 0);
> +
> + mutex_unlock(&dcmi->lock);
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ioctl_ops dcmi_ioctl_ops = {
> + .vidioc_querycap = dcmi_querycap,
> +
> + .vidioc_try_fmt_vid_cap = dcmi_try_fmt_vid_cap,
> + .vidioc_g_fmt_vid_cap = dcmi_g_fmt_vid_cap,
> + .vidioc_s_fmt_vid_cap = dcmi_s_fmt_vid_cap,
> + .vidioc_enum_fmt_vid_cap = dcmi_enum_fmt_vid_cap,
> +
> + .vidioc_enum_input = dcmi_enum_input,
> + .vidioc_g_input = dcmi_g_input,
> + .vidioc_s_input = dcmi_s_input,
> +
> + .vidioc_enum_framesizes = dcmi_enum_framesizes,
> + .vidioc_enum_frameintervals = dcmi_enum_frameintervals,
> +
> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_expbuf = vb2_ioctl_expbuf,
> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> +
> + .vidioc_log_status = v4l2_ctrl_log_status,
> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +static const struct v4l2_file_operations dcmi_fops = {
> + .owner = THIS_MODULE,
> + .unlocked_ioctl = video_ioctl2,
> + .open = dcmi_open,
> + .release = dcmi_release,
> + .poll = vb2_fop_poll,
> + .mmap = vb2_fop_mmap,
> +#ifndef CONFIG_MMU
> + .get_unmapped_area = vb2_fop_get_unmapped_area,
> +#endif
> + .read = vb2_fop_read,
> +};
> +
> +static int dcmi_set_default_fmt(struct stm32_dcmi *dcmi)
> +{
> + struct v4l2_format f = {
> + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
> + .fmt.pix = {
> + .width = CIF_WIDTH,
> + .height = CIF_HEIGHT,
> + .field = V4L2_FIELD_NONE,
> + .pixelformat = dcmi->user_formats[0]->fourcc,
> + },
> + };
> + int ret;
> +
> + ret = dcmi_try_fmt(dcmi, &f, NULL);
> + if (ret)
> + return ret;
> + dcmi->current_fmt = dcmi->user_formats[0];
> + dcmi->fmt = f;
> + return 0;
> +}
> +
> +static const struct dcmi_format dcmi_formats[] = {
> + {
> + .fourcc = V4L2_PIX_FMT_RGB565,
> + .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE,
> + .bpp = 2,
> + }, {
> + .fourcc = V4L2_PIX_FMT_YUYV,
> + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
> + .bpp = 2,
> + }, {
> + .fourcc = V4L2_PIX_FMT_UYVY,
> + .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8,
> + .bpp = 2,
> + },
> +};
> +
> +static int dcmi_formats_init(struct stm32_dcmi *dcmi)
> +{
> + const struct dcmi_format *dcmi_fmts[ARRAY_SIZE(dcmi_formats)];
> + unsigned int num_fmts = 0, i, j;
> + struct v4l2_subdev *subdev = dcmi->entity.subdev;
> + struct v4l2_subdev_mbus_code_enum mbus_code = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + };
> +
> + while (!v4l2_subdev_call(subdev, pad, enum_mbus_code,
> + NULL, &mbus_code)) {
> + for (i = 0; i < ARRAY_SIZE(dcmi_formats); i++) {
> + if (dcmi_formats[i].mbus_code != mbus_code.code)
> + continue;
> +
> + /* Code supported, have we got this fourcc yet? */
> + for (j = 0; j < num_fmts; j++)
> + if (dcmi_fmts[j]->fourcc ==
> + dcmi_formats[i].fourcc)
> + /* Already available */
> + break;
> + if (j == num_fmts)
> + /* New */
> + dcmi_fmts[num_fmts++] = dcmi_formats + i;
> + }
> + mbus_code.index++;
> + }
> +
> + if (!num_fmts)
> + return -ENXIO;
> +
> + dcmi->num_user_formats = num_fmts;
> + dcmi->user_formats = devm_kcalloc(dcmi->dev,
> + num_fmts, sizeof(struct dcmi_format *),
> + GFP_KERNEL);
> + if (!dcmi->user_formats) {
> + dev_err(dcmi->dev, "could not allocate memory\n");
> + return -ENOMEM;
> + }
> +
> + memcpy(dcmi->user_formats, dcmi_fmts,
> + num_fmts * sizeof(struct dcmi_format *));
> + dcmi->current_fmt = dcmi->user_formats[0];
> +
> + return 0;
> +}
> +
> +static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
> +{
> + struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
> + int ret;
> +
> + dcmi->vdev->ctrl_handler = dcmi->entity.subdev->ctrl_handler;
Replace the tab before the '=' by a simple space.
> + ret = dcmi_formats_init(dcmi);
> + if (ret) {
> + dev_err(dcmi->dev, "No supported mediabus format found\n");
> + return ret;
> + }
> +
> + ret = dcmi_set_default_fmt(dcmi);
> + if (ret) {
> + dev_err(dcmi->dev, "Could not set default format\n");
> + return ret;
> + }
> +
> + ret = video_register_device(dcmi->vdev, VFL_TYPE_GRABBER, -1);
> + if (ret) {
> + dev_err(dcmi->dev, "Failed to register video device\n");
> + return ret;
> + }
> +
> + dev_dbg(dcmi->dev, "Device registered as %s\n",
> + video_device_node_name(dcmi->vdev));
> + return 0;
> +}
> +
> +static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *sd,
> + struct v4l2_async_subdev *asd)
> +{
> + struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
> +
> + dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev));
> +
> + /* Checks internaly if vdev has been init or not */
> + video_unregister_device(dcmi->vdev);
> +}
> +
> +static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *subdev,
> + struct v4l2_async_subdev *asd)
> +{
> + struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
> +
> + dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name);
> +
> + dcmi->entity.subdev = subdev;
> +
> + return 0;
> +}
> +
> +static int dcmi_graph_parse(struct stm32_dcmi *dcmi, struct device_node *node)
> +{
> + struct device_node *ep = NULL;
> + struct device_node *remote;
> +
> + while (1) {
> + ep = of_graph_get_next_endpoint(node, ep);
> + if (!ep)
> + return -EINVAL;
> +
> + remote = of_graph_get_remote_port_parent(ep);
> + if (!remote) {
> + of_node_put(ep);
> + return -EINVAL;
> + }
> +
> + /* Remote node to connect */
> + dcmi->entity.node = remote;
> + dcmi->entity.asd.match_type = V4L2_ASYNC_MATCH_OF;
> + dcmi->entity.asd.match.of.node = remote;
> + return 0;
> + }
> +}
> +
> +static int dcmi_graph_init(struct stm32_dcmi *dcmi)
> +{
> + struct v4l2_async_subdev **subdevs = NULL;
> + int ret;
> +
> + /* Parse the graph to extract a list of subdevice DT nodes. */
> + ret = dcmi_graph_parse(dcmi, dcmi->dev->of_node);
> + if (ret < 0) {
> + dev_err(dcmi->dev, "Graph parsing failed\n");
> + return ret;
> + }
> +
> + /* Register the subdevices notifier. */
> + subdevs = devm_kzalloc(dcmi->dev, sizeof(*subdevs), GFP_KERNEL);
> + if (!subdevs) {
> + of_node_put(dcmi->entity.node);
> + return -ENOMEM;
> + }
> +
> + subdevs[0] = &dcmi->entity.asd;
> +
> + dcmi->notifier.subdevs = subdevs;
> + dcmi->notifier.num_subdevs = 1;
> + dcmi->notifier.bound = dcmi_graph_notify_bound;
> + dcmi->notifier.unbind = dcmi_graph_notify_unbind;
> + dcmi->notifier.complete = dcmi_graph_notify_complete;
> +
> + ret = v4l2_async_notifier_register(&dcmi->v4l2_dev, &dcmi->notifier);
> + if (ret < 0) {
> + dev_err(dcmi->dev, "Notifier registration failed\n");
> + of_node_put(dcmi->entity.node);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int dcmi_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + const struct of_device_id *match = NULL;
> + struct v4l2_of_endpoint ep;
> + struct stm32_dcmi *dcmi;
> + struct vb2_queue *q;
> + struct dma_chan *chan;
> + struct clk *mclk;
> + int irq;
> + int ret = 0;
> +
> + match = of_match_device(of_match_ptr(stm32_dcmi_of_match), &pdev->dev);
> + if (!match) {
> + dev_err(&pdev->dev, "Could not find a match in devicetree\n");
> + return -ENODEV;
> + }
> +
> + dcmi = devm_kzalloc(&pdev->dev, sizeof(struct stm32_dcmi), GFP_KERNEL);
> + if (!dcmi)
> + return -ENOMEM;
> +
> + dcmi->rstc = of_reset_control_get(np, NULL);
> + if (IS_ERR(dcmi->rstc)) {
> + dev_err(&pdev->dev, "Could not get reset control\n");
> + return -ENODEV;
> + }
> +
> + /* Get bus characteristics from devicetree */
> + np = of_graph_get_next_endpoint(np, NULL);
> + if (!np) {
> + dev_err(&pdev->dev, "Could not find the endpoint\n");
> + of_node_put(np);
> + goto err_reset_control_put;
> + }
> +
> + ret = v4l2_of_parse_endpoint(np, &ep);
> + if (ret) {
> + dev_err(&pdev->dev, "Could not parse the endpoint\n");
> + of_node_put(np);
> + goto err_reset_control_put;
> + }
> +
> + if (ep.bus_type == V4L2_MBUS_CSI2) {
> + dev_err(&pdev->dev, "CSI bus not supported\n");
> + of_node_put(np);
> + goto err_reset_control_put;
> + }
> + dcmi->bus.flags = ep.bus.parallel.flags;
> + dcmi->bus.bus_width = ep.bus.parallel.bus_width;
> + dcmi->bus.data_shift = ep.bus.parallel.data_shift;
> +
> + of_node_put(np);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq <= 0) {
> + dev_err(&pdev->dev, "Could not get irq\n");
> + return -ENODEV;
> + }
> +
> + dcmi->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!dcmi->res) {
> + dev_err(&pdev->dev, "Could not get resource\n");
> + return -ENODEV;
> + }
> +
> + dcmi->regs = devm_ioremap_resource(&pdev->dev, dcmi->res);
> + if (IS_ERR(dcmi->regs)) {
> + dev_err(&pdev->dev, "Could not map registers\n");
> + return PTR_ERR(dcmi->regs);
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, irq, dcmi_irq_callback,
> + dcmi_irq_thread, IRQF_ONESHOT,
> + dev_name(&pdev->dev), dcmi);
> + if (ret) {
> + dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
> + return -ENODEV;
> + }
> +
> + mclk = devm_clk_get(&pdev->dev, "mclk");
> + if (IS_ERR(mclk)) {
> + dev_err(&pdev->dev, "Unable to get mclk\n");
> + return PTR_ERR(mclk);
> + }
> +
> + chan = dma_request_slave_channel(&pdev->dev, "tx");
> + if (!chan) {
> + dev_info(&pdev->dev, "Unable to request DMA channel, defer probing\n");
> + return -EPROBE_DEFER;
> + }
> +
> + ret = clk_prepare(mclk);
> + if (ret) {
> + dev_err(&pdev->dev, "Unable to prepare mclk %p\n", mclk);
> + goto err_dma_release;
> + }
> +
> + spin_lock_init(&dcmi->irqlock);
> + mutex_init(&dcmi->lock);
> + init_completion(&dcmi->complete);
> + INIT_LIST_HEAD(&dcmi->buffers);
> +
> + dcmi->dev = &pdev->dev;
> + dcmi->mclk = mclk;
> + dcmi->state = STOPPED;
> + dcmi->dma_chan = chan;
> +
> + q = &dcmi->queue;
> +
> + /* Initialize the top-level structure */
> + ret = v4l2_device_register(&pdev->dev, &dcmi->v4l2_dev);
> + if (ret)
> + goto err_clk_unprepare;
> +
> + dcmi->vdev = video_device_alloc();
> + if (!dcmi->vdev) {
> + ret = -ENOMEM;
> + goto err_device_unregister;
> + }
> +
> + /* Video node */
> + dcmi->vdev->fops = &dcmi_fops;
> + dcmi->vdev->v4l2_dev = &dcmi->v4l2_dev;
> + dcmi->vdev->queue = &dcmi->queue;
> + strlcpy(dcmi->vdev->name, KBUILD_MODNAME, sizeof(dcmi->vdev->name));
> + dcmi->vdev->release = video_device_release;
> + dcmi->vdev->ioctl_ops = &dcmi_ioctl_ops;
> + dcmi->vdev->lock = &dcmi->lock;
> + dcmi->vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> + V4L2_CAP_READWRITE;
> + video_set_drvdata(dcmi->vdev, dcmi);
> +
> + /* Buffer queue */
> + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
> + q->lock = &dcmi->lock;
> + q->drv_priv = dcmi;
> + q->buf_struct_size = sizeof(struct dcmi_buf);
> + q->ops = &dcmi_video_qops;
> + q->mem_ops = &vb2_dma_contig_memops;
> + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + q->min_buffers_needed = 2;
> + q->dev = &pdev->dev;
> +
> + ret = vb2_queue_init(q);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to initialize vb2 queue\n");
> + goto err_device_release;
> + }
> +
> + ret = dcmi_graph_init(dcmi);
> + if (ret < 0)
> + goto err_device_release;
> +
> + /* Reset device */
> + ret = reset_control_assert(dcmi->rstc);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to assert the reset line\n");
> + goto err_device_release;
> + }
> +
> + usleep_range(3000, 5000);
> +
> + ret = reset_control_deassert(dcmi->rstc);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to deassert the reset line\n");
> + goto err_device_release;
> + }
> +
> + dev_info(&pdev->dev, "Probe done\n");
> +
> + platform_set_drvdata(pdev, dcmi);
> + return 0;
> +
> +err_reset_control_put:
> + reset_control_put(dcmi->rstc);
> +err_device_release:
> + video_device_release(dcmi->vdev);
> +err_device_unregister:
> + v4l2_device_unregister(&dcmi->v4l2_dev);
> +err_clk_unprepare:
> + clk_unprepare(dcmi->mclk);
> +err_dma_release:
> + dma_release_channel(dcmi->dma_chan);
> +
> + return ret;
> +}
> +
> +static int dcmi_remove(struct platform_device *pdev)
> +{
> + struct stm32_dcmi *dcmi = platform_get_drvdata(pdev);
> +
> + v4l2_async_notifier_unregister(&dcmi->notifier);
> + v4l2_device_unregister(&dcmi->v4l2_dev);
> + clk_unprepare(dcmi->mclk);
> + dma_release_channel(dcmi->dma_chan);
> + reset_control_put(dcmi->rstc);
> +
> + return 0;
> +}
> +
> +static struct platform_driver stm32_dcmi_driver = {
> + .probe = dcmi_probe,
> + .remove = dcmi_remove,
> + .driver = {
> + .name = DRV_NAME,
> + .of_match_table = of_match_ptr(stm32_dcmi_of_match),
> + },
> +};
> +
> +module_platform_driver(stm32_dcmi_driver);
> +
> +MODULE_AUTHOR("Yannick Fertre <yannick.fertre@xxxxxx>");
> +MODULE_AUTHOR("Hugues Fruchet <hugues.fruchet@xxxxxx>");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 Digital Camera Memory Interface driver");
> +MODULE_LICENSE("GPL");
> +MODULE_SUPPORTED_DEVICE("video");
>
Regards,
Hans
