Re: [PATCH] Multifrontend support for saa7134

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lukas, Petr and Eddi,

thanks for working on it.

Am Samstag, den 31.10.2009, 21:21 +0100 schrieb Lukáš Karas:
> Hi all, 
> here is patch for multifrontend support in saa7134 driver. It is derived from 
> patches on page http://tux.dpeddi.com/lr319sta/
> 
> This patch has effect on these cards:
>  * FlyDVB Trio
>  * Medion MD8800 Quadro
>  * ASUSTeK Tiger 3in1

The a little bit hidden low profile triple CTX948 is also involved, just
to have it mentioned. We treat it like the Medion MD8800 Quadro, CTX944,
with subsystem 16be:0007.

> It was tested with FlyDVB Trio card.
> If you could, please test it with other cards too.

Some first tests on the CTX944 don't look such promising yet.
On DVB-T only one transponder remains and even that one is heavily
disturbed.

On DVB-S only about one third of the previous services is still
available. Lots of such.

saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0) returns 0
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1)
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1) returns 0
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
tda10086_diseqc_wait: diseqc queue not ready, command may be lost.
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0)
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0) returns 0
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1)
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=1) returns 0
saa7133[1]/dvb: saa7134_dvb_bus_ctrl(acquire=0)

I do have the Asus Tiger 3in1 and the triple CTX948 too, but can't
promise when I get time to test on those less complicated devices.

Cheers,
Hermann

> Regards, 
> Lukas
> 
> 
> Signed-off-by: Lukas Karas <lukas.karas@xxxxxxxxxx>
> Tested-by: Petr Fiala <petr.fiala@xxxxxxxxx>
> diff -uprN ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-cards.c ./linux/drivers/media/video/saa7134/saa7134-
> cards.c
> --- ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-cards.c	2009-10-31 10:40:46.000000000 +0100
> +++ ./linux/drivers/media/video/saa7134/saa7134-cards.c	2009-10-31 17:47:51.000000000 +0100
> @@ -614,6 +614,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 1,
> @@ -1352,6 +1353,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		 .mpeg           = SAA7134_MPEG_DVB,
> +		 .num_frontends  = 1,
>  		 .inputs         = {{
>  			 .name = name_tv,
>  			 .vmux = 1,
> @@ -1895,6 +1897,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 3,
> @@ -1987,6 +1990,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.gpiomask	= 0x00200000,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -2020,6 +2024,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_comp1,
>  			.vmux   = 0,
> @@ -2126,6 +2131,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask	= 0x00200000,
>  		.inputs         = {{
>  			.name = name_tv,
> @@ -2426,6 +2432,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 3,
> @@ -2450,6 +2457,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 3,
> @@ -2473,6 +2481,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_comp1,
>  			.vmux   = 0,
> @@ -2596,6 +2605,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_comp1,
>  			.vmux = 3,
> @@ -2670,6 +2680,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.gpiomask	= 1 << 21,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -2761,6 +2772,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tuner_config   = 0,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x0200000,
>  		.inputs = {{
>  			.name   = name_tv,
> @@ -2853,6 +2865,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.gpiomask	= 0x00200000,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 2,
>  		.inputs         = {{
>  			.name = name_tv,	/* Analog broadcast/cable TV */
>  			.vmux = 1,
> @@ -2886,6 +2899,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_comp1,
>  			.vmux   = 1,
> @@ -2906,6 +2920,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_comp1,	/* Composite input */
>  			.vmux = 3,
> @@ -2924,6 +2939,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */
>  		.inputs = {{
>  			.name   = name_tv,
> @@ -2941,6 +2957,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 1 << 21,
>  		.inputs = {{
>  			.name   = name_tv,
> @@ -2974,6 +2991,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 1 << 21,
>  		.inputs = {{
>  			.name   = name_tv,
> @@ -3004,6 +3022,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -3107,6 +3126,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1
>  	},
>  	[SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS] = {
>  		.name		= "LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB",
> @@ -3116,6 +3136,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */
>  		.inputs         = {{
>  			.name = name_tv,
> @@ -3199,6 +3220,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 2,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 1,
> @@ -3224,6 +3246,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_comp1,	/* Composite input */
>  			.vmux = 3,
> @@ -3275,6 +3298,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = 0x60,
>  		.tda9887_conf   = TDA9887_PRESENT,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -3303,6 +3327,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT| TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 3,
> @@ -3331,6 +3356,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tuner_config   = 1,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x000200000,
>  		.inputs         = {{
>  			.name = name_tv,
> @@ -3409,6 +3435,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 3,
> @@ -3435,6 +3462,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tuner_config   = 1,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x0200100,
>  		.inputs         = {{
>  			.name = name_tv,
> @@ -3466,6 +3494,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tuner_config   = 3,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.ts_type	= SAA7134_MPEG_TS_SERIAL,
>  		.gpiomask       = 0x0800100, /* GPIO 21 is an INPUT */
>  		.inputs         = {{
> @@ -3498,6 +3527,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tuner_config   = 3,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.ts_type	= SAA7134_MPEG_TS_SERIAL,
>  		.gpiomask       = 0x0800100, /* GPIO 21 is an INPUT */
>  		.inputs         = {{
> @@ -3529,6 +3559,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 1,
> @@ -3666,6 +3697,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv,
>  			.vmux   = 1,
> @@ -3690,6 +3722,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tuner_config   = 2,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x0200000,
>  		.inputs = {{
>  			.name   = name_tv,
> @@ -3743,6 +3776,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tuner_config   = 2,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x0200000,
>  		.inputs = {{
>  			.name   = name_tv,
> @@ -3762,6 +3796,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_config   = 2,
>  		.gpiomask	= 1 << 21,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -3894,6 +3929,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tuner_config   = 0,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_tv, /* FIXME: analog tv untested */
>  			.vmux   = 1,
> @@ -4777,6 +4813,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = {{
>  			.name   = name_comp1,
>  			.vmux   = 3,
> @@ -4796,6 +4833,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr   = ADDR_UNSET,
>  		.tuner_config = 0,
>  		.mpeg         = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs       = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -4820,6 +4858,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tuner_config   = 2,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x0200000,
>  		.inputs = { {
>  			.name   = name_tv,
> @@ -4849,6 +4888,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		 .mpeg           = SAA7134_MPEG_DVB,
> +		 .num_frontends  = 1,
>  		 .inputs         = {{
>  			 .name = name_tv,
>  			 .vmux = 1,
> @@ -4876,6 +4916,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -4953,6 +4994,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = { {
>  			.name = name_comp,
>  			.vmux = 1,
> @@ -4972,6 +5014,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = { {
>  			.name   = name_tv,
>  			.vmux   = 4,
> @@ -5001,6 +5044,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 3,
> @@ -5030,6 +5074,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_config   = 2,
>  		.gpiomask       = 1 << 21,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 2,
>  		.inputs         = {{
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -5094,6 +5139,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = { {
>  			.name = name_tv,
>  			.vmux = 1,
> @@ -5118,6 +5164,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tuner_config   = 0,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.gpiomask       = 0x0200000,
>  		.inputs = { {
>  			.name   = name_tv,
> @@ -5259,6 +5306,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr	= ADDR_UNSET,
>  		.radio_addr	= ADDR_UNSET,
>  		.mpeg		= SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = { {
>  			.name	= name_comp1,
>  			.vmux	= 0,
> @@ -5278,6 +5326,7 @@ struct saa7134_board saa7134_boards[] =
>  		.tuner_addr     = ADDR_UNSET,
>  		.radio_addr     = ADDR_UNSET,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs         = { {
>  			.name = name_tv,
>  			.vmux = 2,
> @@ -5306,6 +5355,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr     = ADDR_UNSET,
>  		.tuner_config   = 0,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.ts_type	= SAA7134_MPEG_TS_PARALLEL,
>  		.inputs         = {{
>  			.name = name_tv,
> @@ -5327,6 +5377,7 @@ struct saa7134_board saa7134_boards[] =
>  		.radio_addr	= ADDR_UNSET,
>  		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
>  		.mpeg           = SAA7134_MPEG_DVB,
> +		.num_frontends  = 1,
>  		.inputs = { {
>  			.name   = name_tv,
>  			.vmux   = 3,
> diff -uprN ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-dvb.c ./linux/drivers/media/video/saa7134/saa7134-
> dvb.c
> --- ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134-dvb.c	2009-10-31 10:40:46.000000000 +0100
> +++ ./linux/drivers/media/video/saa7134/saa7134-dvb.c	2009-10-31 20:51:59.000000000 +0100
> @@ -68,10 +68,6 @@ static unsigned int antenna_pwr;
>  module_param(antenna_pwr, int, 0444);
>  MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
> 
> -static int use_frontend;
> -module_param(use_frontend, int, 0644);
> -MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
> -
>  static int debug;
>  module_param(debug, int, 0644);
>  MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
> @@ -543,19 +539,15 @@ static int philips_tda827x_tuner_sleep(s
>  }
> 
>  static int configure_tda827x_fe(struct saa7134_dev *dev,
> +				struct videobuf_dvb_frontend *fe,
>  				struct tda1004x_config *cdec_conf,
>  				struct tda827x_config *tuner_conf)
>  {
> -	struct videobuf_dvb_frontend *fe0;
> -
> -	/* Get the first frontend */
> -	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
> -
> -	fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
> -	if (fe0->dvb.frontend) {
> +	fe->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
> +	if (fe->dvb.frontend) {
>  		if (cdec_conf->i2c_gate)
> -			fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
> -		if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
> +			fe->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
> +		if (dvb_attach(tda827x_attach, fe->dvb.frontend,
>  			       cdec_conf->tuner_address,
>  			       &dev->i2c_adap, tuner_conf))
>  			return 0;
> @@ -1075,193 +1067,246 @@ static struct tda18271_config dtv1000s_t
>   * Core code
>   */
> 
> +static int saa7134_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire)
> +{
> +	struct saa7134_dev *dev = fe->dvb->priv;
> +	int ret = 0;
> +	int fe_id;
> +
> +	dprintk("%s(acquire=%d)\n", __func__, acquire);
> +
> +	fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe);
> +	if (!fe_id) {
> +		printk(KERN_ERR "%s() No frontend found\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	if(acquire) {
> +		if (dev->frontends.active_fe_id != 0)
> +			return -EBUSY;
> +		else
> +			dev->frontends.active_fe_id = fe_id;
> +
> +		if (dev->frontends.active_fe_id == 1) {
> +			/* try to reset the hardware (SWRST) */
> +			saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
> +			msleep(10);
> +			saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
> +			udelay(1000);
> +		}
> +		if (dev->frontends.active_fe_id == 2) {
> +			/* try to reset the hardware (SWRST) */
> +			saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
> +			msleep(10);
> +			saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
> +			udelay(1000);
> +		}
> +	} else {
> +		dev->frontends.active_fe_id = 0;
> +	}
> +
> +	dprintk("%s(acquire=%d) returns %d\n", __func__, acquire, ret);
> +	return ret;
> +}
> +
>  static int dvb_init(struct saa7134_dev *dev)
>  {
> -	int ret;
> +	int ret, i;
>  	int attach_xc3028 = 0;
> -	struct videobuf_dvb_frontend *fe0;
> +	struct videobuf_dvb_frontend *last_fe = NULL;
> +	struct videobuf_dvb_frontend *fe;
> 
> -	/* FIXME: add support for multi-frontend */
>  	mutex_init(&dev->frontends.lock);
>  	INIT_LIST_HEAD(&dev->frontends.felist);
> 
> -	printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
> -	fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1);
> -	if (!fe0) {
> -		printk(KERN_ERR "%s() failed to alloc\n", __func__);
> -		return -ENOMEM;
> +	if (!saa7134_boards[dev->board].num_frontends) {
> +		printk(KERN_ERR "%s() .num_frontends should be non-zero\n", __func__);
> +		return -ENODEV;
>  	}
> -
> +
>  	/* init struct videobuf_dvb */
>  	dev->ts.nr_bufs    = 32;
>  	dev->ts.nr_packets = 32*4;
> -	fe0->dvb.name = dev->name;
> -	videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops,
> -			    &dev->pci->dev, &dev->slock,
> -			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
> -			    V4L2_FIELD_ALTERNATE,
> -			    sizeof(struct saa7134_buf),
> -			    dev);
> 
> +	/* init frontends */
> +	printk(KERN_ERR "%s() allocating %d frontends\n", __func__, saa7134_boards[dev->board].num_frontends);
> +	for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +		last_fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
> +		if(last_fe == NULL) {
> +			printk(KERN_ERR "%s() failed to alloc\n", __func__);
> +			goto dettach_frontend;
> +		}
> +		last_fe->dvb.name = dev->name;
> +		videobuf_queue_sg_init(&last_fe->dvb.dvbq, &saa7134_ts_qops,
> +								&dev->pci->dev, &dev->slock,
> +								V4L2_BUF_TYPE_VIDEO_CAPTURE,
> +								V4L2_FIELD_ALTERNATE,
> +								sizeof(struct saa7134_buf),
> +								dev);
> +	}
> +
>  	switch (dev->board) {
>  	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
>  		dprintk("pinnacle 300i dvb setup\n");
> -		fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
> +		last_fe->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
> +		if (last_fe->dvb.frontend) {
> +			last_fe->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
>  		}
>  		break;
>  	case SAA7134_BOARD_AVERMEDIA_777:
>  	case SAA7134_BOARD_AVERMEDIA_A16AR:
>  		dprintk("avertv 777 dvb setup\n");
> -		fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
> +		last_fe->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend) {
> +			dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, 0x61,
>  				   TUNER_PHILIPS_TD1316);
>  		}
>  		break;
>  	case SAA7134_BOARD_AVERMEDIA_A16D:
>  		dprintk("AverMedia A16D dvb setup\n");
> -		fe0->dvb.frontend = dvb_attach(mt352_attach,
> +		last_fe->dvb.frontend = dvb_attach(mt352_attach,
>  						&avermedia_xc3028_mt352_dev,
>  						&dev->i2c_adap);
>  		attach_xc3028 = 1;
>  		break;
>  	case SAA7134_BOARD_MD7134:
> -		fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>  					       &medion_cardbus,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend) {
> +			dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, medion_cardbus.tuner_address,
>  				   TUNER_PHILIPS_FMD1216ME_MK3);
>  		}
>  		break;
>  	case SAA7134_BOARD_PHILIPS_TOUGH:
> -		fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>  					       &philips_tu1216_60_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
> -			fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
> +		if (last_fe->dvb.frontend) {
> +			last_fe->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
> +			last_fe->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
>  		}
>  		break;
>  	case SAA7134_BOARD_FLYDVBTDUO:
>  	case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
> -		if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
> +		if (configure_tda827x_fe(dev, last_fe, &tda827x_lifeview_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_PHILIPS_EUROPA:
>  	case SAA7134_BOARD_VIDEOMATE_DVBT_300:
>  	case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
> -		fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>  					       &philips_europa_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
> -			fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
> -			fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
> -			fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
> -			fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
> +		if (last_fe->dvb.frontend) {
> +			dev->original_demod_sleep = last_fe->dvb.frontend->ops.sleep;
> +			last_fe->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
> +			last_fe->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
> +			last_fe->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
> +			last_fe->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
>  		}
>  		break;
>  	case SAA7134_BOARD_VIDEOMATE_DVBT_200:
> -		fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>  					       &philips_tu1216_61_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
> -			fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
> +		if (last_fe->dvb.frontend) {
> +			last_fe->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
> +			last_fe->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
>  		}
>  		break;
>  	case SAA7134_BOARD_KWORLD_DVBT_210:
> -		if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
> +		if (configure_tda827x_fe(dev, last_fe, &kworld_dvb_t_210_config,
>  					 &tda827x_cfg_2) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
> -		fe0->dvb.frontend = dvb_attach(tda10048_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10048_attach,
>  					       &hcw_tda10048_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend != NULL) {
> -			dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend != NULL) {
> +			dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, 0x4b,
>  				   &tda829x_no_probe);
> -			dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +			dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>  				   0x60, &dev->i2c_adap,
>  				   &hcw_tda18271_config);
>  		}
>  		break;
>  	case SAA7134_BOARD_PHILIPS_TIGER:
> -		if (configure_tda827x_fe(dev, &philips_tiger_config,
> +		if (configure_tda827x_fe(dev, last_fe, &philips_tiger_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_PINNACLE_PCTV_310i:
> -		if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
> +		if (configure_tda827x_fe(dev, last_fe, &pinnacle_pctv_310i_config,
>  					 &tda827x_cfg_1) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_HAUPPAUGE_HVR1110:
> -		if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
> +		if (configure_tda827x_fe(dev, last_fe, &hauppauge_hvr_1110_config,
>  					 &tda827x_cfg_1) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
> -		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
> +		last_fe->dvb.frontend = dvb_attach(lgdt3305_attach,
>  					       &hcw_lgdt3305_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend) {
> +			dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, 0x4b,
>  				   &tda829x_no_probe);
> -			dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +			dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>  				   0x60, &dev->i2c_adap,
>  				   &hcw_tda18271_config);
>  		}
>  		break;
>  	case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
> -		if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
> +		if (configure_tda827x_fe(dev, last_fe, &asus_p7131_dual_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_FLYDVBT_LR301:
> -		if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
> +		if (configure_tda827x_fe(dev, last_fe, &tda827x_lifeview_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_FLYDVB_TRIO:
> -		if (!use_frontend) {	/* terrestrial */
> -			if (configure_tda827x_fe(dev, &lifeview_trio_config,
> -						 &tda827x_cfg_0) < 0)
> +		/* terrestrial */
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, 1);
> +		if (configure_tda827x_fe(dev, fe, &lifeview_trio_config,
> +						&tda827x_cfg_0) < 0)
> +			goto dettach_frontend;
> +
> +		/* satellite */
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, 2);
> +		fe->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
> +		if (fe->dvb.frontend) {
> +			fe->dvb.frontend->id = 1;
> +			if (dvb_attach(tda826x_attach, fe->dvb.frontend, 0x63,
> +								&dev->i2c_adap, 0) == NULL) {
> +				wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
> +				goto dettach_frontend;
> +			}
> +			if (dvb_attach(isl6421_attach, fe->dvb.frontend, &dev->i2c_adap,
> +									0x08, 0, 0) == NULL) {
> +				wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
>  				goto dettach_frontend;
> -		} else {  		/* satellite */
> -			fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
> -			if (fe0->dvb.frontend) {
> -				if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
> -									&dev->i2c_adap, 0) == NULL) {
> -					wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
> -					goto dettach_frontend;
> -				}
> -				if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap,
> -										0x08, 0, 0) == NULL) {
> -					wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
> -					goto dettach_frontend;
> -				}
>  			}
>  		}
>  		break;
>  	case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
>  	case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
> -		fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>  					       &ads_tech_duo_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend) {
> +			if (dvb_attach(tda827x_attach,last_fe->dvb.frontend,
>  				   ads_tech_duo_config.tuner_address, &dev->i2c_adap,
>  								&ads_duo_cfg) == NULL) {
>  				wprintk("no tda827x tuner found at addr: %02x\n",
> @@ -1272,83 +1317,86 @@ static int dvb_init(struct saa7134_dev *
>  			wprintk("failed to attach tda10046\n");
>  		break;
>  	case SAA7134_BOARD_TEVION_DVBT_220RF:
> -		if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
> +		if (configure_tda827x_fe(dev, last_fe, &tevion_dvbt220rf_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_MEDION_MD8800_QUADRO:
> -		if (!use_frontend) {     /* terrestrial */
> -			if (configure_tda827x_fe(dev, &md8800_dvbt_config,
> -						 &tda827x_cfg_0) < 0)
> +		/* terrestrial */
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, 1);
> +		if (configure_tda827x_fe(dev, fe, &md8800_dvbt_config,
> +						&tda827x_cfg_0) < 0)
> +			goto dettach_frontend;
> +
> +		/* satellite */
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, 2);
> +		fe->dvb.frontend = dvb_attach(tda10086_attach,
> +						&flydvbs, &dev->i2c_adap);
> +		if (fe->dvb.frontend) {
> +			struct dvb_frontend *dvb_fe = fe->dvb.frontend;
> +			u8 dev_id = dev->eedata[2];
> +			u8 data = 0xc4;
> +			struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
> +			fe->dvb.frontend->id = 1;
> +
> +			if (dvb_attach(tda826x_attach, dvb_fe,
> +					0x60, &dev->i2c_adap, 0) == NULL) {
> +				wprintk("%s: Medion Quadro, no tda826x "
> +					"found !\n", __func__);
>  				goto dettach_frontend;
> -		} else {        /* satellite */
> -			fe0->dvb.frontend = dvb_attach(tda10086_attach,
> -							&flydvbs, &dev->i2c_adap);
> -			if (fe0->dvb.frontend) {
> -				struct dvb_frontend *fe = fe0->dvb.frontend;
> -				u8 dev_id = dev->eedata[2];
> -				u8 data = 0xc4;
> -				struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
> -
> -				if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
> -						0x60, &dev->i2c_adap, 0) == NULL) {
> -					wprintk("%s: Medion Quadro, no tda826x "
> +			}
> +			if (dev_id != 0x08) {
> +				/* we need to open the i2c gate (we know it exists) */
> +				dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 1);
> +				if (dvb_attach(isl6405_attach, dvb_fe,
> +						&dev->i2c_adap, 0x08, 0, 0) == NULL) {
> +					wprintk("%s: Medion Quadro, no ISL6405 "
>  						"found !\n", __func__);
>  					goto dettach_frontend;
>  				}
> -				if (dev_id != 0x08) {
> -					/* we need to open the i2c gate (we know it exists) */
> -					fe->ops.i2c_gate_ctrl(fe, 1);
> -					if (dvb_attach(isl6405_attach, fe,
> -							&dev->i2c_adap, 0x08, 0, 0) == NULL) {
> -						wprintk("%s: Medion Quadro, no ISL6405 "
> -							"found !\n", __func__);
> -						goto dettach_frontend;
> -					}
> -					if (dev_id == 0x07) {
> -						/* fire up the 2nd section of the LNB supply since
> -						   we can't do this from the other section */
> -						msg.buf = &data;
> -						i2c_transfer(&dev->i2c_adap, &msg, 1);
> -					}
> -					fe->ops.i2c_gate_ctrl(fe, 0);
> -					dev->original_set_voltage = fe->ops.set_voltage;
> -					fe->ops.set_voltage = md8800_set_voltage;
> -					dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
> -					fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
> -				} else {
> -					fe->ops.set_voltage = md8800_set_voltage2;
> -					fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
> +				if (dev_id == 0x07) {
> +					/* fire up the 2nd section of the LNB supply since
> +						we can't do this from the other section */
> +					msg.buf = &data;
> +					i2c_transfer(&dev->i2c_adap, &msg, 1);
>  				}
> +				dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 0);
> +				dev->original_set_voltage = dvb_fe->ops.set_voltage;
> +				dvb_fe->ops.set_voltage = md8800_set_voltage;
> +				dev->original_set_high_voltage = dvb_fe->ops.enable_high_lnb_voltage;
> +				dvb_fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
> +			} else {
> +				dvb_fe->ops.set_voltage = md8800_set_voltage2;
> +				dvb_fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
>  			}
>  		}
>  		break;
>  	case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
> -		fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
> +		last_fe->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend)
> -			dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
> +		if (last_fe->dvb.frontend)
> +			dvb_attach(dvb_pll_attach, last_fe->dvb.frontend, 0x61,
>  				   NULL, DVB_PLL_TDHU2);
>  		break;
>  	case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
>  	case SAA7134_BOARD_KWORLD_ATSC110:
> -		fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
> +		last_fe->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend)
> -			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend)
> +			dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, 0x61,
>  				   TUNER_PHILIPS_TUV1236D);
>  		break;
>  	case SAA7134_BOARD_FLYDVBS_LR300:
> -		fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
> +		last_fe->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
> +		if (last_fe->dvb.frontend) {
> +			if (dvb_attach(tda826x_attach, last_fe->dvb.frontend, 0x60,
>  				       &dev->i2c_adap, 0) == NULL) {
>  				wprintk("%s: No tda826x found!\n", __func__);
>  				goto dettach_frontend;
>  			}
> -			if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
> +			if (dvb_attach(isl6421_attach, last_fe->dvb.frontend,
>  				       &dev->i2c_adap, 0x08, 0, 0) == NULL) {
>  				wprintk("%s: No ISL6421 found!\n", __func__);
>  				goto dettach_frontend;
> @@ -1356,72 +1404,72 @@ static int dvb_init(struct saa7134_dev *
>  		}
>  		break;
>  	case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
> -		fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>  					       &medion_cardbus,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
> -			fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
> +		if (last_fe->dvb.frontend) {
> +			dev->original_demod_sleep = last_fe->dvb.frontend->ops.sleep;
> +			last_fe->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
> 
> -			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +			dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, medion_cardbus.tuner_address,
>  				   TUNER_PHILIPS_FMD1216ME_MK3);
>  		}
>  		break;
>  	case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
> -		fe0->dvb.frontend = dvb_attach(tda10046_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10046_attach,
>  				&philips_europa_config,
>  				&dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
> -			fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
> +		if (last_fe->dvb.frontend) {
> +			last_fe->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
> +			last_fe->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
>  		}
>  		break;
>  	case SAA7134_BOARD_CINERGY_HT_PCMCIA:
> -		if (configure_tda827x_fe(dev, &cinergy_ht_config,
> +		if (configure_tda827x_fe(dev, last_fe, &cinergy_ht_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_CINERGY_HT_PCI:
> -		if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
> +		if (configure_tda827x_fe(dev, last_fe, &cinergy_ht_pci_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_PHILIPS_TIGER_S:
> -		if (configure_tda827x_fe(dev, &philips_tiger_s_config,
> +		if (configure_tda827x_fe(dev, last_fe, &philips_tiger_s_config,
>  					 &tda827x_cfg_2) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_ASUS_P7131_4871:
> -		if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
> +		if (configure_tda827x_fe(dev, last_fe, &asus_p7131_4871_config,
>  					 &tda827x_cfg_2) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
> -		if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
> +		if (configure_tda827x_fe(dev, last_fe, &asus_p7131_hybrid_lna_config,
>  					 &tda827x_cfg_2) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_AVERMEDIA_SUPER_007:
> -		if (configure_tda827x_fe(dev, &avermedia_super_007_config,
> +		if (configure_tda827x_fe(dev, last_fe, &avermedia_super_007_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
> -		if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
> +		if (configure_tda827x_fe(dev, last_fe, &twinhan_dtv_dvb_3056_config,
>  					 &tda827x_cfg_2_sw42) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_PHILIPS_SNAKE:
> -		fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
> +		last_fe->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
>  						&dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
> +		if (last_fe->dvb.frontend) {
> +			if (dvb_attach(tda826x_attach, last_fe->dvb.frontend, 0x60,
>  					&dev->i2c_adap, 0) == NULL) {
>  				wprintk("%s: No tda826x found!\n", __func__);
>  				goto dettach_frontend;
>  			}
> -			if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
> +			if (dvb_attach(lnbp21_attach, last_fe->dvb.frontend,
>  					&dev->i2c_adap, 0, 0) == NULL) {
>  				wprintk("%s: No lnbp21 found!\n", __func__);
>  				goto dettach_frontend;
> @@ -1429,12 +1477,12 @@ static int dvb_init(struct saa7134_dev *
>  		}
>  		break;
>  	case SAA7134_BOARD_CREATIX_CTX953:
> -		if (configure_tda827x_fe(dev, &md8800_dvbt_config,
> +		if (configure_tda827x_fe(dev, last_fe, &md8800_dvbt_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
> -		if (configure_tda827x_fe(dev, &philips_tiger_s_config,
> +		if (configure_tda827x_fe(dev, last_fe, &philips_tiger_s_config,
>  					 &tda827x_cfg_2) < 0)
>  			goto dettach_frontend;
>  		break;
> @@ -1443,7 +1491,7 @@ static int dvb_init(struct saa7134_dev *
>  		saa7134_set_gpio(dev, 25, 0);
>  		msleep(10);
>  		saa7134_set_gpio(dev, 25, 1);
> -		fe0->dvb.frontend = dvb_attach(mt352_attach,
> +		last_fe->dvb.frontend = dvb_attach(mt352_attach,
>  						&avermedia_xc3028_mt352_dev,
>  						&dev->i2c_adap);
>  		attach_xc3028 = 1;
> @@ -1453,18 +1501,18 @@ static int dvb_init(struct saa7134_dev *
>  	case SAA7134_BOARD_VIDEOMATE_T750:
>  #endif
>  	case SAA7134_BOARD_MD7134_BRIDGE_2:
> -		fe0->dvb.frontend = dvb_attach(tda10086_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10086_attach,
>  						&sd1878_4m, &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> +		if (last_fe->dvb.frontend) {
>  			struct dvb_frontend *fe;
> -			if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
> +			if (dvb_attach(dvb_pll_attach, last_fe->dvb.frontend, 0x60,
>  				  &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
>  				wprintk("%s: MD7134 DVB-S, no SD1878 "
>  					"found !\n", __func__);
>  				goto dettach_frontend;
>  			}
>  			/* we need to open the i2c gate (we know it exists) */
> -			fe = fe0->dvb.frontend;
> +			fe = last_fe->dvb.frontend;
>  			fe->ops.i2c_gate_ctrl(fe, 1);
>  			if (dvb_attach(isl6405_attach, fe,
>  					&dev->i2c_adap, 0x08, 0, 0) == NULL) {
> @@ -1483,67 +1531,70 @@ static int dvb_init(struct saa7134_dev *
>  		saa7134_set_gpio(dev, 25, 0);
>  		msleep(10);
>  		saa7134_set_gpio(dev, 25, 1);
> -		fe0->dvb.frontend = dvb_attach(mt352_attach,
> +		last_fe->dvb.frontend = dvb_attach(mt352_attach,
>  						&avermedia_xc3028_mt352_dev,
>  						&dev->i2c_adap);
>  		attach_xc3028 = 1;
>  		break;
>  	case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
> -		if (!use_frontend) {     /* terrestrial */
> -			if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
> -							&tda827x_cfg_2) < 0)
> +		/* terrestrial */
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, 1);
> +		if (configure_tda827x_fe(dev, fe, &asus_tiger_3in1_config,
> +						&tda827x_cfg_2) < 0)
> +			goto dettach_frontend;
> +
> +		/* satellite */
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, 2);
> +		fe->dvb.frontend = dvb_attach(tda10086_attach,
> +					&flydvbs, &dev->i2c_adap);
> +		if (fe->dvb.frontend) {
> +			fe->dvb.frontend->id = 1;
> +			if (dvb_attach(tda826x_attach,
> +					fe->dvb.frontend, 0x60,
> +					&dev->i2c_adap, 0) == NULL) {
> +				wprintk("%s: Asus Tiger 3in1, no "
> +					"tda826x found!\n", __func__);
> +				goto dettach_frontend;
> +			}
> +			if (dvb_attach(lnbp21_attach, fe->dvb.frontend,
> +					&dev->i2c_adap, 0, 0) == NULL) {
> +				wprintk("%s: Asus Tiger 3in1, no lnbp21"
> +					" found!\n", __func__);
>  				goto dettach_frontend;
> -		} else {  		/* satellite */
> -			fe0->dvb.frontend = dvb_attach(tda10086_attach,
> -						&flydvbs, &dev->i2c_adap);
> -			if (fe0->dvb.frontend) {
> -				if (dvb_attach(tda826x_attach,
> -						fe0->dvb.frontend, 0x60,
> -						&dev->i2c_adap, 0) == NULL) {
> -					wprintk("%s: Asus Tiger 3in1, no "
> -						"tda826x found!\n", __func__);
> -					goto dettach_frontend;
> -				}
> -				if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
> -						&dev->i2c_adap, 0, 0) == NULL) {
> -					wprintk("%s: Asus Tiger 3in1, no lnbp21"
> -						" found!\n", __func__);
> -					goto dettach_frontend;
> -				}
>  			}
>  		}
>  		break;
>  	case SAA7134_BOARD_ASUSTeK_TIGER:
> -		if (configure_tda827x_fe(dev, &philips_tiger_config,
> +		if (configure_tda827x_fe(dev, last_fe, &philips_tiger_config,
>  					 &tda827x_cfg_0) < 0)
>  			goto dettach_frontend;
>  		break;
>  	case SAA7134_BOARD_BEHOLD_H6:
> -		fe0->dvb.frontend = dvb_attach(zl10353_attach,
> +		last_fe->dvb.frontend = dvb_attach(zl10353_attach,
>  						&behold_h6_config,
>  						&dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend) {
> +			dvb_attach(simple_tuner_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, 0x61,
>  				   TUNER_PHILIPS_FMD1216MEX_MK3);
>  		}
>  		break;
>  	case SAA7134_BOARD_BEHOLD_X7:
> -		fe0->dvb.frontend = dvb_attach(zl10353_attach,
> +		last_fe->dvb.frontend = dvb_attach(zl10353_attach,
>  						&behold_x7_config,
>  						&dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			dvb_attach(xc5000_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend) {
> +			dvb_attach(xc5000_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, &behold_x7_tunerconfig);
>  		}
>  		break;
>  	case SAA7134_BOARD_AVERMEDIA_A700_PRO:
>  	case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
>  		/* Zarlink ZL10313 */
> -		fe0->dvb.frontend = dvb_attach(mt312_attach,
> +		last_fe->dvb.frontend = dvb_attach(mt312_attach,
>  			&avertv_a700_mt312, &dev->i2c_adap);
> -		if (fe0->dvb.frontend) {
> -			if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend) {
> +			if (dvb_attach(zl10036_attach, last_fe->dvb.frontend,
>  					&avertv_a700_tuner, &dev->i2c_adap) == NULL) {
>  				wprintk("%s: No zl10036 found!\n",
>  					__func__);
> @@ -1551,37 +1602,37 @@ static int dvb_init(struct saa7134_dev *
>  		}
>  		break;
>  	case SAA7134_BOARD_VIDEOMATE_S350:
> -		fe0->dvb.frontend = dvb_attach(mt312_attach,
> +		last_fe->dvb.frontend = dvb_attach(mt312_attach,
>  				&zl10313_compro_s350_config, &dev->i2c_adap);
> -		if (fe0->dvb.frontend)
> -			if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend)
> +			if (dvb_attach(zl10039_attach, last_fe->dvb.frontend,
>  					0x60, &dev->i2c_adap) == NULL)
>  				wprintk("%s: No zl10039 found!\n",
>  					__func__);
> 
>  		break;
>  	case SAA7134_BOARD_ZOLID_HYBRID_PCI:
> -		fe0->dvb.frontend = dvb_attach(tda10048_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10048_attach,
>  					       &zolid_tda10048_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend != NULL) {
> -			dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend != NULL) {
> +			dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, 0x4b,
>  				   &tda829x_no_probe);
> -			dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +			dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>  				   0x60, &dev->i2c_adap,
>  				   &zolid_tda18271_config);
>  		}
>  		break;
>  	case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
> -		fe0->dvb.frontend = dvb_attach(tda10048_attach,
> +		last_fe->dvb.frontend = dvb_attach(tda10048_attach,
>  					       &dtv1000s_tda10048_config,
>  					       &dev->i2c_adap);
> -		if (fe0->dvb.frontend != NULL) {
> -			dvb_attach(tda829x_attach, fe0->dvb.frontend,
> +		if (last_fe->dvb.frontend != NULL) {
> +			dvb_attach(tda829x_attach, last_fe->dvb.frontend,
>  				   &dev->i2c_adap, 0x4b,
>  				   &tda829x_no_probe);
> -			dvb_attach(tda18271_attach, fe0->dvb.frontend,
> +			dvb_attach(tda18271_attach, last_fe->dvb.frontend,
>  				   0x60, &dev->i2c_adap,
>  				   &dtv1000s_tda18271_config);
>  		}
> @@ -1598,10 +1649,10 @@ static int dvb_init(struct saa7134_dev *
>  			.i2c_addr  = 0x61,
>  		};
> 
> -		if (!fe0->dvb.frontend)
> +		if (!last_fe->dvb.frontend)
>  			goto dettach_frontend;
> 
> -		fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
> +		fe = dvb_attach(xc2028_attach, last_fe->dvb.frontend, &cfg);
>  		if (!fe) {
>  			printk(KERN_ERR "%s/2: xc3028 attach failed\n",
>  			       dev->name);
> @@ -1609,27 +1660,40 @@ static int dvb_init(struct saa7134_dev *
>  		}
>  	}
> 
> -	if (NULL == fe0->dvb.frontend) {
> -		printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
> -		goto dettach_frontend;
> +	for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, i);
> +		if ((!fe) || (NULL == fe->dvb.frontend)){
> +			printk(KERN_ERR "%s/dvb: frontend %d initialization failed\n", dev->name, i);
> +			goto dettach_frontend;
> +		}
> +
> +		/* define general-purpose callback pointer */
> +		fe->dvb.frontend->callback = saa7134_tuner_callback;
> +
> +		/* override bus control override */
> +		fe->dvb.frontend->ops.ts_bus_ctrl = saa7134_dvb_bus_ctrl;
>  	}
> -	/* define general-purpose callback pointer */
> -	fe0->dvb.frontend->callback = saa7134_tuner_callback;
> 
>  	/* register everything else */
>  	ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
>  					&dev->pci->dev, adapter_nr, 0, NULL);
> +	if (ret) {
> +		printk(KERN_ERR "%s/dvb: register frontend(s) failed\n", dev->name);
> +		goto dettach_frontend;
> +	}
> 
> -	/* this sequence is necessary to make the tda1004x load its firmware
> -	 * and to enter analog mode of hybrid boards
> -	 */
> -	if (!ret) {
> -		if (fe0->dvb.frontend->ops.init)
> -			fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
> -		if (fe0->dvb.frontend->ops.sleep)
> -			fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
> -		if (fe0->dvb.frontend->ops.tuner_ops.sleep)
> -			fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
> +	for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, i);
> +
> +		/* this sequence is necessary to make the tda1004x load its firmware
> +		* and to enter analog mode of hybrid boards
> +		*/
> +		if (fe->dvb.frontend->ops.init)
> +			fe->dvb.frontend->ops.init(fe->dvb.frontend);
> +		if (fe->dvb.frontend->ops.sleep)
> +			fe->dvb.frontend->ops.sleep(fe->dvb.frontend);
> +		if (fe->dvb.frontend->ops.tuner_ops.sleep)
> +			fe->dvb.frontend->ops.tuner_ops.sleep(fe->dvb.frontend);
>  	}
>  	return ret;
> 
> @@ -1640,37 +1704,41 @@ dettach_frontend:
> 
>  static int dvb_fini(struct saa7134_dev *dev)
>  {
> -	struct videobuf_dvb_frontend *fe0;
> -
> -	/* Get the first frontend */
> -	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
> -	if (!fe0)
> -		return -EINVAL;
> +	int i;
> +	struct videobuf_dvb_frontend *fe;
> 
> -	/* FIXME: I suspect that this code is bogus, since the entry for
> -	   Pinnacle 300I DVB-T PAL already defines the proper init to allow
> -	   the detection of mt2032 (TDA9887_PORT2_INACTIVE)
> -	 */
> -	if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
> -		struct v4l2_priv_tun_config tda9887_cfg;
> -		static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
> -
> -		tda9887_cfg.tuner = TUNER_TDA9887;
> -		tda9887_cfg.priv  = &on;
> -
> -		/* otherwise we don't detect the tuner on next insmod */
> -		saa_call_all(dev, tuner, s_config, &tda9887_cfg);
> -	} else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
> -		if ((dev->eedata[2] == 0x07) && use_frontend) {
> -			/* turn off the 2nd lnb supply */
> -			u8 data = 0x80;
> -			struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
> -			struct dvb_frontend *fe;
> -			fe = fe0->dvb.frontend;
> -			if (fe->ops.i2c_gate_ctrl) {
> -				fe->ops.i2c_gate_ctrl(fe, 1);
> -				i2c_transfer(&dev->i2c_adap, &msg, 1);
> -				fe->ops.i2c_gate_ctrl(fe, 0);
> +	for (i = 1; i <= saa7134_boards[dev->board].num_frontends; i++) {
> +		fe = videobuf_dvb_get_frontend(&dev->frontends, i);
> +		if (!fe){
> +			printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i);
> +			continue;
> +		}
> +
> +		/* FIXME: I suspect that this code is bogus, since the entry for
> +		Pinnacle 300I DVB-T PAL already defines the proper init to allow
> +		the detection of mt2032 (TDA9887_PORT2_INACTIVE)
> +		*/
> +		if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
> +			struct v4l2_priv_tun_config tda9887_cfg;
> +			static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
> +
> +			tda9887_cfg.tuner = TUNER_TDA9887;
> +			tda9887_cfg.priv  = &on;
> +
> +			/* otherwise we don't detect the tuner on next insmod */
> +			saa_call_all(dev, tuner, s_config, &tda9887_cfg);
> +		} else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
> +			if ((dev->eedata[2] == 0x07) && (fe->id == 2)) {
> +				/* turn off the 2nd lnb supply */
> +				u8 data = 0x80;
> +				struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
> +				struct dvb_frontend *dvb_fe;
> +				dvb_fe = fe->dvb.frontend;
> +				if (dvb_fe->ops.i2c_gate_ctrl) {
> +					dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 1);
> +					i2c_transfer(&dev->i2c_adap, &msg, 1);
> +					dvb_fe->ops.i2c_gate_ctrl(dvb_fe, 0);
> +				}
>  			}
>  		}
>  	}
> diff -uprN ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134.h ./linux/drivers/media/video/saa7134/saa7134.h
> --- ./linux-a76d06e9ff9b/drivers/media/video/saa7134/saa7134.h	2009-10-31 10:40:46.000000000 +0100
> +++ ./linux/drivers/media/video/saa7134/saa7134.h	2009-10-31 17:22:48.000000000 +0100
> @@ -359,6 +359,7 @@ struct saa7134_board {
>  	unsigned int            tuner_config;
> 
>  	/* peripheral I/O */
> +	unsigned char 		num_frontends;
>  	enum saa7134_video_out  video_out;
>  	enum saa7134_mpeg_type  mpeg;
>  	enum saa7134_mpeg_ts_type ts_type;

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux